Epson StylusRIP for Windows low Service Manual

All rights reserved. No part of this publication may be reproduced, stored in a retrieval
o
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The inf ormation contained herein is desig ned only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers.
SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.
Adobe, PageMaker, PostScript, and the PostScript logo are trademarks of Adobe Systems Incorporated which may be registered in certain jurisdictions.
Apple, the Apple logo, LaserWriter, LocalTalk, Performa, and Power Macintosh are trademarks of Appl e Com puter , Inc.
EPSON i s a regis tered trademark and EPSON Stylus and EPSON St ylusRIP are trad emarks of SEIKO EPSON CO RPORATION.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON discla i ms any and all ri ghts in those marks.
Copyright © 19 97 by SEI KO EPSON CORPORA TION, Nagano, Japan.
User’s Guide
ii

Contents

Introduction
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Chapter 1 Installing StylusRIP in Your PC
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . 1-1
What to Check Before Setting Up StylusRIP . . . . . . . . . . . 1-2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Color Matching . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
ICC Support . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Chapter 2 Installing StylusRIP in Your Printer
Chapter 3 Printing With StylusRIP Server
Using the StylusRIP Server . . . . . . . . . . . . . . . . . . . . . 3-1
Exiting the StylusRIP Server . . . . . . . . . . . . . . . . . . . . 3-2
Checking Print Status . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Using the Preferences Dialog Box . . . . . . . . . . . . . . . . . 3-4
Selecting and Setting Up the StylusRIP Server . . . . . . . . . 3-6
Starting the StylusRIP Server automatically . . . . . . . . . 3-10
Using the Device Options Menu . . . . . . . . . . . . . . . . . 3-11
Things to check for when using roll paper and single sheets 3-12
Changing the Graphics Resolution Setting . . . . . . . . . . 3-13
Printing the PostScript file from your application . . . . . . . . 3-14
iii
Chapter 4 Troubleshooting
Troubleshooting Hints . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Getting the Best Print Quality . . . . . . . . . . . . . . . . . . 4-1
Printer prints out illegible type or characters . . . . . . . . . 4-2
Wrong fonts or jagged type . . . . . . . . . . . . . . . . . . . 4-2
StylusRIP takes a long time before printing starts . . . . . . 4-3
EPS files do not print . . . . . . . . . . . . . . . . . . . . . . 4-3
Bitmap images or clip art looks jagged . . . . . . . . . . . . 4-3
TIFF images and simple text files do not print . . . . . . . . 4-3
There are white lines on the output . . . . . . . . . . . . . . 4-3
StylusRIP does not run from Navigator or other special
desktops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Printout has misplaced images or type . . . . . . . . . . . . 4-4
PPD in PageMaker 6.0 is missing . . . . . . . . . . . . . . . . 4-4
Glossary
Index
iv

Introduction

EPSON® StylusRIP is software for use with Windows 95® that turns your EPSON Stylus printer into a PostScript printer. StylusRIP processes raster images for your PC, reads and interprets Adobe Level 2 PostScript, and allows your EPSON Stylus printer to print color raster images.
Adobe PostScript is the standard for high quality graphic output. All elements of a document, including text, graphics, and images are processed, stored, and reproduced using the PostScript code. When you print from an application, such as
®
PageMaker
, StylusRIP processes the PostScript code and sends
the processed image to the printer.
Features
q
Enables PostScript printing StylusRIP enables an EPSON Stylus printer connected to a PC to perform as a PostScript printer.
q
Compliance with the network By using the folder sharing function of Windows 95, you can print from other PCs on the network.
®
Introductio n
1
2
Introduction
Chapter 1

Installing StylusRIP in Your PC

Before you install the StylusRIP software in your PC, make sure your PC meets the system requirements listed below.
System Requirements
Your PC needs to meet the following configuration requirements to use StylusRIP, whether in a standalone or network environment:
q
At least 13 MB of RAM (15 MB recommended). Also, any memory requirements for optional software must be added to this total.
q
At least 12 MB of available disk space. As the number of files in the jobs folder increases, the amount of required disk space also increases.
q
Windows 95 operating system
1
q
CPU: i486 or later, Pentium 133 MHz or faster is recommended.
q
CD-ROM drive is required.
Installing StylusRIP in Your PC
1-1
What to Check Before Setting Up StylusRIP
Before setting up StylusRIP, make sure your system meets the
minimum hardware and software requirements listed above,
and install any necessary fonts and printer drivers in your PC.
See your font installation software and printer user’s guides for
more details.
Note:
Read the “README” file provided on the StylusRIP floppy disk
before setting up StylusRIP. The README file contains some
important notices and the latest information concerning StylusRIP.
Also, be sure to note the following when setting up StylusRIP.
q
Make sure that the original Disk 1 is not write-protected; the tab in the upper-left corner on the back of the floppy disk must be closed. You cannot use a copied disk or disk that is write-protected.
q
Turn off all virus protection. For instructions on how to do this, see your virus protection or Windows documentation.
q
Close all other active applications.
1-2
q
Carefully choose which printer to install the software in; you can install the software in only one printer.
q
Be sure to print a self test for the printer in question to make sure the printer is operating properly. Also, make sure the printer and PC are connected correctly.
q
Remove all other printer drivers which access the LPT port (or change the port).
Installing StylusRIP in Your PC
Installation
Follow these steps:
1. Make sure Windows 95 is running.
2. Insert the Disk 1 and the CD-ROM into the appropriate drives.
3. Click Start, then choose Run.
4. Type A:\SETUP; then click Finish. (If your floppy disk drive has a different drive letter, substitute it for A:\.)
1
5. Click Next.
Installing StylusRIP in Your PC
1-3
6. Click
for the default installation.
Next
Note:
The installer saves the StylusRIP files to your hard disk. If you want to install the files somewhere other than your hard disk, choose the destination.
7. The program installs all files necessary to run StylusRIP. When installation is complete, make the Preference settings, if necessary. See the "Using the Preferences Dialog Box," on page 3-4.
1-4
Installing StylusRIP in Your PC
Color Matching
During the StylusRIP installation, the ICC profiles are installed in the StylusRIP Utilities folder.
ICC Support
For applications that support ICC (International Color Consortium), use the ICC profiles that are included in the StylusRIP software.
For installation instructions, refer to the README file in the ICC PROFILE folder.
1
Installing StylusRIP in Your PC
1-5
1-6
Installing StylusRIP in Your PC
Loading...
+ 30 hidden pages