Epson PowerLite Pro Cinema 9350 UB, PowerLite Pro Cinema 9700 UB User Manual

PowerLite® Pro Cinema 9350/9700 UB

Home Theater Projector

User’s Guide

Copyright Notice

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

Trademarks

Epson and C2Fine are registered trademarks, 1080Perfect is a trademark, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation.

PowerLite and PrivateLine are registered trademarks, DigiScan and AccuCinema are trademarks, and Extra Care and Epson Connection are service marks of Epson America, Inc.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are registered trademarks of HDMI Licensing, LLC.

Pixelworks, DNX, and the DNX logo are trademarks of Pixelworks, Inc.

x.v.Color is a trademark of Sony Corporation.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

CPD-28064

Introduction 6

Projector Parts 7

Remote Control 9 Optional Accessories 10 Registration and Warranty 10 Using This Manual 11

Setting Up the Projector 12

Choosing a Location 12 Installing the Projector 16 Connecting the Cables 18

Connecting Video and Computer Equipment 18

Making Other Connections 20 Installing Batteries in the Remote Control 21 Turning the Projector On and Off 21

Turning On the Projector 21

Turning Off the Projector 22 Selecting the Image Source 23 Positioning the Image 24

Making Basic Adjustments 26

Focusing and Zooming 26 Choosing the Aspect Ratio 27 Choosing the Color Mode 28 Advanced Color Adjustments 29

Adjusting the Gamma Setting 30

Adjusting RGBCMY 31 Locking the Projector 32

Contents 3

Making Detailed Adjustments 33

Using the Menu System 33

Changing How the Menus Display 35 Adjusting the Picture Quality 35

Input Brightness Settings 35

Sharpness and Picture Quality Settings 37

Color Settings 40

Adjustments for Computer Images 42 Selecting Memory Settings and Resetting the Projector 43

Selecting Memory Settings 43

Creating Memory Settings 44

Renaming Memory Settings 44

Deleting Saved Memory Settings 45

Resetting the Projector 45 Customizing Projector Features 46

Image Sizing 46

Screen Options 47

Other Setup Options 47

Maintenance 50

Cleaning the Lens 50 Cleaning the Projector Case 51 Cleaning and Replacing the Air Filter 51 Replacing the Lamp 53

Checking the Projector Status 56 Storing the Projector 57 Transporting the Projector 57

4 Contents

Resetting the Lamp Usage Timer 56

Problem Solving 58

What To Do When the Lights Come On or Flash 58 Solving Picture Problems 60 Solving Remote Control Problems 63 Where to Get Help 64

Specifications 65

General 65 Lamp 65 Remote Control 66 Dimensions 66 Electrical 66 Environmental 67 Safety 67 Compatible Video Formats 67 ESC/VP21 Command Codes 69

Notices 71

Important Safety Information 71 FCC Compliance Statement 73 Declaration of Conformity 74 Epson America, Inc. Limited Warranty 74

Index 76

Contents 5

Introduction

The PowerLite® Pro Cinema 9350/9700 UB projector lets you enjoy theater-quality images in the relaxing environment of your own home. Designed especially for home cinema use, it offers these outstanding features:

■ Native 1080p (1920 × 1080) resolution, dynamic contrast ratio up to 200000:1 (50000:1

for the Pro Cinema 9350), and up to 1600 lumens (2000 lumens for the Pro Cinema

9350) of brightness (white light output and color light output) for incredibly rich, sharp

images in any room lighting

■ Auto Iris system that constantly controls the light output based on the gamma and

black/white levels of your projected content, for perfectly adjusted images and deepest

blacks

■ Epson C

uniform colors

■ 1080Perfect

9700 UB)for more film-like images free of noise or artifacts

■ 10-bit color quality (digital only for the Pro Cinema 9350) for unmatched color accuracy,

with over a billion colors available

■ Epson AccuCinema

blocks out excess light for an expanded, purer color range and sophisticated grayscale

tracking

■ HDMI

digital video

Fine® 3LCD technology for reliable picture quality, increased contrast ratio and

™

video processing (using HQV® Reon-VX technology for the Pro Cinema

™

color management delivered by the built-in optical Cinema Filter

(High-Definition Multimedia Interface®) port for superior, uncompressed

■ True 16:9 wide-format projection

■ Flexible setup configurations, including front projection and ceiling mounted, with

vertical and horizontal offset lens shift

■ Seven color modes, including x.v.Color

lighting environments, and a vast array of custom color adjustments

6 Introduction

™

, to quickly optimize viewing for different

Projector Parts

Front

Lamp cover

Control panel (top)

Vertical lens shift dial

Control panel (side)

Zoom ring

Ventilation slots

Horizontal lens shift dial

Back

Component video port

HDMI ports

Focus ring

S-Video port

Lens cover

Infrared receiver

PC port

Infrared receiver

Adjustable foot

Control (RS-232C) port

Lamp cover release

Trigger out port

Kensington lock port

Air intake (filter)

Cable holder

Video port

Main power switch

AC power inlet

Introduction 7

Bottom

Mounting bracket attachment points

Optional cable cover attachment points (brass colored)

Projector Control Panel

Top control panel Side control panel

Power button

Source button Switches the video input source

Warning lights

8 Introduction

Menu button Displays the menus

Enter button Selects menu items or opens the line menu

Menu navigation button

Esc button Exits the current menu item

Remote Control

Power button Turns projector on or off

Default button Restores default settings when menu is displayed

Menu navigation buttons

Memory button Recalls custom picture settings

RGBCMY button Adjusts the hue, saturation, and brightness for each color

Gamma button Adjusts the gamma values of the screen display

Illumination button Lights the remote control buttons for easy viewing

Source buttons Switch between equipment connected to the projector

Esc (escape) button Exits the current menu item

Enter/Line Menu button Selects menu items or opens the line menu

Menu button Displays the projector’s menus

Color Mode button Optimizes viewing for different lighting environments

Aspect button Changes the picture’s aspect ratio

Sharpness button Adjusts image sharpness

Pattern button Displays test patterns to adjust the image

Blank button Temporarily stops projection or hides the menu screen

Introduction 9

Optional Accessories

Epson provides the following optional accessories for the projector:

Product Part number

Replacement lamp V13H010L49

Air filter replacement V13H134A21

Kensington security lock (anti-theft device) ELPSL01

Cable cover V12H003003

Projector mount ELPHB800

Fixed Anamorphic Lens Kit (Pro Cinema 9700 UB only) ELPFALKP

Anamorphic lens kit (Pro Cinema 9700 UB only) ELPALK2

In addition to the accessories listed above, 1-year and 2-year extended service plans are available. You can purchase these plans and other accessories from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

Registration and Warranty

Your projector comes with a basic three-year carry-in warranty. For details, see page 74.

In addition, Epson offers free Extra Care equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States or Canada. See your Extra Care Home Service brochure for details.

To register, simply follow the registration instructions on the CD, or register online at epson.com/webreg. Registering also lets you receive special updates on new accessories, products, and service.

10 Introduction

Home Service. In the unlikely event of an

Using This Manual

This book contains all the information you need to use the projector, in addition to basic setup and maintenance instructions, troubleshooting tips, important safety instructions, specifications, and warranty information.

Please follow these guidelines as you read through the manual:

WARNING: Must be followed carefully to avoid bodily injury.

Caution: Must be observed to avoid damage to your equipment.

Note: Contains important information about your projector.

Tip: Contains helpful projection tips.

Need additional help? Take advantage of Epson’s automated support services 24 hours a day at epson.com/support (U.S.) or epson.ca/support (Canada). Use this site to view FAQs (Frequently Asked Questions) or product information and e-mail your questions to Epson support.

If you need more help, you can use the Epson PrivateLine (800) 637-7661 and enter the PIN on the PrivateLine support card that came with your projector.

Support service. Call

Introduction 11

Setting Up the Projector

Follow the instructions in this section to choose a location for the projector, connect the cables, and display an image.

Choosing a Location

You can install the projector for the viewing setups shown below, as well as rear projection.

Center

Side

Ceiling

12 Setting Up the Projector

Ideally, keep the projector level and place it at a height so its lens is centered between the top and bottom of the screen, as shown below. If this is not possible, use the lens shift dials to reposition the image. As a rule of thumb, you can use lens shift to move the image up or down by nearly its full height, and left or right by about one-half its width (for details, see page 25).

Offset A

Offset B

Offset refers to distance from

Projection distance

bottom of image to center of lens using maximum lens shift.

If you place the projector off to the side, aim it straight ahead (rather than at the center of the screen), then use the horizontal lens shift dial to center the image on the screen.

Horizontal lens shift dial

Vertical lens shift dial

Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the lens shift dials to change the lens position.

Setting Up the Projector 13

The size of the image is determined by the distance from the projector’s lens to the screen. Depending on your display settings and how you use the Zoom ring, the actual size may differ. Use these tables as a guide for projector placement:

16:9 aspect ratio

Projection distance

2.8 to 6.2 feet

0.87 to 1.88 m

3.8 to 8.3 feet

1.17 to 2.52 m

5.8 to 12.5 feet

1.77 to 3.80 m

7.8 to 16.7 feet

2.38 to 5.08 m

9.8 to 20.9 feet

2.98 to 6.36 m

11.8 to 25.1 feet

3.59 to 7.64 m

14.7 to 31.4 feet

4.50 to 9.56 m

19.7 to 41.8 feet

6.01 to 12.76 m

4:3 aspect ratio

Projection distance

3.5 to 7.6 feet

1.07 to 2.31 m

Diagonal image size (width × height) Offset A Offset B

30 in. (26 × 15 in.)

76.2 cm (66 × 37 cm)

40 in. (35 × 20 in.)

101.6 cm (89 × 50 cm)

60 in. (51 × 28 in.)

152.4 cm (130 × 75 cm)

80 in. (71 × 39 in.)

203.2 cm (180 × 100 cm)

100 in. (87 × 47 in.) 254 cm (220 × 120 cm)

120 in. (106 × 59 in.) 305 cm (270 × 150 cm)

150 in. (130 × 75 in.) 381 cm (330 × 190 cm)

200 in. (173 × 98 in.) 508 cm (440 × 250 cm)

Diagonal image size (width × height) Offset A Offset B

30 in. (24 × 18 in.)

