Epson PowerLite 1815p Product Support Bulletin

EPSON PRODUCT SUPPORT BULLETIN

Date:
PSB #:
Reference:
Product(s):
Subject:

This bulletin was created to inform you of an issue and solution when the projector cannot be
detected with NS Connection using Quick Wireless Connection.

Description of Issue:

When IP addresses of both wired and wireless LAN ports of the projector are on the same
network segment, the projector cannot be detected or connect using Quick Wireless
Connection mode of NS Connection.

Reason:

Solutions:

• Set the IP addresses of both wired and wireless LAN ports on different network
segments.

• In the case that the IP address is not assigned to the projector’s Wired LAN port by
DHCP server, set the DHCP to OFF and set up the IP address for other network
segment other than 169.254.xxx.xxx/255.255.255.) f or the projector’s wired LAN port.

05/10/2010
PSB.2010.06.002
TI08-45e Rev. A
PowerLite 835p and PowerLite 1815p
Connection Issue Using Quick Wireless Connection Mode

Originator:

Authorization:

Total Pages:

esc
2

Page 1 of 1

PSB.2010.06.002

EPSON PRODUCT SUPPORT BULLETIN

Date:
TIB #:
Reference:
Product(s):

Subject:

This bulletin was created to inform you of the release of the new version 2.51 of the
EMP NS Connection software.

Description of Change:

Improvements have been made to the EMP NS Connection utility.

Reason:

The improvements to NS Connection V2.51 are as follows
Improvements（V2.50 ( V2.51

Improvements  Addition of 10 new languages: Arabic, Ukrainian, Romanian,

06/10/2009
PSB.2009.06.002
TI 09-08j Rev. A
PowerLite 735c / 737c / 745c /755c/ 765c / 835p /1705/1715/1815/1825/7850p
/ 8300 with EasyMP.net option, Pro G5150/G5350 / 1725 / 1735W / 85 / 825 /
826W
Release of EMP NS Connection for Windows & Mac Upgrade from v2.50 to
v2.51

Indonesian, Croat, Slovak, Bulgarian, Malay, Vietnamese and Hebrew.

 Addition of troubleshooting function (Windows Only)

When pressing the troubleshooting button, the
corresponding troubleshooting and error number is displayed
in the error message window.

• When experiencing problems with NS Connect, please report to

Epson the error number along with the failure information.

Originator:

Authorization:

Total Pages:

DS
8

Page 1 of 8

PSB.2009.06.002

Error number

Also you can access troubleshooting by clicking Start Æ All programs Æ

EPSON ProjectorÆEMP NS ConnectionÆEMP NS Connection V2.51
Troubleshooting.

Page 2 of 8

PSB.2009.06.002

 Fixed error message displayed by the NVIDIA utility

Failure Symptom

When starting Quick Wireless/USB Display/NS Connection on a PC with
the built-in NVIDIA graphics chip (ex.ThinkPadT61 NVIDIA Quadro NVS
140M/NVIDIA Quadro FX 570M Display Driver), the NVIDIA utility
displays consecutive error messages. As a result, some PCs will
experience a lock-up.

Countermeasure

Hardware acceleration level is set to 3 when Quick Wireless/USB
Display/NS Connection are being used.

Limitation

By setting hardware acceleration level to “3”, the mouse cursor flickers
more visibly than the setting of “None”. This symptom can be avoided by
unchecking the box for Transfer Layered Window on the Adjustment
performance tab in the Set Options window of NS Connection.
Note: When NS connection is being used, and the hardware acceleration
setting is changed manually, at next startup, NS connection starts with
the same setting level of hardware acceleration.

Page 3 of 8

PSB.2009.06.002

Limitation All Operating Systems

• When using EAP type of security that consumes a lot of CPU resources,
projectors may disconnect from NS connection. The solution is to click
Set Options of NS Connection and set Adjust Performance to Fast.

• It takes more time for the PowerLite 1725 / 1735W / 1825 / Pro G5150 /
Pro G5350 projectors to disconnect from NS connection as compared to
the PowerLite 1705 / 1715 / 1815 projectors, due to the limitation of the
new OS (WindowsCE) on IM-X4 projectors.

