Page 1
®
HDTV LCD Projection Television
Téléviseur à projection ACL à haute définition
About Your Manual
The instructions included with this TV are for your model of the Epson Livingstation, as well
as the other models listed on the cover of the manual.
The instructions refer to an external tuner, which is not included with the LS47P2C or
LS57P2C. Otherwise, they are correct for your TV and describe how to operate it fully.
À propos de votre manuel
La documentation ci-jointe s’applique à votre modèle de téléviseur Epson Livingstation, ainsi
qu’à tous les modèles énumérés sur la couverture du guide.
Les instructions mentionnent un syntoniseur externe qui n’est pas fourni avec les modèles
LS47P2C ou LS57P2C. Autrement, les instructions s’appliquent à votre téléviseur et
expliquent son fonctionnement en détail.
Printed in USA/Imprimé aux É.-U.
CPD-18886
Page 2
®
HDTV LCD Projection Television
About Your Manual
The manual and setup sheet included in this package are for the following television models:
LS47P2 LS57P2
LS47P1D LS57P1D
Although your model number may not appear on the cover of the manual, the instructions
are correct for your TV and describe how to operate it fully.
CPD-18635
Printed in USA
Page 3
®
HDTV LCD Projection Television
Selecting a Channel
Follow these steps to select a channel from the Electronic Program Guide (EPG):
1 Make sure you are tuned to a digital (High Definition) channel; your tuner does not support the EPG for
non-digital channels.
Note
If you see a message that the EPG is not supported, press the up or down arrow button on your tuner’s remote control to switch to
a digital channel.
2 Press the EPG button on the tuner’s remote control twice. You see the Channel Guide.
3 Use the up and down arrow buttons on the tuner’s remote control to scroll through the guide. Highlight the
Physical Channel that is on the same row as the Virtual Channel you want.
4 Press the Enter button. The image for the first Virtual Channel in the row appears in the preview box in the
upper right corner. (In the screen above, the image from KCET-HD 28-01 is displayed.)
5 Press the Exit button on the remote control twice. The screen displays the previewed image.
6 To select another Virtual Channel in the same row, press the up arrow button on the tuner’s remote control
until you see the image for the channel you want. To move back to a previous channel in the row, press the
down arrow button.
Note
You can also use the numeric keypad on the tuner or television remote control to select a channel. For instructions on using the
tuner’s remote control to select a channel, see “Selecting Digital Channels” in your tuner’s User’s Guide.
CPD-18867R1
Printed in USA
Loading...