Epson Stylus NX115 Notices

Epson Stylus NX110 Series

®

Notices and Warranty

Avis et garantie

This booklet contains safety information, compliance statements,
and your Epson America, Inc. Limited Warranty. page 2

Le présent document présente les consignes de sécurité, les déclarations
de conformité et votre Garantie limitée Epson America, Inc. page 9

Notices

English

Important Safety Instructions

Before using your NX110 Series, read and follow these safety instructions:

■ Be sure to follow all warnings and instructions marked on the NX110 Series.

■ Use only the type of power source indicated on the NX110 Series label.

■ Use only the power cord that comes with the NX110 Series. Use of another cord may

cause fires or shock. Do not use the cord with any other equipment.

■ Place the NX110 Series near a wall outlet where the plug can be easily unplugged.

■ If you won’t be using the NX110 Series for a long period, unplug the power cord

from the electrical outlet.

■ Always turn off the NX110 Series using the P On button, and wait until the P On

light stops flashing before unplugging the printer or cutting off power to the electrical
outlet.

■ Avoid plugging the NX110 Series into an outlet on the same circuit as a photo copier

or air control system that regularly switches on and off, or on an outlet controlled by a
wall switch or timer.

■ Do not let the power cord become damaged or frayed.

■ If you use an extension cord with the NX110 Series, make sure the total ampere

rating of the devices plugged into the extension cord does not exceed the cord’s
ampere rating. Also, make sure the total ampere rating of all devices plugged into the
wall outlet does not exceed the wall outlet’s ampere rating.

■ Avoid locations that are subject to rapid changes in heat or humidity, shocks or

vibrations, or dust.

■ Leave enough room around the NX110 Series for sufficient ventilation. Do not block

or cover openings in the case or insert objects through the slots.

■ Do not place or store the NX110 Series near a radiator or heating vent, in a dusty or

moist environment, in direct sunlight, or outdoors.

■ Keep the NX110 Series away from potential sources of electromagnetic interference,

such as loudspeakers or the base units of cordless telephones.

■ Do not use aerosol products that contain flammable gases inside or around the

NX110 Series. Doing so may cause fire.

2

■ Place the NX110 Series on a flat, stable surface that extends beyond its base in all

directions. It will not operate properly if it is tilted or at an angle.

■ Do not open the scanner section while the NX110 Series is copying, printing, or

scanning.

■ Do not touch the flat white cable inside the NX110 Series, and be careful not to trap

your fingers when closing the scanner.

■ Do not spill liquid on the NX110 Series or use it with wet hands.

■ Except as specifically explained in your documentation, do not disassemble, modify,

or attempt to service the NX110 Series yourself.

■ Unplug the NX110 Series and refer servicing to qualified service personnel under the

following conditions: if the power cord or plug is damaged; if liquid has entered the
product; if the product has been dropped or the case damaged; if the product does not
operate normally or exhibits a distinct change in performance. Adjust only those
controls that are covered by the operating instructions.

■ When storing or transporting the NX110 Series, do not tilt it, stand it on its side, or

turn it upside down; otherwise ink may leak from the cartridges.

Ink Cartridge Safety

■ Keep ink cartridges out of the reach of children and do not drink the ink.

■ Be careful when you handle used ink cartridges; there may be ink remaining around

the ink supply port. If ink gets on your skin, wash it off with soap and water. If it gets
in your eyes, flush them immediately with water.

■ Do not put your hand inside the NX110 Series or touch any cartridges during

printing.

■ Install a new ink cartridge immediately after removing an expended one. Leaving

cartridges uninstalled can dry out the print head and may prevent the NX110 Series
from printing.

■ If you remove an ink cartridge for later use, protect the ink supply area from dirt and

dust and store it in the same environment as the NX110 Series. Note that there is a
valve in the ink supply port, making covers or plugs unnecessary, but care is needed to
prevent the ink from staining items that the cartridge touches. Do not touch the ink
cartridge ink supply port or surrounding area. Store cartridges with their labels facing
upward.

3

FCC Compliance Statement

For United States Users

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio or
television reception. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off an d on , the user is
encouraged to try to correct the interference by one or more of the following measures:

■ Reorient or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

■ Consult the dealer or an experienced radio/TV technician for help.

WARNING

The connection of a non-shielded equipment interface cable to this equipment will
invalidate the FCC Certification of this device and may cause interference levels which
exceed the limits established by the FCC for this equipment. It is the responsibility of the
user to obtain and use a shielded equipment interface cable with this device. If this
equipment has more than one interface connector, do not leave cables connected to
unused interfaces. Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.

For Canadian Users

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

4

Declaration of Conformity

According to 47CFR, Part 2 and 15 for: Class B Personal Computers and Peripherals;
and/or CPU Boards and Power Supplies used with Class B Personal Computers:

We: Epson America, Inc.
Located at: MS 3-13

3840 Kilroy Airport Way
Long Beach, CA 90806
Telephone: [phone]

Declare under sole responsibility that the product identified herein, complies with 47CFR
Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is
identical to the representative unit tested and found to be compliant with the standards.
Records maintained continue to reflect the equipment being produced can be expected to
be within the variation accepted, due to quantity production and testing on a statistical
basis as required by 47CFR §2.909. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Trade Name: Epson
Type of Product: Multifunction printer
Model: C411B

5