• To avoid conflicts between the Quick Wireless and other makers’
utilities, when the Quick Wireless starts, this version stops services of
the other utilities listed in the attached file (Exhibit 1). When quitting
Quick Wireless, the other utilities resume their services.

• In the network environment using IEEE 802.11 b/g standards, the
wireless connection may drop under the following conditions. Due to
specification of wireless controllers, some wireless controllers don’t send
their beacon periodically. Even if a projector is connected to a PC via
wireless, if the projector doesn’t detect the beacon for 11b signal for a
certain period (30 – 60 seconds) from the PC , the projector judges that
there isn’t any PC using the11b signal in the network and switches to
communication with11g (default) signal. On the other hand the PC still
tries to communicate with 11b. As a result, the wireless connection
between the projector and the PC drops.

Solutions to this problem:

a. Establish a wireless communication between the PC and

projector via 802.11a signal.

Windows OS

• Due to a limitation of the module VLC for the Movie Sending mode
of the IM-X4 version projectors, when IM-X4 projectors display
MPEG2 and WMV images in Movie Sending mode via NSC V2.40,
fast-forward and rewind functions cannot be used. When IM-X3
projectors display MPEG2 via NSC V2.40, fast-forward and rewind
functions can be used.

Windows Vista OS

• Multi screen display function cannot be used

• Virtual display driver cannot be installed in PC.

• When UAC (User Account Controls) screen is being displayed, the

projected image pauses.

• The Motion picture of Windows photo gallery cannot be projected in full-

screen mode.

• Still images and motion pictures from Windows Media Center cannot be

projected in full-screen mode.

• Since NS Connection can capture Layered windows, the tool bar of NS

Connection is projected.

•

•

• When projecting images via NS Connection, mouse cursor might blink

depending on PC specification.

PSB.2009.06.002

Page 4 of 8

Macintosh OS

In case of uninstalling NSC V2.20 or later version, it is
possible to uninstall by following 2 methods.

- Delete by installer exclusively for NSC version which you
want to uninstall.

For example, when you want to uninstall NSC V2.40, you need

to use installer for NSC

V2.40. NSC V2.20 and later version can not be uninstalled

automatically by different

version installer.

- Delete manually.

System Requirements:

OS

Windows 2000 SP4/ XP Home Edition/ XP Professional(32bit)
/Vista SP1 Home Basic / Home / Premium / Ultimate / Business
/ Enterprise(32bit) Mac OS X 10.3 minimum, OS

10.3.9/10.4.5/10.5.1 recommended

CPU

Windows: Mobile Pentium III 1.2GHz at least (Pentium
M1.6GHz at least recommended)
Mac: Power PC G3 900MHz at least recommended

Memory
Available hard disk

At least 256MB (At least 512MB recommended）
At least 20MB

space
Display

Minimum- VGA(640×480), Maximum- UXGA (1600 x 1200)
16-bit color or more

Obtaining the Update:
Download epson13123.exe from www.epson.com to the version 2.50 update for NS
Connection.
The files are extracted and copied to C:\EPSON\epson13123_EMP_NS_Connection_251.
The user should be directed to this folder to find the bulletin. The program will automatically
install after the download file is extracted.

Note: on the Mac, the extraction process copies the epson13124_EMP_NS_Connection_251
folder to the desktop. The program and bulletin are inside this folder. The user will double-click
on NSCv2.51_Installer to start the installation process.

Software Upgrade History:

Version Release date Remarks

1.00 December 25,

New release

2002

1.10 January 1, 2003 Release for PowerLite 7850p

1.20 September 10, Improved the transfer rate specification for PowerPoint

Page 5 of 8

PSB.2009.06.002

2003 images

1.30 May 31, 2004 Support added for WPA and LEAP

1.31 June 18, 2004 Improved screen problem issue

1.32 January 18, 2004 Improved the internal function of connecting to the projector

1.40 April 1, 2005

• Addition of Presentation Mode and Interruption
Prevention function

• Able to present with video set for 32 bit color

• Function improvement with Excel and PowerPoint

• Improved ESSID search lockup prevention when

certain LAN adapters and drivers are used

2.00 2006/06/20

• Addition of multi screen display function

• Addition of movie sending mode

• - Improvement of connection and usability

2.10

2006/12/08

• Improvement in the ability to search projectors by
Automatic Search. (For Windows)

• Improvement in the operability of choosing projector.

