We strive to ensure that our products are of the highest quality and
free of manufacturing defects or missing parts. However, if you
have any problems with your new product,
DO NOT RETURN IT TO THE STORE,
please contact us toll free @:
1-866-556-2759
FAX: 1-866-873-3531
foosball@escaladesports.com
Or write to:
Escalade Sports
Customer Service Department
P.O. Box 889
Evansville IN 47706
Please have your model number when inquiring about parts.
When contacting Escalade Sports please provide your model number, serial number
(if applicable), and part number if requesting a replacement part. These numbers are
located on the product, packaging, and in this owners manual.
Your Model Number _______________________
G05608
IMPORTANT! READ THIS MANUAL ALL THE
WAY THROUGH BEFORE BEGINNING TO
PUT YOUR GAME TABLE TOGETHER!
THEN READ EACH STEP BEFORE STARTING THAT STEP.
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS GAME TABLE
Tools Required:
Allen Wrench Included with the Hardware Kit
Phillips Screwdriver
Furniture Polish and Cloth
An electric screwdriver is helpful in assembly. However, please set at low torque and use
extreme caution with an electric screwdriver because you could overtighten the hardware
and strip the screws.
Assembly Tip s
Make sure you understand the following tips before you begin to assemble your soccer table.
1. When installing parts that have more than one bolt, start ALL the bolts in that part by
hand before tightening anything.
2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO PUT THIS GAME TABLE
TOGETHER.
© 2002 Escalade Sports
2 For Customer Service Call 1-866-556-2759
© 2002 Escalade Sports
3 For Customer Service Call 1-866-556-2759
© 2002 Escalade Sports
4 For Customer Service Call 1-866-556-2759
© 2002 Escalade Sports
5 For Customer Service Call 1-866-556-2759
© 2002 Escalade Sports
6 For Customer Service Call 1-866-556-2759
1. Find a clean, level place to begin the assembly of your game table. We
recommend building the table on the box top to protect the parts during
assembly.
2. Place the hockey table P7 UPSIDE DOWN as shown in FIGURE 1.
3. Using the Allen wrench provided, attach the legs P4 and P5 using bolts H1
and washers H2 as shown in FIGURE 1. Remember to start all hardware
by hand before you tighten anything.
4. Attach the leg panel P8 to the inside of the legs using screw H10 as shown
in FIGURE 1. Next attach the spreader P8A using screw H11 as shown
in FIGURE 1.
CAUTION:
Start all hardware by hand before
you tighten anything.
Figure 1
5. Tighten all hardware at this time and set the hockey table off to the side
out of the way.
© 2002 Escalade Sports
7 For Customer Service Call 1-866-556-2759
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY.
6. After you have turned the hockey table over set it aside and complete the
following steps for the soccer table assembly.
© 2002 Escalade Sports
8 For Customer Service Call 1-866-556-2759