Escalade Sports G05611 User Manual

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

1-866-556-2759

FAX: [phone]

[e-mail]

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Please have your model number when inquiring about parts.

When contacting Escalade S port s please provide your model number, serial number (if
applicable), and part number if requesting a replacement part. These numbers are
located on the product, packaging, and in this owners manual.

Y our Model Number _______________________

G05611

IMPORTANT! READ THIS MANUAL ALL THE
WAY THROUGH BEFORE BEGINNING TO
PUT YOUR GAME TABLE TOGETHER!
THEN READ EACH STEP BEFORE START­ING THAT STEP.

TWO ADUL TS ARE REQUIRED TO ASSEMBLE

THIS GAME TABLE

Tools Required:

Allen Wrenchs H11 and H12 included with the table
Phillips Screwdriver
Furniture Polish and Cloth

An electric screwdriver is helpful in assembly. However, please set at low torque and use
extreme caution with an electric screwdriver because you could overtighten the hardware
and strip the screws.

Assembly Tips

Make sure you understand the following tips before you begin to assemble your multi-game table.

1. When installing parts that have more than one bolt, start ALL the bolts in that part by
hand before tightening anything.

2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.

READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND

SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO

ADULTS ARE NEEDED TO PUT THIS GAME TABLE

TOGETHER.

© 2004 Escalade Sports

2 For Customer Service Call 1-866-556-2759

© 2004 Escalade Sports

3 For Customer Service Call 1-866-556-2759

© 2004 Escalade Sports

4 For Customer Service Call 1-866-556-2759

© 2004 Escalade Sports

5 For Customer Service Call 1-866-556-2759

© 2004 Escalade Sports

6 For Customer Service Call 1-866-556-2759

© 2004 Escalade Sports

7 For Customer Service Call 1-866-556-2759

© 2004 Escalade Sports

8 For Customer Service Call 1-866-556-2759

1. Find a clean, level place to begin the assembly of your game table. We
recommend building the table on the box top to protect the parts during
assembly.

2. Place the main cabinet P1 UPSIDE DOWN as shown in FIGURE 1.

3. Using the Allen wrench provided H12, attach the legs P10 using bolts H1 and
washers H7 as shown in FIGURE 1. Remember to start all hardware
by hand before you tighten anything.

Figure 1

4. Tighten all hardware at this time.

© 2004 Escalade Sports

CAUTION:

Start all hardware by hand before
you tighten anything.

9 For Customer Service Call 1-866-556-2759

THIS STEP REQUIRES TWO OR MORE ADULTS.

VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON

ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY.

5. After you have turned the billiard table over set it aside and complete the
following steps for the soccer table assembly.

© 2004 Escalade Sports

10 For Customer Service Call 1-866-556-2759

6. Find a clean, level place to begin the assembly of your soccer table. We
recommend building the table on the box top to protect the parts during
assembly.

7. Place one side panel P1 UPSIDE DOWN with the finished side facing out
as shown in FIGURE 2. The ball entry hole will be closest to the floor.

8. Attach the end panels P3 to the side panel P1 using bolts H3 and washers H2
as shown in FIGURE 2.

Figure 2

9. Align the rods as shown in FIGURE 3. Please note the location of the hole that is
near one end of each rod. This is the handle end of the rod. There will be four
handles on each side of the table. It is critical that you set the rods as shown below
so the table will be correct when flipped over.

Figure 3

© 2004 Escalade Sports

11 For Customer Service Call 1-866-556-2759