76.2 cm (61 × 46 cm)

6.8 in. 17 cm

9.1 in. 23 cm

13.6 in. 35 cm

18.2 in. 46 cm

22.7 in. 58 cm

27.0 in. 69 cm

34.0 in. 86 cm

45.4 in. 115 cm

8.3 in. 21 cm

21.5 in. 55 cm

28.7 in. 73 cm

43.0 in. 109 cm

57.4 in. 146 cm

71.7 in. 182 cm

86.0 in. 219 cm

107.6 in. 273 cm

143.5 in. 364 cm

26.3 in. 67 cm

Horizontal Offset

–11.5 to 11.5 in. –29 to 29 cm

–15.4 to 15.4 in. –39 to 39 cm

–23.1 to 23.1 in. –59 to 59 cm

–30.8 to 30.8 in. –78 to 78 cm

–38.5 to 38.5 in. –98 to 98 cm

–46.1 to 46.1 in. –117 to 117 cm

–57.7 to 57.7 in. –147 to 147 cm

–76.9 to 76.9 in. –195 to 195 cm

Horizontal Offset

–14.1 to 14.1 in. –36 to 36 cm

4.7 to 10.1 feet

1.44 to 3.09 m

7.1 to 15.3 feet

2.18 to 4.66 m

9.6 to 20.4 feet

2.92 to 6.23 m

12 to 25.5 feet

3.66 to 7.79 m

14 Setting Up the Projector

40 in. (32 × 24 in.)

101.6 cm (81 × 61 cm)

60 in. (47 × 35 in.)

152.4 cm (120 × 90 cm)

80 in. (63 × 47 in.)

203.2 cm (160 × 120 cm)

100 in. (79 × 59 in.) 254 cm (200 × 150 cm)

11.1 in. 28 cm

16.7 in. 42 cm

22.2 in. 56 cm

27.8 in. 71 cm

35.1 in. 89 cm

52.7 in. 134 cm

70.2 in. 178 cm

87.8 in. 223 cm

–18.8 to 18.8 in. –48 to 48 cm

–28.2 to 28.2 in. –72 to 72 cm

–37.6 to 37.6 in. –96 to 96 cm

–47.1 to 47.1 in. –120 to 120 cm

4:3 aspect ratio (continued)

Projection distance

14.4 to 30.7 feet

4.40 to 9.36 m

18 to 38.4 feet

5.51 to 11.71 m

24.2 to 51.3 feet

7.36 to 15.62 m

Diagonal image size (width × height) Offset A Offset B

120 in. (94 × 71 in.) 305 cm (240 × 180 cm)

150 in. (118 × 91 in.) 381 cm (300 × 230 cm)

200 in. (161 × 118 in.) 508 cm (410 × 300 cm)

33.0 in. 85 cm

41.7 in. 106 cm

55.6 in. 141 cm

105.0 in. 268 cm

131.7 in. 334 cm

175.6 in. 446 cm

Horizontal Offset

–56.5 to 56.5 in. –143 to 143 cm

–70.6 to 70.6 in. –179 to 179 cm

–94.1 to 94.1 in. –239 to 239 cm

To determine the exact image size when you know the projection distance (or the exact projection distance when you know the desired image size), you can use the Image Size Calculator. This program is available on the Epson website at epson.com/support (U.S.) or epson.ca/support (Canada).

Also keep these considerations in mind:

■ Make sure there is plenty of space for ventilation around and under the projector. Do not

set the projector on top of loose materials that could block the vents underneath.

■ Make sure the projector is within 9.8 feet (3 m) of a grounded electrical outlet or

extension cord.

Setting Up the Projector 15

Installing the Projector

To install the projector, you first need to determine the location, based on the size of your screen (maximum diagonal image size). Use the tables on page 14 as a guide to positioning the projector.

To suspend the projector from a ceiling, you will need the optional projector mount designed for the projector. See page 10 for ordering information. Follow the instructions included with the mount to install the projector.

WARNING: When installing or adjusting the ceiling mount, do not use adhesives to prevent the screws from loosening and do not use any type of oil or lubricant. These may cause the projector casing to crack and the projector may fall, causing serious injury and serious damage to the projector.

If you install the projector on the ceiling, you will need to invert the picture so that it appears right side up. Follow these steps:

1. Press the

2. Open the

3. Select

4. Press the

Menu button on the remote control.

Settings menu, then select Projection.

Front/Ceiling.

Menu button when done.

Note that you can rotate the Epson logo plate 180 degrees when suspending the projector from a ceiling.

If you are planning to use an AV controller with the projector, refer to the table of ESC/VP21 command codes on page 69. In addition, the projector’s

out

port can be used to lower a projection screen or

Trigger

operate a motorized anamorphic lens (see page 48).

16 Setting Up the Projector

The following illustrations show the dimensions of the projector:

Center of lens

5.4 in.

36 mm

0.5 in.

.3 mm

0.2 in.

4.5 mm

1.8 in.

45 mm

17.7 in.

450 mm

11.8 in.

300 mm

5.9 in.

150 mm

2.2 in.

56 mm

5.2 in.

131 mm

3.0 in.

75 mm

2.8 in. 72 mm

5.3 in.

134.7 mm

5.8 in.

148.3 mm

M4× 9 mm

15.3 in.

6.3 in. 160 mm

389.7 m

Setting Up the Projector 17

Connecting the Cables

Connecting Video and Computer Equipment

You can connect the projector to many types of video equipment, such as a Blu-ray

™

/DVD player, digital tuner, cable or satellite box, video game console, camcorder, or

Disc digital camera. You can also connect it to a desktop or laptop PC or Apple system. For details on compatible video formats, see page 67.

You can connect up to six pieces of video equipment at the same time, using any of the commercially available cables shown below:

Port name Video equipment connection Computer connection

Macintosh®

HDMI 1/ HDMI 2

Component Use a component video cable

PC — Use a Mini D-sub, 15-pin monitor cable

S-Video Use an S-video cable: —

Video Use an RCA video cable: —

Use an HDMI cable:

—

(with RCA-style connectors):

Connect the cable to the three component video ports. Match corresponding colors between the cable and the ports.

to connect to a computer RGB (monitor) port:

18 Setting Up the Projector

For best results, connect your video equipment to the HDMI port, if possible. If your equipment doesn’t support HDMI, connect it to one of the following ports (highest quality listed first):

Component (for component video), S-Video, or Video (for composite video).

Connect video equipment to one of these ports

Connect a computer to one of these ports

When you connect a large or heavy cable to the projector, such as an HDMI cable, it is recommended that you fasten it to one of the two cable holders using a commercially available cable tie.

Setting Up the Projector 19

Making Other Connections

Connect the power cable and other cables described below, depending on how you plan to use the projector.

■ Plug the power cable into the projector and a grounded electrical outlet.

■ The Trigger out port outputs a 12-volt DC signal

when the projector is turned on. This lets a central

control system monitor whether the projector is on

or off, and can be used to raise or lower your

projection screen automatically when the projector

is in use. On the Pro Cinema 9700 UB, it can also

be used to operate a motorized anamorphic lens.

Connect a 3.5-mm mini jack to the port, as shown.

Use the

Trigger Out setting to enable the port (see

page 48).

■ To use an AV controller with the projector, connect a 9-pin null modem serial cable to

RS-232C port. Refer to the table of ESC/VP21 command codes on page 69.

the

20 Setting Up the Projector

Installing Batteries in the Remote Control

The remote control uses two AA batteries.

WARNING: Keep batteries away from children. If a battery is swallowed, contact your doctor immediately.

1. Release the tab and lift open the cover.

2. Insert two new AA batteries as shown.

3. Insert the tab on the cover and press it down until it

clicks into place.

Aim the remote control at the screen, or at the front or back of the projector. Make sure you are within 30 feet of the projector.

If you suspect the batteries are weak, press the illumination button. If the buttons do not glow, replace the batteries.

Turning the Projector On and Off

Turning On the Projector

1. Remove the lens cap.

2. Turn on any connected equipment you plan to use.

3. Turn on the main power switch on the back of the projector.

Setting Up the Projector 21

4. Press the Ppower button on the remote control or projector.

Remote control Projector

Note: To prevent children from turning on the projector, you can use the Child Lock feature. See page 32 for details.

If you’ll be using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projector at the high altitude air pressure. See page 49 for details.

The projector takes about 30 seconds to warm up and display an image. If you don’t see a picture, you may need to change the image source as described on page 23.

Turning Off the Projector

1. Turn off any equipment connected to the projector.

2. Press the Ppower button on the remote control or projector. When you see a

confirmation message, press the Ppower button again to turn the projector off.

Caution: Turn off this product when not in use to prolong the life of the projector. Continuous

24-hour-a-day use may reduce the overall life of the product.

3. If you need to move the projector, wait for the Ppower light to stop flashing, then turn

off the projector’s main power switch on the back. You can now unplug the projector.

Caution: Never turn off the main power switch without first turning off the projector and

letting it cool as described above, or you could damage it and reduce lamp life.

22 Setting Up the Projector

Selecting the Image Source

The source buttons on the projector and remote control let you switch between images from different pieces of equipment connected to the projector (such as a Blu-ray Disc/DVD player, cable or satellite box, or video game console).

Press the

Source button on the remote control that corresponds to the port to which your

video source is connected.

If you press the source button on the projector, you see a list of available sources. Press the source button to move through the list and select the desired source.

Note: If an image does not appear, see “Problem Solving” on page 58.

To temporarily turn off the image and darken the screen, press the Blank button on the remote control. Press the Blank button again to return to normal viewing.

Setting Up the Projector 23

Positioning the Image

If the image is not centered on the screen, use the horizontal and vertical lens shift dials to adjust its position.

Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the lens shift dials to change the lens position.

Horizontal lens shift dial

Vertical lens shift dial

Note: You can display a test pattern to help adjust the image position by pressing the Pattern button on the remote control. Select Display Position, then press Enter. Press the Esc button to turn off the test pattern. You can also use the Pattern button to isolate colors when displaying color bars (see page 40).

When you hear a click, the lens position is almost centered. If the lens shift dial becomes difficult to turn, you cannot adjust the position any further.

If one side of the image is taller than the other, make sure the projector is parallel to the screen. If necessary, adjust the front feet so that the projector is horizontal.

24 Setting Up the Projector

Adjustable feet

The image cannot be moved to the maximum distance in both the vertical and horizontal directions. For example, the image cannot be shifted vertically when it has been shifted horizontally by the full amount. When the image has been shifted vertically by the full amount, it can be shifted up to 9 percent of the width of the image. The amount by which you can shift the image is expressed in terms of the image width (W) and height (H), as shown below:

Maximum lens shift boundary

1/2H

Move

downwards

Move

upwards

1/2W

Move to

the left

Move to the right

Setting Up the Projector 25

Making Basic Adjustments

Follow the instructions in this chapter to make basic adjustments to the image shape, size, color, and quality. For further refinements, see “Making Detailed Adjustments” on page 33.

