Escalade Sports G03604 User Manual

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

1-866-556-2758

FAX: [phone]

[e-mail]

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Please have your model number when inquiring about parts.

When contacting Escalade Sports please provide your model number , serial number (if
applicable), and part number if requesting a replacement part. These numbers are
located on the product, packaging, and in this owners manual.

Y our Model Number _______________________

© 2003 Escalade Sports

G03604

1

For Customer Service Call 1-866-556-2758

I

MPORTANT! READ THIS MANUAL ALL THE
WAY THROUGH BEFORE BEGINNING TO
PUT YOUR GAME TABLE TOGETHER! THEN
READ EACH STEP BEFORE STARTING
THAT STEP.

TWO ADULTS ARE REQUIRED TO ASSEMBLE

THIS GAME TABLE

Tools Required:

Allen Wrench H4 included with the Hardware Kit
Philips Screwdriver
Furniture Polish and Cloth

An electric screwdriver is helpful in assembly. However, please set at low torque and use
extreme caution with an electric screwdriver because you could overtighten the hardware
and strip the screws.

Assembly Tips

Make sure you understand the following tips before you begin to assemble your soccer table.

1. When installing parts that have more than one bolt, start ALL the bolts in that part by
hand before tightening anything.

2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.

READ AND FOLLOW ALL ASSEMBLY , OPERATION, AND

SAFETY INSTRUCTIONS CAREFULLY . AT LEAST TWO

ADULTS ARE NEEDED TO PUT THIS GAME TABLE

TOGETHER.

© 2003 Escalade Sports

2

For Customer Service Call 1-866-556-2758

© 2003 Escalade Sports

3

For Customer Service Call 1-866-556-2758

1. Find a clean, level place to begin the assembly of your hockey table. We
recommend building the table on the box top to protect the parts during
assembly. Place the main cabinet P1 on the ground with the playing surface
facing down.

2. Using the Allen Wrench provided H4, attach the legs P2 to the main
cabinet P1 using bolts H1 and washers H2 as shown in FIGURE 1.
Remember to start all hardware in each leg before you tighten anything.
Repeat this step for all four legs.

Figure 1

VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY.

© 2003 Escalade Sports

THIS STEP REQUIRES TWO OR MORE ADULTS.

4

For Customer Service Call 1-866-556-2758

3. After you have turned to the table over to its upright position attach the
scorers P3 using screws H3 as shown in FIGURE 2.

Figure 2

4. After you have attached the scorers, set the table where you want it
in your Game Room. Plug the cord into a suitable 120v household outlet and
turn the motor on by turning the switch that is built into the cord.

Congratulations! You have now assembled your hockey table. Please note the Care
and Use instructions below to insure many years of trouble free use of your game
table.

CARE AND USE OF YOUR TABLE

1. Apply spray furniture polish to a clean cloth and wipe down the playfield
to make the pucks slide faster on the table.

2. You may use spray furniture polish to clean all exterior surfaces of your game
table.

3. Use only a suitable 120v AC household outlet.

4. This product is intended for INDOOR use only.

5. DO NOT operate the motor if the cord is damaged in any way .

6. DO NOT sit, climb or lean on the table.

7. DO NOT drag the table when moving it. This will damage the legs

© 2003 Escalade Sports

5

For Customer Service Call 1-866-556-2758