
Portable
Vibration
Analyzer
EI-CALC
PORTABLE VIBRATION ANALYZER
Overview
EI-Calc is a Real-Time 1-Ch Vibration Analyzer with a
wide range of powerful FFT spectral analysis tools and
an easy-to-use visualization interface.
Features
Real time signal and FFT display
Gear box frequency calculation
Diagnosis tool
Only for illustrative purposes.
Crest factor
Million point FFT calculation
Import and export ASCII files
Acceleration, Velocity and Displacement
measurements
Early detection of bearing failures (acceleration
envelope)
Analysis Tools
Units ( g, mm/s
FFT Windows: Rectangular, Hanning, Hamming, Flap-
top, Blackman, Bartlett, Kaiser,4-TermCosSum,6-TermCosSum & 11-TermCosSum.
2
2
, mm/s, in/s, um, mils, gE)

EI-Calc includes:
EI-CALC
PORTABLE VIBRATION ANALYZER
Accelerometer
Dynamic Impact Shock: 50g peak (max
shock 5000g)
Freq. response (+/- 3dB): 0.32 - 13 000 Hz
Freq. response (+/- 10%): 2 - 10000 Hz
Sensitivity: 100 mV/g +/- 10%
Transverse sensitivity: < 5%
Power supply: 18-30 V / 3-8 mA
Short-circuit protection
Operation temp.: −10 - 50 °C
Protection grade: IP 68
Impact resistance: IEC 60028-27
Standard 2-Pin MIL connector
Includes 2-Pin to 4-Pin cable and Magnetic
Base
Stainless steel body
Weight 50g
1-Channel interface
Dimensions: 6cm x 2cm x 1cm
Sample rate: 11 025, 22 050, 44 100Hz
Weight: 12 grams (w/o cable)
Channels: 1
Plug and play ready
Calibrator
So Case
Installation CD
& User Manual
Soware highlights
Displacement: 0.05 um to 30 mm (0.002 to 1200 mils)
Velocity: 0.002 to 3000 mm/s (0.0001 to 120 mm/s)
Acceleration: 0.0001 to 50 G’s PP
Lines of resolution: > 2 000 000
FFT windows: Rectangular, Hanning, Hamming, Flaptop, Blackman, CosSum, Bartlett, Kaiser
System requirements.
Minimum requirements for the computer or tablet* to install EI-Calc:
Intel ® Celeron ® (1.60GHz / 400MHz FSB) or higher
1GB RAM DDR2 or higher
Windows 10(works on Windows 7,8 & 8.1*)
SVGA display or higher (touch enabled displays are
supported)
300 MB minimum free hard disk space
USB Port
*Windows RT devices are not supported.
3

Service & Support Engineer
1-877-223-4606 /+52 (55) 6280-7654 / 7592-2130
support@erbessd-instruments.com
support@erbessdreliability.com
Sales
info@erbessd-instruments.com
info@erbessdreliability.com
Buy Online
www.erbessd-instruments.com
www.erbessdreliability.com
ALL IMAGES ARE FO
ON THE VERSION AND/OR THE IMPROVEMENTS MADE TO THE DEVICES OR COMPONENTS
R ILLUSTRATIVE PURPOSES ONLY. THE FINAL PRODUCT MAY VARY DEPENDING
© 2017 ERBESSD RELIABILTY INSTRUMENTS
D-2017.0223.16