Focusing and Zooming

Use the focus ring to sharpen the image.

Use the zoom ring to reduce or enlarge the image.

Focus ring

Zoom ring

26 Making Basic Adjustments

Choosing the Aspect Ratio

In many cases, video signals are automatically resized to fit on your screen when You may need to change the size of the image (or aspect ratio) for certain image types by pressing the on the remote control.

Select one of these settings:

■ Normal for standard TV broadcasts, computer images,

or images with a 4:3 aspect ratio.

■ Full for images recorded in squeeze mode.

■ Zoom for images recorded in 16:9 (wide-screen) format.

■ Wide for expanding a 4:3 image to 16:9 so it fills the whole screen. This stretches only

the right and left sides of the image; the central part is unchanged.

Auto is selected as the Aspect setting.

Aspect button

4:3 image using Normal setting 16:9 image using Zoom setting

Aspect button

■ Anamorphic Wide when using a commercially available anamorphic lens (Pro Cinema

9700 UB only). This lets you display images recorded at a 2.35:1 aspect ratio using the

projector’s built-in scaler. If you use this setting without an anamorphic lens, the image

fills the screen but not at the correct aspect ratio. If your anamorphic lens has a motorized

transport, you may be able to operate it automatically with the

Trigger out port (see

page 48).

■ Horiz. Squeeze when using a commercially available fixed anamorphic lens (Pro Cinema

9700 UB only). This lets you display images recorded at a 2.35:1 aspect ratio using the

projector’s built-in scaler. If you use this setting without an anamorphic lens, the image

fills the screen but not at the correct aspect ratio.

Making Basic Adjustments 27

Note: When displaying 720p, 1080i, or 1080p signals through the HDMI or Component video port, the aspect ratio is automatically selected and you cannot change it.

If you display a 4:3 image using the Zoom setting, the top and bottom will be cut off. You can use the Zoom Caption Pos. option and other settings to resize and reposition the image. For details, see page 47.

For details on how the projector resizes the picture when you choose an Aspect setting, see page 67.

Choosing the Color Mode

You can change the Color Mode to automatically adjust brightness, contrast, and color, letting you quickly optimize the projected image for various lighting environments. You can also select a different color mode for each input source—which is useful if you view different types of images from different sources. (For example, you might set the HDMI 1 source to

Cinema Day or Living Room if it’s usually used for watching movies in the daytime with

the blinds closed, and the PC source to blinds open.)

Vivid or Dynamic for playing video games with the

Select the image source you want to adjust, then press the

Color Mode button on the remote

control. Choose from these settings:

■ Vivid (Pro Cinema 9700 UB) or Dynamic (Pro

Cinema 9350

) for projecting the brightest picture

available.

■ Cinema Day (Pro Cinema 9700 UB) or Living

Room(

Pro Cinema 9350) for watching television

Color Mode button

programs during the day.

■ THX (Pro Cinema 9700 UB) or Natural (Pro Cinema

9350) for projecting natural, accurate colors in a dimly

lit room.

■ Cinema Night (Pro Cinema 9700 UB) or Cinema (Pro Cinema 9350) for viewing

movies in a dimly lit room.

■ HD (Pro Cinema 9700 UB) for images that are close to those in professional-use

broadcast monitors. Use in a fully darkened room.

■ Silver Screen (Pro Cinema 9700 UB) to emphasize rich colors, like those seen in movies

at the theater. Use in a fully darkened room.

■ x.v.Color for the most natural color reproduction when viewing movies through HDMI.

28 Making Basic Adjustments

The built-in Epson Cinema Filter automatically improves color reproduction in a darkened room; it is not used when you select

9350) or

Cinema Day (Pro Cinema 9700 UB) or Living Room(Pro Cinema 9350).

Vivid (Pro Cinema 9700 UB) or Dynamic (Pro Cinema

Advanced Color Adjustments

To further customize the color and image quality, you can adjust the gamma and individual RGBCMY color tones using the (Not available when

x.v.Color is selected as the Color Mode.)

RGBCMY

Gamma

RGBCMY and Gamma buttons on the remote control.

Note: You can fine-tune these and other color and image quality settings using the projector’s menu system (see page 33). You can also save combinations of picture settings with the Memory feature for easy recall (see page 43). If you don’t like the settings you have selected on a particular menu screen, you can press the Default button to restore the factory settings.

Making Basic Adjustments 29

Adjusting the Gamma Setting

You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the light areas. Gamma presets make minor adjustments to mid-tone values. The larger the gamma preset, the lower the midtone values. Changing these settings affects contrast which can be seen as a blur in bright areas.

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).

1. Press the Gamma button. You see the following displayed on the screen:

2. Do one of the following:

■ Select one of the numeric correction values using the u or d button on the remote

control and press the right. The horizontal axis represents the input signal level, and the vertical axis represents the output signal level. Press the

Enter button. You see the setting reflected in the graph on the

Gamma button to exit.

■ Select Customized. Then continue with the next step.

3. Do one of the following:

■ Select Adjust it from the image. You see a gamma icon on the projected image. Use

the arrow buttons to move the icon to the area of brightness you want to adjust, then press

Enter. The custom gamma graph appears with the channel selected for

adjustment. Press the u or d button to adjust and then press

■

Select Adjust it from the graph. When the gamma graph appears, use the l or r button to select the point on the graph that you want to adjust, and then use the u or d button to adjust the settings. Press

30 Making Basic Adjustments

Enter.

Enter to save your setting and exit.

Adjusting RGBCMY

Use this feature to adjust the hue, saturation, and brightness for each of the red (R), green (G), blue (B), cyan (C), magenta (M), and yellow (Y) color components.

1. Press the

RBGCMY button. You see the following displayed on the screen:

2. Use the u or d button on the remote control to select the color you want to adjust, and

press the

3. Select the

Enter button.

Hue, Saturation, or Brightness for that color, and use the l or r button to

make the adjustment.

4. Press

Note: You can also adjust the offset and gain using the RGB setting in the projector’s menu system (see page 41).

Esc to adjust another color, or press RGBCMY to exit.

Making Basic Adjustments 31

Locking the Projector

The projector includes two lock settings to prevent the image from being accidentally changed once it’s adjusted, and to keep children from turning on the projector without adult supervision.

To access the lock settings, follow these steps:

1. Press the

Menu button on the remote control.

2. Use the menu navigation buttons to open the

Settings

Menu navigation buttons

menu.

3. Choose from these options:

■ Child Lock to disable the Ppower button on the

Menu button

projector’s control panel unless it is pressed for about 3 seconds. (You can use the Ppower button to turn it off, however.) Since you can still use the remote control to turn on the projector, you may want to keep it away from children’s reach.

■ Control Panel Lock to disable all the buttons on the projector’s control panel. A

lock icon appears on the screen whenever you press a button with Control Panel Lock turned on. To operate the projector, you must use the remote control. To cancel Control Panel Lock, press and hold the

Enter button on the projector’s

control panel for at least 7 seconds.

4. Press

Menu to exit the menu system.

If you turned on the Control Panel Lock, the projector buttons are now locked.

If you turned on the Child Lock, turn off the projector and let it cool down. The Child

Lock takes effect after the cool-down period.

Caution: If the Direct Power On setting is turned on (see page 47), using the main power

switch can cause the projector to start even though the Child Lock is in use.

32 Making Basic Adjustments

Making Detailed Adjustments

You can use the projector’s on-screen menus to make detailed adjustments to the image quality—such as the brightness, contrast, sharpness, and color. You can also change the menu display, sleep mode settings, and other projector features.

Using the Menu System

You can access the menu system either from the remote control or the buttons on the projector’s control panel. You can access the full menu or a line menu that lets you change selected settings. You can also change the menu language and control how the menus display (see page 35).

Note: If you press Blank on the remote control while a menu is being displayed, the menu screen disappears. This is useful for checking the effects of your image adjustments. Press Blank again to make the menu reappear.

To display the full menu, press the Menu button on the projector or remote control. You see a display like this one:

Main menu options

Note: You may see different options, depending on your projector model and how your

equipment is connected to it.

Settings available for the highlighted menu

1. Press the u or d button to highlight a main menu option (Image, Signal, Settings,

Memory, Info or Reset), then press the Enter button to select it.

2. Press the u or d button to highlight a setting, then press the

Enter button.

Making Detailed Adjustments 33

3. Press the u, d, l, or r button to change settings as necessary. You may have to press the

Enter button to confirm your choice.

4. When you’re finished, press the

Menu button to exit the menu system.

To display one of the line menus, press the

Esc button to return to the previous menu or press the

Enter button. You see a display like this at the

bottom of the image:

1. Press the u or d button to select the setting you want to adjust:

■ Brightness (see page 36)

■ Contrast (see page 36)

■ Sharpness (see page 37)

■ Color Saturation (see page 40)

■ Tint (see page 40)

■ Absolute Color Temperature (see page 40)

■ Skin Tone (see page 40)

2. Press the l or r button to adjust the setting.

3. Press the

Menu or Esc button to close the line menu when you’re done.

Note: When a line menu is displayed, you can press Default on the remote control to reset the menu to its factory setting.

34 Making Detailed Adjustments

Changing How the Menus Display

Use these options to control how the menus display.

■ Language

Settings > Language

Select from 21 languages to use in the menu system.

■ Menu Position

Settings > Display > Menu Position

Use the arrow buttons to choose a position on the screen for displaying the menu.

■ Menu Color

Settings > Display > Menu Color

Select a color scheme for displaying the menus.

Adjusting the Picture Quality

Before fine-tuning the image using these adjustments, make sure you have already selected the best Color Mode for your picture and viewing environment, as described on page 28. Then use the settings in this section to finish adjusting the picture to your liking.

Most image quality settings are saved independently for each input source (Video, S-Video, HDMI, Component, PC) and color mode. After you finish adjusting the settings for one input source, switch to the other input sources you’ll be using and make any necessary adjustments.

Input Brightness Settings

If the signal from connected equipment is weak and images appear dark, you can adjust the Brightness and Contrast settings. You can adjust brightness and contrast for each image source and color mode.

The Brightness setting controls how much light is produced by the projector, and the Contrast setting adjusts the difference between the bright and dark areas of the projected image. The other settings in this section control how the projector interprets the light and dark areas of the picture.

Making Detailed Adjustments 35

■ Brightness

Image > Brightness

Adjust the brightness so it’s suitable for your viewing conditions. For example, if you’re

projecting in a brightly lit room or onto an especially large screen, you may need to

increase the brightness. Decrease the brightness for dark rooms or small screens; this also

reduces power consumption and fan noise, and helps to prolong the life of the lamp.

