Erica Synths Fusion 6VAC PSU User Manual

ERICA FUSION 6V AC PSU INSTALLATIONERICA FUSION 6V AC PSU

THANK YOU FOR ORDERING

ERICA FUSION MODULE!

The Erica Synths Fusion series modules are designed com bin­ing vacuum tubes and semiconduc tors therefore they bring
warm, power ful sound and crazy overdrive possibilities of
vacuum tubes into your modular syst em. Erica Fusion series
consist of whole range of modules used in sound generation
and shaping circuit – pure sine VCO with unique tube wavesh­aper, VCO signal Mixer, Ringmodulator, VCF, VCA and Analog ue
Delay/Chorus. Erica Fusion modules have insignificant (max
15mA) power consumption from eurorack power supply unit
(PSU), but they require separate, easy to install 6VAC PSU for
tube heaters. Erica Fusion 6VAC PSU is designed to power up to
7 Erica Fusion modules and is available from Erica Synths
SHOP or comes for free with pur chase of 2 or more Erica Fusion
modules.

It is advised that ins tallation is per formed by
person, who has experience working with

220/110V voltages. Before installing the PSU,
make sure your modular system is turned off and discon­nected fro m wall power socket.

Follow simple ins tructions below, and you will not go
wrong with t he ins tallation!

Make sure your Erica Fu sion 6VAC PSU is configured for
power supply voltage in your countr y!

ERICA FUSION 6V AC PSU INSTALLATION

Use spacers and screws supplied with the Erica Fusion
PSU kit to fix it in your modular case next to the eurorack
power supply unit!

Disconnec t 220/110V wires from eurorack P SU!

Connect 220/110V wires to relevant lug s of Erica Fusion
PSU!