Escalade Sports G05605 User Manual

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

1-866-556-2759

FAX: [phone]

[e-mail]

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Please have your model number when inquiring about parts.

When contacting Escalade Sports please provide your model number, serial number (if
applicable), and part number if requesting a replacement part. These numbers are
located on the product, packaging, and in this owners manual.

Your Model Number _______________________

© 2003

G05605

1

For Customer Service Call 1-866-556-2759

IMPORTANT! READ THIS MANUAL ALL THE
WAY THROUGH BEFORE BEGINNING TO
PUT YOUR GAME TABLE TOGETHER! THEN
READ EACH STEP BEFORE STARTING
THAT STEP.

TWO ADULTS ARE REQUIRED TO ASSEMBLE

THIS GAME TABLE

Tools Required:

Wrench H6 Included wit h the Hardware Kit
Furniture Polish and Cloth

Assembly Tips

Make sure you understand the following tips before you begin to assemble your soccer table.

1. When installing parts that have more than one bolt, start ALL the bolts in that part by

hand before tightening anything.

2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.

READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND

SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO

ADULTS ARE NEEDED TO PUT THIS GAME TABLE

TOGETHER.

© 2003

2

For Customer Service Call 1-866-556-2759

© 2003

3

For Customer Service Call 1-866-556-2759

© 2003

4

For Customer Service Call 1-866-556-2759

CAUTION:

Attach all parts by hand with the hardware hand tight
before tightening any hardware.

1. Find a clean, level place to begin the assembly of your bumper pool table. We
recommend building the table on the box top to protect the parts during
assembly.

2. Attach each foot to the leg pedestal using a flat washer H4, spit washer
H3 and hex nut H2 as shown in FIGURE 1.

3. Once you have all the parts attached TIGHTEN ALL HARDWARE AT THIS

TIME.

© 2003

Figure 1

5

For Customer Service Call 1-866-556-2759

CAUTION:

Attach all parts by hand with the hardware hand tight
before tightening any hardware.

4. Attach the table support board P5 to the previously made leg assembly using
flat washers H4, spit washers H3 and hex nuts H2 as shown in FIGURE 2.

© 2003

Figure 2

6

For Customer Service Call 1-866-556-2759