■ Contrast

Image > Contrast

This setting adjusts the difference between bright and dark areas.

■ Auto Iris

Image > Auto Iris

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).

When this setting is on, the light output is automatically adjusted according to the

brightness of the image. Select either

Normal or High Speed to indicate how quickly

you would like the projector to respond to changes in the brightness of the image. The

setting is stored separately for each image source and color mode.

■ Setup Level

Signal > Advanced > Setup Level

Note: This setting can be used only when an NTSC signal is being input through the Video or

S-Video port, or when a video signal is being input through the Component video ports.

This setting adjusts the threshold at which dark areas of the image are rendered black

(0 IRE). For compatibility with most DVD and video equipment sold in the United

States, leave this setting at 0%. Check your video equipment’s specifications to be sure of

the correct setting.

■ EPSON Super White

Signal > Advanced > EPSON Super White

Note: This setting can be used only when a composite video, S-Video, or component video

signal is being input and the Color Mode is set to THX (Pro Cinema 9700 UB), Natural (Pro

Cinema 9350), Cinema Night (Pro Cinema 9700 UB), Cinema (Pro Cinema 9350), HD (Pro

Cinema 9700 UB), Theatre Black 1 (Pro Cinema 9350), Silver Screen (Pro Cinema 9700 UB), or

Theatre Black 2 (Pro Cinema 9350) (see page 28).

If bright parts of the image are washed out or overexposed (when the input signal

contains values over 100 IRE), turn this setting on to compensate.

36 Making Detailed Adjustments

■ HDMI Video Range

Signal > Advanced > HDMI Video Range

Note: This setting can be used only when HDMI1 or HDMI2 is selected as the image source

(see page 23). This setting cannot be used when the Color Mode is set to x.v.Color (see

page 28).

If your video equipment has an HDMI port and you’ve connected it to the projector

using an HDMI cable, set the level of the projector to match that of the video equipment.

■ Power Consumption

Image > Power Consumption

This setting controls the light output from the projector. On Normal, the projector

produces a brighter image and the lamp uses more power. To save power and extend the

life of the lamp, select

ECO.

Sharpness and Picture Quality Settings

If the image looks fuzzy, or if it contains noise or flickering, you can use these settings to correct it.

■ Sharpness

Image > Sharpness

Use this function to make lines and edges appear more distinct in the image. This setting

is stored separately for each image source and color mode setting. You can select

Standard to adjust the sharpness of the entire image, or select Advanced to access the

following submenu:

Note: The Advanced setting cannot be used with a signal input through the PC port.

Choose Thin-Line Enhancement to sharpen details such as hair and clothing. Choose

Thick-Line Enhancement to sharpen large contours and backgrounds. Choose Vert.

Line Enhancement

Enhancement

You can also access this setting by pressing the

to increase vertical image sharpness. Choose Horiz. Line

to increase horizontal image sharpness.

Sharpness button on the remote control.

Making Detailed Adjustments 37

■ Progressive

Signal > Progressive

Converts interlaced to progressive signals. The projector uses 3D DigiScan™ HD

Circuitry Processing for video-sourced images. For film-sourced images, you can select

from 2-2, 2-3, or 4-4 pulldown detection, depending on your model.

Leave the setting on

output. Select

Cinema 9350, set to

the Pro Cinema 9700 UB, set to

Note: This setting can be used only when viewing composite video or S-video signals, or 480i

or 576i, or 1080i signals input through the Component, HDMI 1, or HDMI 2 ports (see page 67).

For the Pro Cinema 9700 UB, this setting cannot be changed while the 4-4 Pull-down setting

is turned on (see page 39).

Film/Auto for viewing movies on a player that produces interlaced

Video for watching videos captured with a video camera. With the Pro

Off when viewing images with a large amount of movement. With

Film if flickering appears with the Auto setting.

■ Motion Detection (Pro Cinema 9350 only)

Signal > Motion Detection

This setting specifies how signals are converted to progressive signals. Select a lower

setting for slow-moving or still images (

M).

(

Note: This setting can be used only when viewing composite video or S-Video signals, or 480i

or 576i, or 1080i signals input through the Component, HDMI 1, or HDMI 2 ports (see page 67).

■ Noise Reduction

Signal > Advanced > Noise Reduction

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or

with a signal input through the PC port.

S) or select a higher number for video images

This setting reduces flickering of analog images. You can select from 3 levels of noise

reduction.

■ Mosquito NR (Pro Cinema 9700 UB only)

Signal > Advanced > Mosquito NR

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or

with a signal input through the PC port.

This setting reduces grainy noise that can appear around the edges of MPEG images. You

can select from 3 levels.

38 Making Detailed Adjustments

■ Block NR (Pro Cinema 9700 UB only)

Signal > Advanced > Block NR

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or

with a signal input through the PC port.

This setting reduces block noise that can appear when projecting MPEG images that have

been compressed at a low bit rate.

■ 2-2 Pull-down (Pro Cinema 9350 only)

Signal > 2-2 Pull-down

Note: This setting can be used only when viewing a 1080p/24Hz signal input through the

Component, HDMI1, or HDMI2 ports (see page 67). This setting cannot be used when the

Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port.

This setting allows you to select whether images are projected with 2-2 pulldown

detection or 2-3 pulldown detection. Select

■ 4-4 Pull-down (Pro Cinema 9700 UB only)

Signal > 4-4 Pull-down

Note: This setting can be used only when viewing NTSC, M-PAL, or PAL60 signals input

through the Video or S-Video ports, or 480i, 1080i/60Hz, or 1080p/24Hz signals input through

the Component, HDMI1, or HDMI2 ports (see page 67). This setting cannot be used when the

Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port.

On for 2-2 pulldown detection.

This setting allows you to select whether images are projected with 4-4 pulldown

detection or 2-3 pulldown detection. Select

■ Frame Interpolation (Pro Cinema 9700 UB only)

Signal > Frame Interpolation

On for 4-4 pulldown detection.

This setting compares the current and previous frames, then creates a frame between

them to reduce fuzziness and produce clearer moving images. You can select from 3 levels

of frame interpolation.

Note: This setting cannot be changed while the 4-4 Pull-down setting is turned on.

Making Detailed Adjustments 39

Color Settings

If the image colors don’t look correct, you can adjust them using these settings. Use the first three settings described below to make the most visible changes. If you only need to make slight adjustments, you can fine-tune the picture with the remaining settings. Most color settings are stored separately for each image source and color mode.

Note: If you’re using a commercially available color calibration DVD, you can display a color-bar test pattern and then filter colors in the image by pressing the Pattern button. Select one of the Color Isolation options for the color you want to filter (R/G/B). This lets you adjust color settings without holding a filter over your eyes while making adjustments. Press the Esc button when you’re done.

■ Color Saturation

Image > Color Saturation

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or

with a signal input through the PC port.

Adjusts the color intensity of the image.

■ Tint

Image > Tint

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or

with a signal input through the PC port.

Shifts the color balance between magenta and green.

■ Abs. Color Temp.

Image > Abs. Color Temp.

Note: This setting cannot be used when the Color Mode is set to THX or x.v.Color (see

page 28).

Shifts the color balance between red and blue, making the image appear warmer or

cooler.

■ Skin Tone

Image > Skin Tone

Note: This setting cannot be used when the Color Mode is set to THX or x.v.Color (see

page 28).

Makes fine adjustments to the tint and controls the amount of magenta or green in the

image. Also useful for correcting black-and-white images, if they look tinted.

40 Making Detailed Adjustments

■ RGB

Image > Advanced > RGB

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).

Use the RGB settings to fine-tune the color of the image. You can adjust the offset and

gain for each signal color (red, green, and blue). Use

Gain for the lightest shades.

■ RGBCMY

Image > Advanced > RGBCMY

Offset to adjust darker shades and

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).

Use the RGBCMY settings to adjust the hue, saturation, and brightness of the six color

components (red, green, blue, cyan, magenta, yellow). After adjusting each color, press

Esc to move to another menu option. You can also access this setting by pressing the

RGBCMY button on the remote control. See page 31 for more information.

■ Gamma

Image > Advanced > Gamma

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).

You can select from five gamma settings (2.0 to 2.4) or customize your own setting from

your image or a displayed graph. Lower values will increase the contrast of dark areas, but

tend to blur the bright areas. Higher values will darken the light areas.

You can also access this setting by pressing the

Gamma button on the remote control.

See page 30 for more information.

Making Detailed Adjustments 41

■ Color Gamut (Pro Cinema 9700 UB only)

Image > Advanced > Color Gamut

Note: The Color Gamut setting can only be used when the Color Mode is set to THX (see

page 28).

You can select from three different color gamut settings according to the source material

and locale. Select

using NTSC),

■ Contrast Enhancement (Pro Cinema 9700 UB only)

Image > Advanced > Contrast Enhancement

Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).

SMPTE-C for standard definition (USA, Canada, and other regions

EBU (PAL) for Europe, or HDTV (all regions).

This setting automatically enhances contrast by calculating based on the current contrast.

You can select from 3 levels of contrast enhancement.

■ Super-resolution (Pro Cinema 9700 UB only)

Image > Advanced > Super-resolution

This setting sharpens blurred images, enhancing the apparent detail of the image. You can

select from 3 levels of enhancement. Note that intentionally blurred parts of the image,

such as out-of-focus backgrounds, may become sharper.

Adjustments for Computer Images

In addition to the settings described previously, you can adjust the Tracking and Sync settings for analog RGB computer images. Normally, these settings are adjusted automatically by the projector. If you notice that the image is blurry or contains dark vertical bands, you may need to adjust the settings yourself.

■ Auto Setup

Signal > Auto Setup

Leave this setting on so that the projector automatically adjusts the tracking, sync, and

position of the image.

42 Making Detailed Adjustments

■ Tracking

Signal > Tracking

Adjust the tracking to eliminate vertical bands. It is easiest to

adjust the tracking when the image contains a lot of fine detail

(such as black text on a white background).

■ Sync.

Signal > Sync.

Adjust the synchronization to eliminate blurriness. For best results,

make sure the tracking is properly adjusted first.

Selecting Memory Settings and Resetting the Projector

Your projector comes with 8 memory locations that are reserved for color mode calibration by installers. In addition, there are 2 memory locations where you can save other customized settings to obtain the best picture quality for each of your video inputs.

Selecting Memory Settings

You can easily recall the memory settings by using the memory button on the remote control.

