Epson PowerLite 715c Product Support Bulletin

EPSON

Date: 8/30/2007 Originator: DS
PSB #: PSB.2007.08.001 Authorization:
Reference: N/A Total Pages: 1
Product(s): Epson Projectors with an HD-15 VGA Analog/Component Input
Subject: Elmo HV-110XG Document Camera and Projector Compatibility

This bulletin was created to inform you of an operational issue with the Elmo HV-110XG
Document Camera when initially connected to an Epson projector.

Problem:

When attempting to use the Elmo HV-110XG Document Camera connected via the VGA HD15
connection to display content from its document bed. When connected to the projector, the
projector displays only the Blue Screen - No Signal message and will blink off and on or
display just the Blue Screen - No Signal message. When a computer is connected to the Elmo
HV-110XG Document Camera and switched to Pass-Through mode, the computer image is
displayed correctly by the projector. When switching back to the document table source of the
Elmo HV-110XG Document Camera, the problem returns. The Elmo HV-110XG Document
Camera puts out a Progressive Scan 20fps signal to the projector's VGA Analog port. This
signal is detected at 15 kHz Vertical and 291.8 kHz Horizontal frequencies which are beyond
projector sync specifications.

RODUCT SUPPORT BULLETIN

P

Solution:

With the Elmo HV-110XG Document Camera powered on and connected to the projector via
the VGA computer cable, access the Computer1/Computer2 setting in the projector menu
system and select the Component setting within the appropriate connection. This will allow
the Elmo HV-110XG Document Camera and projector to sync and the projector to display the
image of the document camera bed and its contents. However, the image will have a pink
cast. To eliminate the pink cast, change the projector setting from Component to RGB then to
Auto and exit from the menu. The projected image will now look normal. This will now allow
the Elmo HV-110XG Document Camera to sync and display the image properly to any other
connected Epson projector without having to change the projector settings.

Page 1 of 1

EPSON

RODUCT SUPPORT BULLETIN

P

Date:
PSB #:
Reference:
Product(s):
Subject:

This bulletin was created to inform you of Compact Flash Support for the PowerLite 505c and
PowerLite 715c projectors.

Cards tested:

The following Compact Flash cards and adapters have been tested and added to the Extended Card
Support Listing.

Compact Card Make/Size Epson CF Adapter SimpleTechnology Adapter

Epson 8MB Flash Card Supported Supported
Lexar 32MB Flash Card Supported Supported
Lexar 48MB Flash Card Supported Supported
Lexar 64MB Flash Card Supported Supported
SimpleTechnology 128MB Card Supported Supported
Memorex 256MB Card Partially supported
SanDisk 512MB Card Partially supported

04/02/2002
PSB.2002.04.007
TI01-12e
PowerLite 505c / 715c
Compact Flash Card and Adapter Support

*1, *5
*1, *6

Originator:

Authorization:

Total Pages:

Partially supported
Partially supported

JAM
3

*1, *5
*1, *6

Extended Card Support Listing:

Manufacturer Name of product Vol. Model number Adapter

Micro drive IBM 340MB microdrive 340MB DMDM-10340 IBM PC Card Adapter for IBM

Memory stick

Smartmedia

SONY MEMORY STICK 4MB 4MB MSA-4A

SONY MEMORY STICK 32MB 32MB MSA-32A

SONY MEMORY STICK 64MB 64MB MSA-64A

Hagiwara
Syscom

FUJIFILM SmartMedia 16MB 16MB MG-16S

MELCO BUFFALO 32MB 32MB SMFDV032

FUJIFILM SmartMedia-ID 64MB 64MB MG-64SW

SmartMedia 2MB 2MB SMFV002

manufacturer

SONY MSAC-PC1 Supported *4
SONY MSAC-PC2 Supported
I-O DATA PCMS-ADP Supported
SONY MSAC-PC1 Supported *4
SONY MSAC-PC2 Supported
I-O DATA PCMS-ADP Supported
SONY MSAC-PC1 Supported *4
SONY MSAC-PC2 Supported
I-O DATA PCMS-ADP Supported
Hagiwara Syscom HPC-SV03A Partially supported *1
MELCO RFD-A2 Partially supported *1
I-O DATA PCFDCⅣ-ADP Supported
OLYMPUS MA-2 Supported
FUJIFILM PC-AD3 Supported
Hagiwara Syscom HPC-SV03A Partially supported *1
MELCO RFD-A2 Partially supported *1
I-O DATA PCFDCⅣ-ADP Supported
OLYMPUS MA-2 Supported
FUJIFILM PC-AD3 Supported
Hagiwara Syscom HPC-SV03A Partially supported *1
MELCO RFD-A2 Partially supported *1
I-O DATA PCFDCⅣ-ADP Supported
OLYMPUS MA-2 Supported
FUJIFILM PC-AD3 Supported
Hagiwara Syscom HPC-SV03A Partially supported *1&*2 With ID
MELCO RFD-A2 Partially supported *1&*2 With ID
I-O DATA PCFDCⅣ-ADP Partially supported *2 With ID
OLYMPUS MA-2 Partially supported *2 With ID
FUJIFILM PC-AD3 Partial ly supported *2 With ID

Adapter model name Supporting status Problem and

microdrives

countermeasure

Remarks

Supported

Card type Manufacturer Name of product Vol. Model number Adapter

manufacturer

Compact
flash

EPSON CompactFlash Card 8MB 8MB 60045390 EPSON 60045400 Supported
EPSON CompactFlash Card 8MB 8MB ECFA-08A EPSON 60045400 Supported
EPSON CompactFlash Card 8MB 8MB ECFB-08 EPSON 60045400 Supported
EPSON CompactFlash Card 16MB 16MB 60046790 EPSON 60045400 Supported
EPSON CompactFlash Card 16MB 16MB ECFA-16 EPSON 60045400 Supported
EPSON CompactFlash Card 16MB 16MB ECFD-16 EPSON 60045400 Partially supported EasyMP

LEXAR MEDIA Compact Flash Card 32MB 32MB EPSON/Simple

Technology

LEXAR MEDIA Compact Flash Card 48MB 48MB EPSON/Simple

Technology
LEXAR MEDIA Compact Flash Card 64MB 64MB
MITSUBISHI CompactFlash 15MB 15MB MF0015M-

EPSON 60045400 Supported

03BA01

MEMOREX Compact Fl ash Card 256MB 256MB

EPSON/Simple

Technology
SANDISK Compact Flash Card 512MB 512MB EPSON/Simple

Technology
SIMPLE
TECHNOLOGY

Compact Flash Card 128MB 128MB EPSON/Simple

Technology

EPSON 60045400 SupportedI-O DATA P CCF-40M 40MB PCCF-40M

Adapter model name Supporting status Problem and

countermeasure

Supported
Supported
Supported

Partially Supported *1 & *5
Partially Supported *1 & *6

Supported

Remarks

Ver1.10
or upper
version

I-O DATA CompactFlash Platform

Supported

Adapter

MELCO RCF-C 48MB RCF-C

EPSON 60045400 Supported

MELCO RCF-A Supported
EPSON Flash P acker 40MB 40MB FP40 - - Supported Flash ATA

TDK Flash Memory 96MB 96MB SFD096H - - Support ed

Modem Not supported
LAN Not supported
IDE interface Not supported *3 For

external
CD-ROM

*1 When Capture/Sc enari o i s created with overwrite protection mode, files can become inaccessible (both read or write) and a
warning message, "there is no file" is displayed. When the card is removed and re-inserted, the card recovers .
*2 When capture is made with overwrite protection mode, in some cases the message "under overwrite protection"
or "capture failed" can appear.
*3 It can take five to t en seconds until the card s l ot access LED is
activated.
*4 This adapter (MSAC-PCA) needs m ore time for formatting compared to other card adapt ers.
(Ordinarily 1 sec. or less is normal but it takes about 2 sec. for this one.)

*5 More than one format may be required bef ore t otal card size is displ ayed.
*6 More than one format may be required to use card.