Epson H715A User Manual
Home Cinema 4000
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User’s Guide.
Choose a location
Keep the projector level and place it at a height so its lens is even with the top
or bottom of the screen and is centered horizontally. If this isn’t possible, use
the lens shift feature or the keystone correction button on the projector to
reposition the image (see “Adjust the image”).
In order to view 3D images correctly, RF 3D glasses must be worn within 32 feet
(10 m) of the projector. Use the image below to determine the viewing distance
for 3D projection (the shading represents the 3D viewing area):
Press the power button on the projector or the On button on the
3
remote control. The shutter opens and the power light flashes blue,
then stays on.
Note: To shut down the projector, press the power button on the
projector or the Standby button on the remote control, then press the
button again to confirm, if necessary. Wait for cooldown to complete
before unplugging the projector.
Use the arrow buttons on the remote control to highlight any of the
4
options on the Home screen that appears, then press Enter to select it.
You can display a QR code, switch between projection sources, and quickly
access various adjustment options from this screen.
See the online User’s Guide for more information on where to place your
projector.
Connect the projector
Connect multiple video devices and use the Source buttons on the remote
control or the button on the projector to switch between them. For
additional connection types, see the online User’s Guide.
HDMI cable
Optical HDMI
Note: When connecting a source that requires HDCP 2.2, you must use the
HDMI1 port.
The default language of the menu system is English. To select another
5
language, press the Menu button on the projector or remote control.
Select Extended and press Enter. Select Language and press Enter.
Select your language and press Enter. Press the Menu button to exit
the menu system.
Using the remote control
Install the batteries as shown (two AA batteries).
Turn on your equipment
Turn on your video source.
1
Plug in the projector.
2
Turn projector on
Choose which source to
display
Control connected
sources with HDMI
Link
Adjust zoom, focus,
and lens shift
Access projector menus
Turn projector off
Turn off projector
display
Navigate projector
menus
For more information on using the remote control, see the online User’s Guide.
Adjust the image
Press the Pattern button on the remote control to display a test pattern.
1
To raise the image or correct a tilted image, adjust the front feet as
2
shown below.
If your image looks like or , you can use the buttons on the
6
projector to correct this.
Note: Using the keystone adjustment can affect the size and effective
resolution of your image. If possible, change the position of your
projector to eliminate the keystone effect and use the lens shift option
to position the image as necessary.
Press Esc to exit.
7
Press the Lens button on the remote control and use the and buttons
3
to focus the image.
Press the Lens button on the remote control again and use the and
4
buttons to reduce or enlarge the image.
Viewing 3D images
To view 3D content, you must first connect a 3D-compatible video device to
one of the HDMI ports on your projector. You also need a pair of Epson® (part
number V12H548006) or Epson-compatible RF 3D active shutter glasses.
Turn on and begin playback on the 3D-compatible video device.
1
Note: Make sure you set the video device to play content in 3D mode.
Slide the power switch on your 3D glasses to the On position.
2
Press the Lens button on the remote control again and use the , ,
5
, and buttons to reposition the image.
Note: If the glasses don’t automatically display 3D content, you may need
to pair them with the projector. Move the glasses within 10 feet (3 m) of the
projector, then press and hold the Pairing button on the 3D glasses for at
least 3 seconds. The status light on the glasses will alternately flash green and
red, then remain green for 10 seconds if pairing is successful.
You can also automatically convert 2D HDMI content to 3D. To enable the
2D-to-3D Conversion option, press the Menu button on the projector or
remote control. Select Signal and press Enter, then select 3D Setup and
press Enter. Select 2D-to-3D Conversion and press Enter. Select the Weak,
Medium, or Strong setting, then press Enter.
See the online User’s Guide for more information on adjusting 3D images.
Loading...