1. Press the

2. Select

3. Use the arrow buttons to select the desired setting, then

press the

After a moment, the image appears on the screen using

the retrieved settings. Certain settings may not be

applied, depending on the input signal.

Memory button on the remote control.

Load Memory.

Enter button.

Memory button

Making Detailed Adjustments 43

Creating Memory Settings

Memory settings can be used to store most of the picture quality settings on page 37 and color settings on page 40. Before saving them to memory, adjust the settings to the desired levels.

1. Press the

2. Select

3. Select the memory name you want to use, then press the

Memory button on the remote control.

Save Memory.

Enter button to save your

settings.

Note: Saved settings are indicated by a green highlight next to the memory name. If you select a name that is already in use, the existing settings will be erased and new ones saved in their place.

Renaming Memory Settings

You can rename memory settings so that they are easier for you to recognize.

1. Press the

2. Select

3. Select the memory name you want to change, then press the

selection screen is displayed.

4. Do one of the following:

■ To select a name from the displayed preset names, select the desired name and press

■ To create your own name, select Customized and use the keyboard screen to enter

Memory button on the remote control.

Rename Memory.

Enter button. The name

Enter button.

the

the name. Use the arrow buttons to select a character, then press the When you have selected all of the characters in your name, select

Enter button.

Finish and press the

Enter button.

44 Making Detailed Adjustments

Deleting Saved Memory Settings

You can clear all your memory settings at once.

1. Press the

2. Open the

3. Select

Note: You can delete memory settings one at a time with the Erase Memory setting under the Memory menu.

Menu button on the remote control.

Reset menu, then select Reset Memory.

Yes, then press the Enter button to delete the memory settings.

Resetting the Projector

If the image quality isn’t what you expect, one or more settings may be adjusted improperly. If necessary, you can restore the projector to its factory-default (original) settings.

To restore the settings in a specific menu (such as the Image or Settings menu), open that menu, select Image menu settings:

Open the Image menu . . .

Reset, and confirm as needed. The example below shows how to reset the

and select Reset

You can also reset the lamp usage timer or restore all the projector settings to their original values. Follow these steps:

1. Press the

2. Open the

Menu button on the remote control.

Reset menu.

Making Detailed Adjustments 45

3. Do one of the following:

■ Select Reset Lamp Hours to clear the lamp usage timer and reset it to zero.

You should reset the lamp timer only when you install a new projector lamp. See page 56 for more information.

■ Select Reset Memory to clear all memory settings.

■ Select Reset All to return all projector settings to their original defaults (except

Component, Save Memory, Language, and Lamp Hours).

Customizing Projector Features

Use the settings in this section to adjust the image size and position, suppress on-screen text, and select basic setup options.

Image Sizing

Before adjusting any of these settings, make sure you have already selected an appropriate aspect ratio for the type of picture you’re viewing (see page 27).

■ Overscan

Signal > Advanced > Overscan

For component video formats, this setting lets you see the edges of the image that are not

normally visible in the picture (see page 67). If you see interference when you set

Overscan to 100%, try adjusting the Position as described below.

■ Position

Signal > Position

Note: This setting cannot be used with a signal input through the HDMI 1 or HMDI 2 port.

Use the arrow buttons to fine-tune the position of the image on the screen.

■ Aspect

Signal > Aspect

This setting lets you change the aspect ratio of your image, and works the same as

pressing the

Aspect button on the remote control. See page 27 for more information.

46 Making Detailed Adjustments

■ Zoom Caption Pos.

Signal > Zoom Caption Pos.

Lets you adjust the shape and position of the image so that subtitles are visible (available

only if the aspect ratio has been set to

of the image, and

Zoom Caption Pos. to move the image up or down. Adjust overscan

Zoom). Use Zoom Size to adjust the proportions

before changing the zoom position.

Screen Options

■ Messages

Settings > Display > Messages

Turn this setting off if you want to prevent on-screen messages from appearing (such as

the no-signal message, or the identifying text that appears when you switch between

image sources or color modes).

■ Startup Screen

Settings > Display > Startup Screen

Turn this setting off if you want to prevent the startup screen from appearing while the

projector is warming up.

■ Display Background

Settings > Display > Display Background

Changes the screen that’s used when the projector is not receiving a signal or when you

press the

Blank button to temporarily stop projection.

Other Setup Options

■ Projection

Settings > Projection

You can select different options for projecting the image: Front, Front/Ceiling, Rear,

Rear/Ceiling.

■ Direct Power On

Settings > Direct Power On

Sets projection to start when the main power switch is turned on, without pressing the

P power button on the remote control or the projector.

Note: When direct power on is enabled, power surges that occur after a power outage can

cause the projector to turn on.

Making Detailed Adjustments 47

■ Video Signal

Settings > Input Signal > Video Signal

Leave this setting on Auto so the projector can automatically interpret the format, such as

NTSC or PAL (for standard TV formats).

■ Component

Settings > Input Signal > Component

Change this setting to match the type of equipment connected to the Component port.

For component video, select

or select

■ Trigger Out

YCbCr or YPbPr to manually select your video equipment’s signal.

Settings > Trigger Out

Auto to let the projector automatically interpret the signal;

Turn on this setting to have the Trigger out port output a 12-volt signal to lower your

projection screen when the projector is running. For the Pro Cinema 9700 UB, select

Power to signal when your projector is turned on, or Anamorphic Wide to engage a

motorized anamorphic lens (commercially available) when that aspect ratio is selected.

Note: If you change this setting, the new setting will take effect the next time you turn the

projector on.

■ Illumination

Settings > Illumination

Turn off this setting to deactivate the lights on the projector’s P power and source

buttons. Use this setting if you find the lights distracting in a darkened room.

■ Sleep Mode

Settings > Sleep Mode

Turn off this setting if you don’t want the projector to enter sleep mode. (Sleep mode

shuts the projector off automatically when there is no video signal.)

Select

5min., 10min., or 30min. as the length of time before shutoff; decreasing the time

conserves power and extends the life of the lamp.

To turn the projector back on, press the Ppower button on the remote control or the

projector.

■ Child Lock

Settings > Child Lock

Lets you lock the Ppower button on the projector’s control panel to make it more

difficult for a child to turn on the projector. See page 32 for more information.

48 Making Detailed Adjustments

■ Control Panel Lock

Settings > Control Panel Lock

Lets you disable all the buttons on the projector’s control panel to prevent the image from

being accidentally changed once it is adjusted. See page 32 for more information.

■ High Altitude Mode

Settings > High Altitude Mode

Adjusts the speed of the fan so it can properly cool the projector at higher altitudes. Turn

this setting on if you are using the projector at an altitude of 4921 feet (1500 meters) or

higher.

Making Detailed Adjustments 49

Maintenance

Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. You also may need to clean the air filter to prevent overheating.

WARNING: Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages in the projector can injure you severely. Do not try to service this product yourself, except as specifically explained in this User’s Guide.

The only parts you should replace are the air filter and the lamp. If another part needs replacing, contact your dealer or a qualified servicer.

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.

■ Use a blower brush that is designed for camera

equipment to remove dust from the lens.

■ To remove dirt or smears, use a lens cloth or

tissue. If necessary, moisten the cloth with lens

cleaner and gently wipe the lens surface.

Caution: Never rub the lens with abrasive materials. Use only lens cleaning fluids that are designed for cleaning optics.

50 Maintenance

Cleaning the Projector Case

Before you clean the case, turn off the projector and unplug the power cord.

■ To remove dirt or dust, wipe the case

with a soft, dry, lint-free cloth.

■ To remove stubborn dirt or stains,

moisten a soft cloth with water and a

neutral detergent. Then wipe the case

and dry it with a dry cloth.

Caution: Never use wax, alcohol, benzene, thinner, or other chemical detergents. These can damage the case.

Cleaning and Replacing the Air Filter

Your projector includes an air filter to ensure the best performance. If dust collects on the air filter, clean it as described below. Dust clogs prevent proper ventilation and cause overheating and damage to the projector.

1. Press the Ppower button and wait for the Ppower light to stop flashing. The projector

cools down.

2. Turn off the projector using the power switch on the back.

3. Unplug the power cord and disconnect any cables.

4. Turn the projector over (unless it’s ceiling mounted).

5. Push down on the tabs on the filter cover to remove it.

6. Remove the air filter as shown.

Maintenance 51

7. Gently tap both sides of the air filter against a hard surface

four or five times to remove loose dust from the air filter.

Note: Do not tap the filter too hard. This can cause it to bend

or break.

8. Use a small vacuum cleaner that is designed for computers

and other office equipment to remove any remaining dust

from the surface of the filter. If you don’t have one, gently

clean the filter using a very soft brush (such as a clean

artist’s paintbrush).

If the dirt is difficult to remove or the filter is broken,

replace it. You can purchase air filter part number V13H134A21 from an authorized

Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766).

To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian

sales).

9. Insert the air filter as shown with the groove on the right.

10. Reattach the air filter cover by inserting the tabs as shown and pressing the cover against

the projector until it clicks into place.

52 Maintenance

Replacing the Lamp

The projection lamp lasts for up to 4000 hours. You can use the Info menu to check how long it’s been in use (see page 56). It’s time to replace the lamp when:

■ The projected image gets darker or starts to deteriorate.

■ The projector’s lamp light flashes red at half-second

intervals.

■ The message Replace the lamp appears on the screen

when you start projecting.

Note: Lamp life results will vary depending on mode selected, environmental conditions, and usage.

Turn off this product when not in use to prolong the life of the projector.

You can purchase lamp part number V13H010L49 from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

Be sure to read the “Important Safety Information” on page 71 before replacing the lamp.

WARNING: Let the lamp cool fully (about 1 hour) before replacing it. In the unlikely event that the lamp has broken, small glass fragments may be present and should be removed carefully to avoid injury.

Lamp light

Caution: Never touch the glass portion of the lamp with your bare hands; the invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp.

Follow these steps to replace the lamp:

1. If the projector is on, press the P power button and wait for the light to stop flashing.

2. Turn off the power switch on the back of the projector.

3. Unplug the power cord and any cables.

4. Wait about an hour to make sure the lamp is no longer hot.

Maintenance 53

5. Insert the screwdriver that came with the lamp (or a similar tool) into the slot on the back

of the projector to release the lamp cover. Then lift up the cover to remove it.

6. Loosen the two screws securing the lamp (they don’t come all the way out).

7. Grasp the lamp as shown and pull it straight out.

WARNING: The lamp(s) in this product contain mercury. Please consult your state and

local regulations regarding disposal or recycling. Do not put in the trash.

