Epson PowerLite 7000 Product Sheet
EPSON PowerLite 7000 Multimedia Projector
remote control
operational status
remote control
lever
Projector Specifications
General
Type of display Liquid crystal panel, Thin Film
Transistor
Size of liquid
crystal panels 1.32 inches (33.6 mm)
Resolution 1024 (horizontal) x 768 (vertical) pixels
Image size 21 to 300 inches (0.6 to 7 meters)
Projection
distance 3.3 to 33 feet (1 to 10 meters)
Projection
method Front, rear, and upside-down projection
Remote control
range 33 feet (10 meters)
Internal speaker
system
2 x 2
Optical aspect
ratio 4 x 3 (horizontal x vertical)
Zoom ratio
1:1.3
Projector lamp
Type
Power
Part number
Lumens
Metal Halide, DC
150w
ELPLP03
400
Mechanical
Height 6.3 inches (159 mm) including foot adjuster
Width 9.7 inches (245 mm)
W
(TFT)
stereo
Depth
Weight
15.0 inches (380 mm) with lens
14.55 lb (6.6 kg)
Electrical
Voltage
Rated frequency
Power supply
Power
consumption
100 to 120
50/60
Hz
100 to 120
projector)
200 to 240
260
W
VAC
and 200 to 240
VAC,
2.9 A, 50/60 Hz (on the
VAC,
1.8
A,
50160
VAC
Hz
Environmental
Temperature Operation: 4 1 to 104” F (5 to 40”
non-condensing
Storage: 14 to 140” F (-10 to 60”
non-condensing
Humidity
Operation: 20 to 80%
RH,
non-condensing
Storage: 10 to 90%
RH,
non-condensing
C),
C),
Supported monitor displays
The projector displays images at a resolution of 1024 x 768
pixels. To display a higher resolution image, the projector
compresses it to 1024 x 768. The following table lists the
display formats supported by the projector:
Computer type
IBM PC and
IBM PC compatible
Apple Macintosh Standard 8-and 640 x 480
NEC
Note: The
frequencies
to be displayed correctly.
Note: This projector is compatible with DDC-capable graphic
sub-systems and boards only.
*
The projector uses a patent-pending technology to resize the
image to 1024 x 768.
Formats Resolutions
VGA, SVGA, VESA, EGA, 640 x 480
XGA 640 x 200
640 x 400
800 x 600
1024 x
768
1152x864*
1280 x 1024*
24.bit
color monitor 832 x 624
PC
1024 x
768
1017x768
1152x864*
640 x 480
1120x750*
ofsome computers may not allow the image
6/13/97
PowerLite 7000 Multimedia Projector - 1
EPSON PowerLite 7000 Multimedia Projector
Projector Placement Guidelines
The distance between the projector and the screen determines
the actual image size. Use the general guidelines in the table
below to determine the proper distance.
Horizontal distance from
Image size
(diagonal)
300 inches
200 inches
100 inches
80 inches
60 inches
40 inches
30 inches
21 inches
the projector screen
Minimum
393.7inches
263.8 inches (6.7
129.9 inches (3.3
106.3 inches (2.7
78.7 inches (2
51 .2 inches (1 .3
39.4 inches (1
m)
m)
m)
m)
m)
m)
39.4 inches (1
Maximum
(10
m)
342.5 inches (8.7
169.3 inches (4.3
137.8 inches (3.5
102.4 inches (2.6
66.9 inches (1 .7
51 .2 inches (1 .3
m)
m)
m)
m)
m)
m)
m)
Projector Status Indicators
The power and lamp indicators at the top of the projector let
you know the projector’s operating status, as described below.
Status indicator
Power indicator
Steady orange: Sleep mode. (The projector is plugged in,
Steady green: Power and lamp are on.
Flashing orange: The projector is hot.
Steady red
Flashing red There is an internal projector problem.
Projection lamp indicator
Function
but not projecting.)
The projector is too hot and has turned off.
Monitor and Computer In 1/12
Connector Pin Assignments
The Monitor and Computer In 1/2 connectors are female
video RGB, 15-pin micro-D-style connectors. The pin
assignments are:
Monitor connector
Input pin signals
1
2
3
4
5
6
7
8
9
10 GND
11
12 Reserved
13 Horizontal sync
14 Vertical sync
15 Vertical sync
Red out / red video
Green out / green video
Blue out / blue video
Reserved
GND
GND
GND
GND
Reserved
Reserved
Computer In 1/2
connector signals
Red video
Green video
Blue video
Monitor (ID bit 2)
GND
Red video GND
Green video GND
Blue video GND
+5
v
Synchronous GND
Monitor (ID bit 0)
SDA
Horizontal sync
Vertical sync
Reserved
Information Reference List
Engineering Change Notices
None.
Technical Information Bulletins
None.
Steady green Projection lamp is on.
Flashing green The projector is warming up.
Orange and red Projection lamp needs replacing.
flashing alternately
Flashing orange Projector lamp is cooling down.
Steady red Projector lamp has burned out. Replace it
to project images.
Flashing red Problem with projection lamp or lamp
power supply.
Note: If you press the Power button to turn the projector back on
while the power indicator is flashing orange, there may be a delay
before the projected image appears.
2 - PowerLite 7000 Multimedia Projector
6/13/97
Product Support Bulletins
None.
Related Documentation
CPD
4987
SM-ELP7000
PL-ELP7000
EPSON
Projector User’s Guide
EPSON
Projector Service Manual
EPSON
Projector Parts Price List
PowerLite-7000
PowerLite-7000
PowerLite-7000
Multimedia
Multimedia
Multimedia
Loading...