• Improvement in operability and visibility of “Connect”

button.

• Preventing Virtual Display from being used as primary
display.

• Improvement in the ability of image processing speed.
(For Mac)

• - Change the packet size for a connection request
command used by Quick connection.

2.20 2006/05/29 EMP NS Connection V2.20 supports Windows Vista (Home
Basic
/Home Premium/Ultimate/Business/Enterprise).

2.30 Nov. 27, 2007

• Supported picture transfer for EMP-1825

• Improved wireless search and connection abilities.

• - Added video format supporting movie sending mode

2.40 Mar. 24, 2008

• EMP NS Connection V2.40 supports Windows Vista
Service Pack 1

• - Supports 24 languages

2.50 Jun.2,2008 Supported image transfer and virtual display of 1280 x 768

• Changed the operation method to prevent NS
connection from being blocked by Windows Firewall

Added another wireless LAN utility that NS connection
supports

2.51 Feb.9,2009 - Addition of supported models (PowerLite-85/825/826W)

- Addition of supported languages

- Addition of troubleshooting function (Only for Windows)

[Exhibit 1] Wireless LAN client list that NSC V2.30 and V2.40 stops their service
process

Page 6 of 8

PSB.2009.06.002

Supported by V2.30

Manufacturer

Name

Adapter Name Wireless LAN Utility

Name

D-Link Air Plus XTREMEG DWL-G650 D-Link AirPlus

XtremeG Utility (CD)

NETGEAR WN511T Smart Wireless Utility

Ver.1.1.5.9(CD)

BUFFALO Buffalo all products Client Manager 3

Ver.1.2.10(Web)

IBM ThinkPad products Access

Connection(Web) *1
Ver.4 or later

IBM ThinkPad products Access

Connection(Web) *1
Ver.3.71

Logitec Logitec LAN-WAG/U2 Wireless

LAN Adapter

Linksys Wireless-G Notebook Adapter

v.5.0

Logitec Wireless LAN
Client Utility

WPC54G-JP setting
utility

NETGEAR WG511AJP NETGEAR WG511A

Smart Wizard
Ver3.2.3.306

NETGEAR WGM511 NETGEAR SMART

WIZARD -Wireless
Assistant WGM511 Ver

1.0.0.7

NETGEAR WPNT511 NETGEAR WPNT511

SMART WIZARD
Ver1.1.3.0

Linksys WPC300N Wireless-N Notebook

Adapter Wireless
Network Monitor v1.05

Linksys WPC54G Wireless-G Notebook

Adapter Wireless
Network Monitor Ver

3.1

Linksys WPC54GX4 Wireless-G Notebook

Adapter with SRX400
Setup Wizard V1.1

Linksys WUSB54GP Wireless-G Portable

USB Adapter WLAN
Monitor v1.05

Linksys WUSBF54G Wireless-G USB

Adapter with Wi-Fi
Finder

NETGEAR WG511 v2

Page 7 of 8

PSB.2009.06.002

Linksys WPC54GX Wireless-G Notebook

Adapter With SRX
Wireless Network
Monitor v. 1.2

Supported by V2.40 Linksys WUSB54GSC Compact Wireless-G

USB Adapter Wireless
Network Monitor v1.05

Supported by Quick

Atheros Atheros Client Utility
Wireless
Connection V.1.00 /
NSC V2.50

Supported by Quick
Wireless Connection

Broadcom BCM4311 / BCM2050 Broadcom Wireless

Utility

v1.02 / NSCv2.51

NETGEAR WN511B NETGEAR WN511B

Smart Wizard Utility

NETGEAR WG111v3 NETGEAR WG111v3

Smart Wizard Utility

NETGEAR wn111 NETGEAR WN111

Smart Wizard Utility

NETGEAR WUSB600N Linksys Wireless

Network Monitor

PLANEX GW-US300MiniW PCI GW-US300MiniW

Utility

*1: Because Access Connection service stops, power display of Power Manager becomes

invalid.