54 Maintenance

8. Gently insert the new lamp and tighten its screws.

Caution: Don’t touch the glass portion of the lamp assembly. Touching the glass could result

in premature lamp failure.

9. Replace the lamp cover. (The projector won’t work if the lamp cover is open or loose.)

10. Reset the lamp usage timer, as described on page 56.

Maintenance 55

Resetting the Lamp Usage Timer

After replacing the lamp, plug the projector back in, turn on the power switch on the back, and press the Ppower button. Then follow these steps to reset the lamp usage timer:

1. Press the

2. Use the menu navigation buttons to open the

Hours

3. When you see a confirmation prompt, highlight

4. When you’re finished, press the

Menu button on the projector or remote control.

Reset menu, then select Reset Lamp

Yes and press the Enter button.

Menu button to exit.

The lamp usage timer shows 0H until you’ve used the lamp for at least 10 hours.

Checking the Projector Status

You can use the Info menu to view information about the current display settings and how long the projection lamp has been in use. To access the Info menu:

1. Press the

2. Use the menu navigation buttons to open the

appears:

■ Lamp Hours ■ Refresh Rate

■ Source ■ Sync Info

Menu button on the projector or remote control.

Info menu. The following information

■ Input Signal ■ Video Signal

■ Resolution ■ Deep Color (color depth)

■ Scan Mode ■ Status (error information)

Note: The information displayed depends on the currently selected image source. The Lamp Hours shows 0H until you’ve used the lamp for at least 10 hours.

The resolution indicates the total number of scan lines in the source signal. The number of visible scan lines depends on the signal format standard and selected display settings (see page 67).

56 Maintenance

Storing the Projector

If you need to store the projector for an extended time, do the following:

■ Make sure the temperature of the storage area is within 14 to 140 °F (–10 to 60 °C).

■ Attach the lens cover and retract the feet.

■ Remove the batteries from the remote control.

■ Pack the projector in its original packaging or equivalent.

Transporting the Projector

Note: Epson shall not be liable for any damages incurred during transportation.

The projector contains many glass and precision parts. When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original packaging, use equivalent materials. Do not used materials that can become lodged in the projector vents. Be sure the carrier is capable of transporting fragile equipment and is aware that the projector is fragile.

Before transporting the projector, make sure you center the lens from left to right by turning the horizontal lens shift dial until it clicks. Then lower the lens all the way down by turning the vertical lens shift dial until it stops.

Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the lens shift dials to change the lens position. If the lens shift dial becomes hard to turn, you cannot adjust the position any further.

Maintenance 57

Problem Solving

This section explains how to interpret the projector’s status lights, solve problems with the picture and remote control, and contact technical support.

What To Do When the Lights Come On or Flash

The lights on top of the projector indicate the projector’s status and let you know when a problem occurs.

If the projector isn’t working correctly, first press the P power button, let the projector cool down, turn off the power switch on the back, and unplug the power cord. Then plug the power cord back in and turn on the projector. If this doesn’t solve the problem, check the status lights on top of the projector.

Status lights

Warning lights

Lights indicating normal operation

Light state Cause and solution

All lights are off The projector is turned off. If necessary, connect the power cord

Power light is on The projector is in standby mode. Turn off the power switch in

Power light and

source light are on

58 Problem Solving

Power light flashes and

source light

is on

Power light flashes; no other lights are on

and turn on the power switch on the back of the projector.

back to turn off the projector, or press the it on.

The projector is warming up. Wait for the picture to appear.

Projection is in progress.

The projector is cooling down. Wait until the light stops flashing and remains on. Then turn off the power switch in back to turn off the projector, or press the

Ppower button to turn it back on.

Ppower button to turn

Lights indicating a problem

Light state Cause and solution

All lights are off The projector is not receiving power. Make sure the power switch

on the back of the projector is turned on and the power cord is connected securely at both ends.

The temperature light flashes orange and the

power light is

flashing

High-speed cooling is in progress. If the temperature rises further, projection will stop automatically. Make sure there is plenty of space around the projector for ventilation. Clean or replace the air filter if necessary (see page 51).

If you are using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can cool the projector properly (see page 49).

The temperature light is red

The lamp light flashes orange and the power light is flashing

The lamp light flashes red

Both warning lights are flashing red

The temperature light flashes red

Both warning lights are red

The projector is too hot, which turns off the lamp automatically. Let the projector cool for five minutes, then turn it back on. Make sure there is plenty of space around the projector for ventilation. Also, clean or replace the filter if necessary (see page 51).

If you are using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can cool the projector properly (see page 49).

The lamp needs to be replaced soon (see page 53). Make sure you have a spare lamp handy. If you just replaced the lamp, you may need to reset the lamp usage timer (see page 56).

The lamp needs to be replaced. If you just replaced the lamp, make sure the lamp and its cover are securely installed (see page 53).

There is an internal problem. back of the projector, and unplug it from the electrical outlet. Then contact Epson for assistance (see page 64).

There is a fan or sensor problem. Turn off the power switch on the back of the projector, and unplug it from the electrical outlet. Then contact Epson for assistance (see page 64).

There is an internal problem. back of the projector, and unplug it from the electrical outlet. Then contact Epson for assistance (see page 64).

Turn off the power switch on the

Note: If the power and source lights don’t come on, they may have been turned off using the Illumination setting (see page 48).

Problem Solving 59

Solving Picture Problems

You cannot turn on the projector.

■ Make sure the power cord is connected and the power switch in back of the projector is

turned on. Then wait a moment for the Ppower light to come on before pressing the

Ppower button.

■ If you’ve set the Control Panel Lock, the control panel buttons are disabled; you must

use the remote control to turn on the projector (see page 32).

■ If you’ve set the Child Lock, you have to press the Ppower button for 3 seconds to turn

on the projector, or use the remote control (see page 32).

No picture appears on the screen or you see the

■ Press one of the Source buttons on the remote control, or press the source button

No Signal message displayed.

on the projector, to select the correct input source. Allow a few seconds for the projector

to sync up after pressing the button.

■ Press the Blank button on the remote control to make sure the picture hasn’t been turned

off temporarily.

■ Check that the P power light is on, the P power light is not flashing, and the lens cover is

off.

■ The projector may be in standby (or sleep) mode. If the Ppower light is on and the

source light is off, press the Ppower button to turn the projector back on.

■ Make sure your video equipment is turned on.

■ Make sure your cable(s) are connected correctly (see page 18).

Only part of the picture is displayed, or the picture is distorted.

■ Press the Aspect button to select a different aspect ratio (see page 27).

■ If the Aspect is set to Zoom, you may need to use the Zoom Caption Pos. option to see

the top or bottom section of the screen so that subtitles are visible (see page 47).

■ Check the Overscan to make sure it’s adjusted correctly (see page 46).

■ Use the Position setting to reposition the image on the screen (see page 46).

■ If you’ve connected a computer and you see only half the image, make sure the

computer’s Dual Display setting is turned off. If part of the image is cut off, reset the

projector settings (see page 45).

60 Problem Solving

You’re using a computer and no picture appears on the screen.

If you’re using a Windows

■ Press the function key that lets you display on an external monitor. It’s often labeled with

an icon such as , but it may also be labeled

the

Fn key while pressing it. Check your laptop’s manual or online help.

laptop:

CRT/LCD. You may have to hold down

On most systems, the key lets you toggle between the LCD screen and the

projector, or display on both at the same time. Allow a few seconds for the projector to

sync up after pressing it.

■ If the function key doesn’t let you display simultaneously on both screens, you might

need to use the Display utility in the Windows Control Panel to make sure that both the

LCD screen and external monitor port are enabled. From the Windows Control Panel,

open the

then click

computer; you may need to click a

Display utility. In the Display Properties dialog box, click the Settings tab,

Advanced. The method for adjusting the setting varies from computer to

Monitor tab, then make sure the external Monitor

port is set as your primary display or enabled. See your computer manual or online help

for details.

If you’re using Mac OS X:

1. Open the

2. Select

3. On the

System Preferences utility and select Displays.

Detect Displays.

Arrange or Arrangement screen, check the Mirror Displays checkbox. (See

your computer manual for details.)

Click here

The picture is upside-down or reversed.

Change the

Projection setting in the Settings menu (see page 47).

Problem Solving 61

The picture isn’t rectangular.

■ If the image looks like or , the projector has been placed off to one side of the

screen and angled toward it. Face the projector straight ahead (instead of at the center of

the screen), then use the horizontal lens shift dial to center the image (see page 24).

■ If the image looks like or , make sure the projector is not tilted up or down.

The picture contains static or noise.

■ Make sure the Input Signal is set correctly for your connected video equipment (see

page 48).

■ If you’re viewing still images and you notice flickering or horizontal lines, turn on the

Progressive setting (see page 38).

■ Make sure your cables are securely connected at both ends.

■ If you’re using an extension cable, you may pick up interference if the cable is not

adequately shielded. You may need to use a signal amplifier for longer cables.

■ If you’re displaying the same image on your computer and projector screen, try turning

off your laptop’s LCD display (see page 61).

The picture is blurry.

■ Make sure the Input Signal is set correctly for your video equipment (see page 48).

■ There may be dirt on the lens. Clean the lens as described on page 50.

■ Adjust the focus (see page 26).

■ Make sure the lens is not fogged by condensation. If you’ve just moved the projector from

a cold environment, wait a couple of minutes before using it.

■ Adjust the Sharpness setting (see page 37).

■ If you’re projecting from a computer, you may need to adjust the Tracking and Sync

settings (see page 43).

The colors on the screen don’t look right.

■ Make sure the Input Signal is set correctly for your connected video equipment (see

page 48).

■ Press the Color Mode button on the remote control to select a different color mode (see

page 28).

■ Check the brightness and contrast settings (see page 35).

62 Problem Solving

■ Fine-tune the colors with the settings listed on page 40.

■ If the picture looks dark, you may need to replace the lamp. Check the lamp usage timer

to see how long the lamp has been in use (see page 56). Replace the lamp if it’s close to

the end of its service life (see page 53).

Solving Remote Control Problems

The projector doesn’t respond to remote control commands.

■ Make sure you’re within about 30 feet of the projector, and the remote control is aimed at

the projector’s front or back sensor within the ranges shown below.

Approx.60

■ You may need to replace the remote control batteries (see page 21). Press the

Approx.60

illumination button and check if the buttons glow. If they don’t, replace the batteries.

■ Dim the room lights and turn off any fluorescent lights. Make sure the projector is not in

direct sunlight.

■ Turn off nearby equipment that emits infrared energy, such as a radiant room heater.

■ Make sure there are no objects between the remote control and the IR receiver.

