Escalade sports G01861 User Manual
Thank you for buying our product. We strive to ensure that our
products are of the highest quality and free of manufacturing de-
fects or missing parts. However, if you have any problems with
your new product, DO NOT RETURN IT TO THE STORE,
please contact us toll free @:
1-866-556-2759
FAX: 1-866-873-3531
foosball@escaladesports.com
Please have your model number when inquiring about parts.
Or write to:
Escalade Sports
Customer Service Department
P.O. Box 889
Evansville IN 47706
When contacting Escalade Sports please provide your model number , serial number (if
applicable), and part number if requesting a replacement part. These numbers are
located on the product, packaging, and in this owners manual.
Y our Model Number _______________________
Y our model number is located on the original carton, this owners manual, and
under the table. Please retain these instructions for ordering parts.
G01861
IMPORTANT! READ THIS MANUAL ALL THE
W AY THROUGH BEFORE BEGINNING TO PUT
YOUR GAME TABLE TOGETHER! THEN READ
EACH STEP BEFORE ST AR TING THA T STEP.
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS GAME TABLE
Tools Needed
Philips Screwdriver
Adjustable Wrench or Socket Set
Furniture Polish and Cloth
An electric screwdriver is helpful in assembly. However, please use extreme caution with an electric
screwdriver because you could overtighten the hardware and strip the screws.
IMPORTANT!
Make sure you understand the following tips before you begin to assemble your soccer table.
1. When installing parts that have more than one bolt, start ALL the bolts in that part by hand
before tightening anything.
2. When the table is complete the Goalie Rod handle should be on your left when standing on
either side of the table. The assembly is done with the table up-side-down. This means every
thing is opposite until the table is turned right-side-up.
3. If your table model has push on type handles you cannot pull them off once installed. Make
sure the rods are correct and you are installing the handle on the correct end of the rod.
4. Do not tighten hardware until the instructions indicate so.
5. Do not overtighten hardware, as you could damage the finish on the table
6. Some drawings or images in this manual may not look exactly like your product.
7. You can apply spray furniture polish to a cloth and wipe down the rods to make them slide
more easily in the bearings.
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULL Y. AT LEAST TWO
ADULTS ARE NEEDED T O PUT THIS GAME TABLE
TOGETHER!
© 2002 Escalade Sports
2 For Customer Service Call 1-866-556-2759
© 2002 Escalade Sports
3 For Customer Service Call 1-866-556-2759
© 2002 Escalade Sports
4 For Customer Service Call 1-866-556-2759
© 2002 Escalade Sports
5 For Customer Service Call 1-866-556-2759
1. Find a clean, level place to begin the assembly
of your game table. We recommend building
the table on the box top to protect the parts
during assembly.
Figure 1
2. Place the main cabinet P1
shown in Figure 1. Unfold the side aprons P1A
and place the end panel P2 as shown. Attach
the L- bracket P12 in the corner with screws H4.
upside down
as
Make sure you align the holes for the
legs when installing the L-bracket.
3. Attach the legs P3 in the corners as shown
in Figure 2 using bolts H1 and washers H2.
Start all leg bolts by hand before you
tighten any of the bolts.
MAKING SURE END PANELS ARE STRAIGHT
TIGHTEN ALL HARDWARE AT THIS TIME.
Figure 2
4. After the legs are tight attach the hinges to the
main cabinet using screws H4.
5. Attach the goal boxes P4 to the end panels
using screws H3. Center the goal box over the
opening in the end panel as shown in Figure 3.
6. Screw one leg leveler H7 into the bottom of each
leg as shown in Figure 3.
Figure 3
© 2002 Escalade Sports
6 For Customer Service Call 1-866-556-2759
Loading...