Page 8 of 8

PSB.2009.06.002

EPSON PRODUCT SUPPORT BULLETIN

Date:
PSB #:
Reference:
Product(s):

Subject:

This bulletin was created to inform you of the release of the new version 4.30 of the Epson
EMP Monitor software utility.

Description of Change:

Improvements have been made to the EMP Monitor software utility.
Note: For the PowerLite 61p / 81p / 82c / 821p / 1810 / 260d (Latin America) / 280d (Latin

America) models, a serial to TCP/IP conversion adapter is necessary. The function of Auto
Update does not work for these models. You need to manually click on refresh to get an
updated status of projectors.

Reason:

The improved points of version 4.30 are as follows:

Application
Version

upgraded
Improved

points

04/20/2009
PSB.2009.06.001
TI 09-05e Rev. A/B
PowerLite 735c / Cinema 500 / 737c / 745c / 755c / 765c / 830p / 835p /
1705c / 1715c / 6100i / 6110i / 7800p / 7850p / 7900NL / 8300i / 8300i with
EasyMP.net module / 9300NL / 1815p / 1825 / 822p / 83c / 822+ / 83+ /
G5000 / Pro G5150 / Pro G5350 / Pro G5200W / 1725 / 1735W / 400W /
410W / 84 / 85 / 825 / 826W
PowerLite 61p / 81p / 82c / 821p / 1810 / 260d (Latin America) / 280d (Latin
America) with TCP/IP to Serial converter
Release of EMP Monitor for Windows version 4.30

EMP Monitor
Version 4.22 Æ Version 4.30

(1) Addition of 7 new languages

- Indonesian, Croat, Slovak, Bulgarian, Malay, Vietnamese, and
Hebrew

Existing 27 languages

- Chinese (Traditional), Netherlands, Danish, Polish, Hungarian,
Czech, Romanian, Slovene, Norwegian, Swedish, Finnish, Russian,
Ukrainian, Greek, Turkish, Arabic (Windows NT4 does not support),
English, Japanese, French, German, Italy, Spanish, Portuguese,
Chinese (Simplified), Korean, Catalan, Thai

Originator:

Authorization:

Total Pages:

JAM
5

Page 1 of 4

PSB.2009.06.001

(2) Addition of Input Source (Only PowerLite 84 / 85 / 825 / 826W)
Previous version of EMP Monitor included USB Display, USB and LAN as
one source: EasyMP.
The input source buttons for USB display, USB, and LAN are available as
separate input sources as shown below:

- Old version - EMP Monitor V4.22
EMP Monitor V4.22

- New version - EMP Monitor V4.30
EMP Monitor V4.30

.

(3) New feature for the PowerLite 84 / 85 / 825 / 826W.
Displays projector’s serial number in the Menu settings

- The projector’s serial number is now displayed in the projector’s
menu under “info”,

- EMP Monitor can also display the projector’s serial number as
shown below:

Page 2 of 4

PSB.2009.06.001

Limitations

When the PowerLite1725 / 1735W exhibit a Lamp Cover Open error state,
EMP Monitor cannot detect the error. The reason is that when the lamp
cover is opened, the primary power source that reports the error state to
EMP Monitor is turned off immediately. This is different from other models
which make the secondary power source turn off under the same condition.

Note: EMP Monitor Ver. 4.xx is not compatible with EMP Monitor Ver. 3.05 and earlier
versions. EMP Monitor Ver. 4.xx cannot read the setting files of EMP Monitor Ver. 3.05
and earlier versions.