Problem Solving 63

Where to Get Help

Internet Support

Epson provides technical assistance 24 hours a day at epson.com/support (U.S.) or

epson.ca/support (Canada). Here you can access troubleshooting information, download

product documentation, and receive technical advice through e-mail.

Speak to a Support Representative

To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card that came with your projector. This is the fastest way of speaking to a live representative, and it’s free. This service is available 6 Time, Monday through Friday, for the duration of your warranty period.

You may also speak with a projector support specialist by dialing one of these numbers:

■ U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday

■ Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday

Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Before you call, please have the following information ready:

■ Product name (PowerLite Pro Cinema 9350 or PowerLite Pro Cinema 9700 UB)

AM to 6 PM, Pacific

■ Product serial number (located on the bottom of the projector)

■ Computer configuration, if you’re connected to a computer

■ Description of the problem

Purchase Supplies and Accessories

You can purchase screens, carrying cases, or other accessories from an authorized Epson reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

64 Problem Solving

Specifications

General

Type of display Poly-silicon TFT active matrix

Size of LCD panels 0.74 inch (18 mm) wide

Lens F=2.0 to 3.17

Resolution (native format) 1920 × 1080 pixels, 1080p

Brightness Pro Cinema 9350:

Normal mode: White light output 2000 lumens (ISO 21118 standard) Color light output 2000 lumens

Pro Cinema 9700 UB:

Normal mode: White light output 1600 lumens (ISO 21118 standard) Color light output 1600 lumens

Dynamic contrast ratio 50000:1 (Pro Cinema 9350)

200000:1 (Pro Cinema 9700 UB)

Image size 30 to 300 inches

Projection distance 2.85 to 62.83 feet (0.87 to 19.15 m)

Zoom ratio 1 to 2.1

Aspect ratio 16:9

Fan noise level 22 dB

Lamp

Note: Lamp life will vary depending on mode selected, environmental conditions, and usage. Brightness decreases over time.

Turn off this product when not in use to prolong the life of the projector.

Type UHE (Ultra High Efficiency), E-TORL

Power consumption 200 W

Lamp life 4000 hours

Part number V13H010L49

Specifications 65

Remote Control

Range Approximately 30 feet (9 m)

Batteries AA × 2

Dimensions

Height 5.4 inches (136 mm), not including adjustable feet

Width 17.7 inches (450 mm)

Depth 14.2 inches (360 mm); not including lens protrusion

Weight 16.1 lb (7.3 kg) (Pro Cinema 9350)

16.5 lb (7.5 kg) (Pro Cinema 9700 UB)

Electrical

Rated frequency 50/60 Hz AC

Power supply 100 to 120 VAC:

3.1 A (Pro Cinema 9350)

3.3 A (Pro Cinema 9700 UB)

200 to 240 VAC:

1.3 A (Pro Cinema 9350)

1.5 A (Pro Cinema 9700 UB)

Power consumption 100 to 120 VAC:

Operating: 272 W (Pro Cinema 9350) 297 W (Pro Cinema 9700 UB) Standby: 0.2 W

220 to 240 VAC:

Operating: 261 W (Pro Cinema 9350) 284 W (Pro Cinema 9700 UB) Standby:

0.3 W (Pro Cinema 9350)

0.4 W (Pro Cinema 9700 UB)

66 Specifications

Environmental

Temperature Operating: 41 to 95 °F (5 to 35 °C)

Storage: 14 to 140 °F (–10 to 60 °C)

Humidity Operating: 20 to 80% RH, non-condensing

Storage: 10 to 90% RH, non-condensing

Operating altitude Up to 7500 feet (2286 meters);

over 4921 feet (1500 meters), enable High Altitude mode in the Settings menu (see page 49)

Safety

United States FCC Part 15B Class B (DoC)

UL60950-1

Canada ICES-003 Class B

CSA C22.2 No. 60950-1

Pixelworks DNX

™

ICs are used in this projector.

Compatible Video Formats

The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts to the incoming signal. It can receive these formats as composite video, S-video, or component video— which it accepts through the Video, S-Video, and Component ports, respectively.

The projector also supports digital video (SDTV, HDTV) and various monitor display formats. Digital video is accepted by the HDMI and Component video ports. The PC port accepts analog RGB computer monitor signals.

If necessary, you can select a different Aspect setting to optimize the image. The resolution at which the image displays for a given setting depends on the currently active picture source, as listed in the following tables.

Composite video or S-Video

Format

NTSC 60 720 × 480

PAL 50 720 × 576

SECAM 50/60 720 × 576

Refresh rate (Hz)

Resolution

Specifications 67

Component video

Format/ Signal

SDTV

480i 576i 480p 576p

HDTV

720p 1080i 1080p

Refresh rate (Hz)

60 50 60 50

50/60 50/60 50/60

Resolution

720 × 480 720 × 576 720 × 480 720 × 576

1280 × 720 1920 × 1080 1920 × 1080

Analog RGB (computer display)

Signal Refresh rate (Hz) Resolution

VGA 60/72/75/85 640 × 480

56/60/72/

SVGA

XGA 60/70/75/85 1024 × 768

SXGA

WXGA

MAC13” MAC16” MAC19” MAC21”

75/85 800 × 600

70/75/85 60/75/85 60/75/85

60 60 60/75/85

67 75 59/75 75

1152 × 864 1280 × 960 1280 × 1024

1280 × 768 1360 × 768 1280 × 800

640 × 480 832 × 624 1024 × 768 1152 × 870

HDMI

Signal Refresh rate (Hz) Resolution

VGA 60 640 × 480

SDTV 480i 576i 480p 576p

HDTV 720p 1080i 1080p

68 Specifications

60 50 60 50

50/60 50/60 24/30/50/60

720 × 480 720 × 576 720 × 480 720 × 576

1280 × 720 1920 × 1080 1920 × 1080

ESC/VP21 Command Codes

You can use an AV controller with a 9-pin null modem serial cable to control the projector. You can download the complete ESC/VP 21 Communication Manual for home theater projectors from the Epson website at epson.com/support (U.S.) or epson.ca/support (Canada). Following are some of the available codes:

Item Command

Power ON/OFF ON PWR ON

OFF PWR OFF

A/V Mute ON/OFF ON MUTE ON

OFF MUTE OFF

A/V Mute selection Black MSEL 00

Blue MSEL 01

Source change

Color Mode Cinema Night CMODE 05

Terminal Signal name

Component Component video SOURCE 10

YCbCr SOURCE 14

YPbPr SOURCE 15

Auto SOURCE 1F

PC HDB15 SOURCE 20

RGB SOURCE 21

HDMI 1 HDMI 1 SOURCE 30

Video Video/S-Video SOURCE 40

Video (RCA) SOURCE 41

S-Video SOURCE 42

HDMI 2 HDMI 2 SOURCE A0

Vivid CMODE 06

THX or Natural CMODE 07

HD CMODE 09

Silver Screen CMODE 0A

x.v.Color CMODE 0B

Cinema Day CMODE 0C

Specifications 69

Item Command

Aspect ratio

Normal ASPECT 00

Full ASPECT 40

Zoom ASPECT 50

Wide ASPECT 70

Anamorphic Wide (Pro Cinema 9700 UB) ASPECT 80

Horiz. Squeeze (Pro Cinema 9700 UB) ASPECT 90

70 Specifications

Notices

Important Safety Information

Follow these safety instructions when setting up and using the projector:

■ Never look into the projector lens when the lamp is turned on; the bright light can damage your

eyes. Never let children look into the lens when it is on.

■ Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical

voltages inside the projector can severely injure you.

■ Except as specifically explained in this User’s Guide, do not attempt to service this product

yourself. Refer all servicing to qualified service personnel.

■ The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small

children to avoid any risk of suffocation.

■ Don’t place the projector on an unstable cart, stand, or table. Also, don’t use the projector near

water or sources of heat.

■ Use the type of power source indicated on the projector. If you’re not sure of the power available,

consult your dealer or power company.

■ Place the projector near a wall outlet where the plug can be easily unplugged.

■ Don’t insert the plug into an outlet with dust present, and insert the plug firmly into the outlet.

Failure to do so could result in sparks or fire.

■ Don’t overload wall outlets, extension cords, or integral convenience receptacles. This can cause

fire or electric shock.

■ Don’t block the slots and openings in the projector case. They provide ventilation and prevent the

projector from overheating. Don’t operate the projector on a sofa, rug, or other soft surface, or in a

closed-in cabinet unless proper ventilation is provided.

■ Never push objects through the cabinet slots or spill liquid into the projector.

■ Unplug the projector from the wall outlet and refer servicing to qualified service personnel under

the following conditions: when the power cord or plug is damaged or frayed; if liquid has been

spilled into the projector, or if it has been exposed to rain or water; if it doesn’t operate normally

when you follow the operating instructions, or if it exhibits a distinct change in performance,

indicating a need for service; if it has been dropped or the housing has been damaged.

■ Don’t place the projector where the cord can be walked on. This may result in fraying or damage

to the plug.

■ Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not

use liquid or aerosol cleaners.

Notices 71

■ The lamp(s) in this product contain mercury. Please consult your state and local regulations

regarding disposal or recycling. Do not put in the trash.

■ Allow the lamp to cool for one hour before replacing it.

■ Unplug the projector during lightning storms or when not in use for extended periods.

■ Don’t place the projector or remote control on top of heat-producing equipment.

■ If you use the projector in a country other than where you purchased it, use the correct power cord

for that country.

■ Don’t stand on the projector or place heavy objects on it.

■ Don’t use the projector outside of the required temperature range of 41 to 95 °F

(5 to 35 °C). Doing so may cause an unstable display and could lead to projector damage.

■ Don’t store the projector outside of the required temperature range of 14 to 140 °F

(–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage

to the case.

WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. (This notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and following.)

72 Notices

FCC Compliance Statement

For United States Users

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

■ Reorient or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

■ Consult the dealer or an experienced radio/TV technician for help.

WARNING

The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

For Canadian Users

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materiel brouilleur du Canada.

Notices 73

Declaration of Conformity

According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers:

We: Epson America, Inc. Located at: 3840 Kilroy Airport Way

MS 3-13 Long Beach, CA 90806-2469 Telephone: (562) 290-5254

Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Trade Name: Epson Type of Product: Projector Model: H373F/H420A Marketing Name: PowerLite Pro Cinema 9350/PowerLite Pro Cinema 9700 UB

Epson America, Inc. Limited Warranty

Three-Year Projector Limited Warranty and 90-Day Lamp Limited Warranty

What Is Covered: Epson America, Inc. (‘Epson’) warrants to the original retail purchaser of the Epson projector product enclosed with this limited warranty statement that the product, if purchased new and operated in the United States, Canada, or Puerto Rico will be free from defects in workmanship and materials for a period of three (3) years from the date of original purchase. This limited warranty applies only to the projector and not to the projector lamp, which carries a limited warranty period of ninety (90) days from the date of original purchase. For warranty service, you must provide proof of the date of original purchase.