System Requirements:

OS

• Windows 98 SE / Me / NT 4.0 (SP6) *Except Arabic and
Hebrew / Windows 2000 Pro / XP Home Edition / XP
Professional (32 bit) / Vista Home Basic / Home Premium /
Ultimate / Business / Enterprise (32 bit) *Except Ukrainian /
Vista SP1 Home Basic / Home Premium / Ultimate /
Business / Enterprise (32 bit)

• Internet Explorer Ver. 5.0 or later must be installed

CPU

Minimum: Pentium MMX 166 MHz (Recommended: Pentium II
233 MHz or higher)

Memory

At least 64 MB (Recommended: 128 MB or above)

Available hard disk

At least 50 MB

space
Display

SVGA (800×600) or higher resolution, 32 bit or higher display
color

Obtaining the Update:

Download epson13055.exe from

www.epson.com to get the version 4.30 update for EMP

Monitor. The files are extracted and copied to C:\EPSON\epson13055_emp_monitor_430.
This file is a self-extracting archive and will start the installation utility for EMP Monitor. Follow

the on-screen instructions during the installation process.

Page 3 of 4

PSB.2009.06.001

Software Upgrade History:

Version Release date Remarks

3.00 December

Supported PowerLite 735c

25,2002

3.01 February

Supported PowerLite 7800p / 8300i

26,2003

3.02 April
18,2003

3.03 November

Supported PowerLite 7850p / 8300i with EasyMP.net option
module
Supported PowerLite Cinema 500

21,2003

3.04 April
1, 2004

4.01 October
18, 2004

4.02 August
29, 2005

Supported Serial -TCP/IP conversion adapter for PowerLite
61p / 81p
Supported projectors that are configured on a large-scale
network.
Addition of timer function and auto search function by
specifying IP addresses.
Improvement of communication logs size.

4.10 May
8, 2006

4.20 May
15, 2007

4.21 September

Addition of new functions, Improvement of usability, and
Corresponding to PowerLite 6100i.

EMP NS Connection V2.20 supports Windows Vista (Home
Basic / Home Premium / Ultimate / Business / Enterprise).

Supported 25 languages

26, 2007

4.22 March 31, 2008 Supported 27 languages

Addition of new Error Information
Supported Video (BNC)

4.30 April 3, 2009 Supported 34 languages

Additional Input Sources
Displays projector’s serial number in Menu settings

Page 4 of 4

PSB.2009.06.001

EPSON PRODUCT SUPPORT BULLETIN

Date:
PSB #:
Reference:
Product(s):

Subject:

This bulletin was created to inform you about the release of Epson Check Tool software
for Network Projectors version 1.00.

Description of Change:

First release of the Check Tool for Network Projectors for Windows

Reason:

The Check Tool for Network Projectors makes it possible to easily check whether
EPSON Quick Wireless Connection and EMP NS Connection’s Quick Connection mode
can operate on the users’ Windows PC properly. The Check Tool for Network Projector
can also be used as a reference check before the purchase of the projector or as a
troubleshooting Tool.

1) Function of the Application

Application
name

Notes

12/18/2008
PSB.2009.01.006
TI 08-22e Rev. A/B
PowerLite 735c / 737c / 745c / 755c / 765c / 835p
1705c / 1715c / 1815p / 1825p / 7850p / 8300i with EasyMP.net option
Pro G5150 / Pro G5350 / 1725 / 1735W
Release of Check Tool for Network Projectors V1.00 (for Windows)

Check Tool for Network Projector V1.00

The Check Tool checks automatically whether EMP Quick
Wireless Connection and EMP NS Connection’s Quick
Connection mode can operate properly on the user’s Windows PC
in terms of the following four points:

1. Checks OS support.

• Checks whether the OS is supported by EMP Quick
Wireless Connection / EMP NS Connection.

2. Checks user account

• Checks user’s account for administrator privileges to
install EMP Quick Wireless Connection / EMP NS
Connection.

3. Checks the wireless LAN adapter

• Checks whether the wireless LAN adapter and
driver are installed on the PC.

• Checks whether the wireless LAN is active.

Originator:

Authorization:

Total Pages:

DS
7

Page 1 of 7

PSB.2009.01.006