What Epson Will Do To Correct Problems: If your product requires service during the limited warranty period, please call Epson at the number on the bottom of this statement and be prepared to provide the model, serial number, and date of original purchase. Epson will, at its option, repair or replace the defective unit, without charge for parts or labor. When warranty service involves the exchange of the product or of a part, the item replaced becomes Epson property. The exchanged product or part may be new or refurbished to the Epson standard of quality, and at Epson’s option, the replacement may be another model of like kind and quality. Epson’s liability for replacement of the covered product will not exceed the original retail selling price of the covered product. Exchange or replacement products or

74 Notices

parts assume the remaining warranty period of the product covered by this limited warranty. If Epson replaces the lamp as part of the warranty service, the replacement lamp carries the limited 90-day warranty stated above.

What This Warranty Does Not Cover: This warranty covers only normal use in the United States, Canada or Puerto Rico. Twenty-four hours per day or other excessive continual use is not considered normal use. This warranty does not cover consumables such as filters. This warranty is not transferable. Epson is not responsible for warranty service should the Epson label or logo or the rating label or serial number be removed. Epson is not responsible for warranty service should the product fail to be properly maintained or fail to function properly as a result of misuse, abuse, improper installation, neglect, improper shipping, damage caused by disasters such as fire, flood, and lightning, improper electrical current, software problems, interaction with non-Epson products, or service other than by Epson or an Epson Authorized Servicer. Postage, insurance, or shipping costs incurred in presenting your Epson product for carry-in warranty service are your responsibility. Epson will pay for all freight charges if you choose to send your unit to Epson for repair. If a claimed defect cannot be identified or reproduced in service, you will be held responsible for costs incurred.

THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID. IN THE EVENT THE REMEDIES ABOVE FAIL, EPSON'S ENTIRE LIABILITY SHALL BE LIMITED TO A REFUND OF THE PRICE PAID FOR THE EPSON PRODUCT COVERED BY THIS LIMITED WARRANTY. EXCEPT AS PROVIDED IN THIS WRITTEN WARRANTY, NEITHER EPSON AMERICA, INC. NOR ITS AFFILIATES SHALL BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THE EPSON PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY.

In Canada, warranties include both warranties and conditions.

Some jurisdictions do not allow limitations on how long an implied warranty lasts and some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from jurisdiction to jurisdiction.

To find the Epson Authorized Reseller nearest you, please visit our website at: www.epson.com.

To find the Epson Customer Care Center nearest you, please visit www.epson.com/support.

To contact the Epson Connection

, please call (800) 637-7661 + PIN or (562) 276-4394 in the U.S. and (905) 709-3839 in Canada or write to Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012.

Notices 75

Index

Numerics

2-2 Pull-down, 39 4-4 Pull-down, 39

Abs. Color Temp. setting, 40 Accessories, 10, 64 Air filter

cleaning and replacing, 51 to 52

ordering, 10 Anamorphic lens, 20, 27 Anamorphic Wide setting, 27 Anti-theft device, 7, 10 Aspect button, 9, 27, 28, 60 Aspect ratio, selecting, 27 to 28, 46 Auto Iris setting, 36 Auto Setup, 42

Batteries, remote control, 21 Blank button, 23 Block NR, 39 Blurry picture, 62 Brightness

setting, 36

specification, 65 Buttons

projector, 8

remote control, 9

Cleaning

air filter, 51 to 52 lens, 50

projector case, 51 Codes, AV controller, 69 Color

adjusting, 29 to 31, 40 to 41

isolating, 40

problems, 62 Color Gamut setting, 42 Color Mode, 9, 28, 62 Color Saturation setting, 40 Color temperature setting, 40 Component setting, 48 Component video connection, 18 Computer

adjusting image, 42

displaying image, 61 Contrast

button, 9

ratio, 65

setting, 36 Contrast Enhancement, 42 Control Panel Lock, 49 Control panel lock, 32 Control panel, projector, 8

Declaration of Conformity, 74 Direct Power On, 47 Display Background setting, 47 Documentation, 11

Cables, connecting, 18 to 20 Child Lock, 32, 48

76 Index

Electrical requirements, 66 Epson

accessories, 10, 64 Home Service, 10 PrivateLine Support, 11, 64 technical support, 11, 64

warranty, 10, 74 to 75 EPSON Super White setting, 36 ESC/VP21 command codes, 69

FCC Compliance Statement, 73 Filter, see Air filter Flickering, 38, 62 Focus ring, 26 Frame Interpolation, 39

Gain, color, 41 Gamma, 29 to 30, 41 Gamma button, 9

HDMI, 18, 19, 36 to 37 Help, 64 High Altitude Mode, 49 Home Service, 10

Illumination of buttons

projector, 48, 58 to 59

remote control, 21 Illumination setting, 48, 59

Image

adjusting, 29 to 31, 35 to 43 changing aspect ratio, 27 to 28 inverting, 16, 47 positioning, 24 to 25, 46 resizing, 27 to 28, 46 selecting source, 23

size, 14 to 15 Image menu, 45 Image problems, 60 to 63 Image Size Calculator, 15 Info menu, 56 Installing projector, 16 Interference, signal, 62

Kensington anti-theft device, 7, 10

Lamp

checking usage timer, 56

life, 65

ordering, 10, 53

replacing, 53 to 55

resetting usage timer, 56

safety instructions, 71 to 72

specifications, 65 Language setting, 35 Lens shift dials, 13, 24 Lens, cleaning, 50 Lights, projector, 48, 58 to 59 Line menu, 9 Lock

Child Lock, 32, 48

control panel lock, 32

Kensington, 7, 10

projector buttons, 32

Index 77

Memory button, 9, 43 Memory settings

creating, 44 renaming, 44

using, 43 Menu button, 9, 33 Menus

available settings, 35 to 49

customizing display, 35

line menu, 9

using, 33 to 35 Message setting, 47 Mosquito NR, 38 Motion Detection, 38 Mounting projector, 16 Moving projector, 57

No image, 60 to 61 Noise Reduction, 38

Offset, color, 41 Overscan, 46

Pattern button, 9, 24, 40 Picture problems, 60 to 63 Pixelworks, 67 Positioning image, 24 to 25, 46 Positioning projector, 12 to 15 Power Consumption setting, 37 PrivateLine Support, 11, 64 Problems

indicator lights, 58 to 59

picture, 60 to 63

remote control, 63 Progressive mode setting, 38

Projection distance, 14 to 15, 65 Projector

checking status, 56 cleaning, 51 control panel, 8 dimensions, 17, 66 installing, 16 lights, 48, 58 to 59 locking buttons, 32 menus, 35 to 49 parts, 7 to 8 positioning, 12 to 15 resetting menu options, 45 security lock, 7, 10 storing, 57 transporting, 57 turning on and off, 21 to 22, 60

Registration, 10 Remote control

batteries, 21 buttons, 9 lighting up buttons, 21

problems, 63 Replacing lamp, 53 to 55 Resetting

lamp usage timer, 46, 56

projector settings, 45 Resolution

compatible formats, 67 to 68

projector, 56, 65 RGB settings, 41 RGBCMY setting, 29 to 31 RGBCMY settings, 41

Safety approvals, 67 Safety instructions, 71 to 72 Setup level, 36 Sharpness, 37 Signal menu, 36

78 Index

Skin Tone

setting, 40 Sleep mode, 48 Source buttons, 8, 9 Source, selecting image, 23 Specifications

compatible video formats, 67 to 68

dimensions, 66

electrical, 66

environmental, 67

general, 65

lamp, 65

remote control, 66 Startup screen, selecting, 47 Static, 62 Storing projector, 57 Super-resolution, 42 Support, 11, 64 S-Video connection, 18 Sync (Synchronization) setting, 42

Technical support, 11, 64 Test pattern, 24, 40 THX setting, 28 Tint, 40 Tracking, 42 Transporting projector, 57 Trigger out port, 20, 27 Trigger out setting, 48 Turning on and off projector, 21 to 22, 60

Warranty, 10, 74 to 75 Where to Get Help, 64 Wide setting, 27

x.v.Color setting, 28

Zoom Caption Pos. setting, 28, 47 Zoom ring, 26 Zoom setting, 27

Video Signal setting, 48 Video, compatible formats, 67 to 68 VP21 codes, 69

Index 79

Epson PowerLite Pro Cinema 9350 UB, PowerLite Pro Cinema 9700 UB User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Copyright Notice

Trademarks

Contents

Introduction

Projector Parts

Remote Control

Optional Accessories

Registration and Warranty

Using This Manual

Setting Up the Projector

Choosing a Location

Installing the Projector

Connecting the Cables

Connecting Video and Computer Equipment

Making Other Connections

Installing Batteries in the Remote Control

Turning the Projector On and Off

Turning On the Projector

Turning Off the Projector

Selecting the Image Source

Positioning the Image

Making Basic Adjustments

Focusing and Zooming

Choosing the Aspect Ratio

Choosing the Color Mode

Advanced Color Adjustments

Adjusting the Gamma Setting

Adjusting RGBCMY

Locking the Projector

Making Detailed Adjustments

Using the Menu System

Changing How the Menus Display

Adjusting the Picture Quality

Input Brightness Settings

Sharpness and Picture Quality Settings

Color Settings

Adjustments for Computer Images

Selecting Memory Settings and Resetting the Projector

Selecting Memory Settings

Creating Memory Settings

Renaming Memory Settings

Deleting Saved Memory Settings

Resetting the Projector

Customizing Projector Features

Image Sizing

Screen Options

Other Setup Options

Maintenance

Cleaning the Lens

Cleaning the Projector Case

Cleaning and Replacing the Air Filter

Replacing the Lamp

Resetting the Lamp Usage Timer

Checking the Projector Status

Storing the Projector

Transporting the Projector

Problem Solving

What To Do When the Lights Come On or Flash

Solving Picture Problems

Solving Remote Control Problems

Where to Get Help

Specifications

General

Lamp

Remote Control

Dimensions

Electrical

Environmental

Safety

Compatible Video Formats

ESC/VP21 Command Codes

Notices

Important Safety Information

FCC Compliance Statement

Declaration of Conformity

Epson America, Inc. Limited Warranty