H6000IIP - TM Two-color Thermal Line
Epson H6000IIP - TM Two-color Thermal Line, C31C489111 - TM J7000P B/W Inkjet Printer, U01II - UB Print Server, OPOS ADK User Manual
EPSON OPOS ADK MANUAL
User's Manual
(Installer/ SetupPOS/ TMUSB)
Version 2.65 Jul. 2009
Version 2.65 Jul. 2009
ii
User's Manual
Installer, SetupPOS, TMUSB
Notes
(1) Reproduction of any part of this documentation by any means is prohibited.
(2) The contents of this documentation are subject to change without notice.
(3) Comments and notification of any mistakes in this documentation are gratefully
accepted.
(4) This software cannot be used with other equipment that the specified.
(5) EPSON will not be responsible for any consequences resulting from the use of any
information in this documentation.
Trademarks
Microsoft®, Windows®, Windows Vista™, Visual Basic® and Visual C++® are trademarks
or registered trademarks of Microsoft Corporation in the United States and/or other
countries.
EPSON® and ESC/POS® are registered trademarks of SEIKO EPSON CORPORATION.
Other product and company names used herein are for identification purposes only and
may be trademarks or registered trademarks of their respective companies.
Copyright © 2000-2009 SEIKO EPSON CORPORATION
Version 2.65 Jul. 2009
iii
User's Manual
Installer, SetupPOS, TMUSB
Contents
SECTION 1. INTRODUCTION ............................................................................................1
SECTION 2. DEVELOPME
NT OUTLINE............................................................................2
2.1. Features....................................................................................................................2
2.2. Operating
Envi
ronment .............................................................................................2
2.3. Necessary System Components.............................................................................11
SECTION 3. INSTALLATION............................................................................................13
3.1. Features of the Insta
ller...........................................................................................13
3.2. Explanation of Installe
r Disks..................................................................................14
3.3. Installation
...............................................................................................................14
3.3.1. First Installation
................................................................................................14
3.3.2. Overwriting Installation
.....................................................................................22
3.4. Files to be installed .................................................................................................40
3.5. Types of Installation................................................................................................41
3.6. CO Registration.......................................................................................................41
3.6.1. The method for updating the CCO....................................................................42
3.7. INI Files...................................................................................................................42
3.8. System Setup Files.................................................................................................42
3.9. Installation Using the Registry File
..........................................................................42
3.10. Add-in Functions (Serv
ice Pack)...........................................................................44
3.11. Silent In
stallation...................................................................................................47
3.12. Messages for Installation.......................................................................................50
3.12.1. Messages at the Ti
me of Startup....................................................................50
3.12.2. Messages during In
stallation..........................................................................51
3.12.3. Message during Driver Installation after EPSON OPOS ADK Instal
lation......53
3.12.4. Messages When the Silent Mode is specifie
d ................................................53
3.12.5. Messages Related to Registry File.................................................................54
3.12.6. Messages during Coexisting Installation
.........................................................54
3.12.7. Add-in Installation Messages
..........................................................................55
3.13. Precautions for Inst
allation....................................................................................55
SECTION 4. UNINSTALLATION ......................................................................................58
4.1. Uninstallation Procedures .......................................................................................58
4.2. Types of Uninstallation
............................................................................................59
4.3. Silent Uninstallation.................................................................................................59
Version 2.65 Jul. 2009
iv
User's Manual
Installer, SetupPOS, TMUSB
4.4. Messages for Uninstallation....................................................................................62
4.5. Precautions for Uninstallation..................................................................................63
SECTION 5. SETUPPOS UTILITY.................................................................................... 64
5.1. Starting and Exiting.................................................................................................64
5.1.1. Starting
SetupPOS ...........................................................................................64
5.1.2. Exiting SetupPOS.............................................................................................64
5.2. About the Basic Operations (MAIN WINDOW)
........................................................65
5.2.1. Menu.................................................................................................................65
5.2.2. Tool Ba
r............................................................................................................97
5.2.3. Left Pane
..........................................................................................................97
5.2.4. Right Pane........................................................................................................98
5.2.5. Pop-up Menus ................................................................................................101
5.2.6. Drag-and-drop ................................................................................................106
5.3. Using Wizards.......................................................................................................107
5.3.1. Using
the Add New Device wizard
..................................................................107
5.3.2. Using the USB Auto
Setup Wizard ..................................................................121
5.4. About the Warning Dialog Box
..............................................................................122
5.4.1. The Contradictory Warning of a Setup of Registry .........................................122
5.5. Messag
es..............................................................................................................127
5.5.1. Messages Explanations
..................................................................................127
5.6. Using th
e Keyboard Hook Control Utility
...............................................................132
5.6.1. Functions........................................................................................................132
5.6.2. Activati
on........................................................................................................132
5.6.3. Device Dependency
........................................................................................133
5.7. Using Devi
ces.......................................................................................................134
5.7.1. Setting up a Device.........................................................................................134
5.7.2. Removing a Device
.........................................................................................136
5.8. Glossary
................................................................................................................136
SECTION 6. EPSON TM USB DRIVER..........................................................................139
6.1. Installation
.............................................................................................................139
6.1.1. Windows 2000................................................................................................139
6.1.2. Windows XP...................................................................................................139
6.1.3. Windows Vista................................................................................................140
6.1.4. Precautions.....................................................................................................140
6.2. Updating an old vers
ion of the USB device driver.................................................141
6.2.1. Windows
2000................................................................................................141
6.3. Naming Devi
ces....................................................................................................141
6.3.1. Device Names in the Registry ........................................................................141
Version 2.65 Jul. 2009
v
User's Manual
Installer, SetupPOS, TMUSB
6.4. Port Names on OPOS...........................................................................................142
SECTION 7. WARNINGS................................................................................................144
7.1. Precauti
ons for Connecting with USB I/F
..............................................................144
Version 2.65 Jul. 2009
1
User's Manual
Installer, SetupPOS, TMUSB
Section 1. Introduction
This manual contains an outline of the EPSON OPOS ADK program, and provides
installation and setup instructions for the OPOS Setup program.
EPSON OPOS ADK contains software with API functions that can be used easily through
ActiveX controls supported by Visual Basic on a computer running Windows 2000,
Windows XP or Windows Vista platforms. Application developers using the Windows 2000,
Windows XP or Windows Vista operating systems, without any concern for attached
peripherals type or protocol, can develop real-time, multitasking, GUI-based, POS
applications with lots of functionality.
Section 2, Development Outline, describes the requirements and uses of EPSON OPOS
ADK, and lists what is included in the package.
Section 3, Installation, contains directions on how to install the program.
Section 4, Uninstallation, contains directions on how to uninstall the program.
Section 5, SetupPOS Utility, shows you how to use the program to record information
about OPOS devices in the system registry.
Section 6, Epson TM USB Driver, provides details on how to install the USB driver and the
device names.
Section 7, Warnings, describes the matters that demand attention.
The “UPOS 1.11”, created by the OPOS committee, describes API functions in detail. The
Application Development Guide describes application development. Please refer to these
manuals for information on these subjects.
Version 2.65 Jul. 2009
2
User's Manual
Installer, SetupPOS, TMUSB
Section 2. Development Outline
This section describes development outline for the EPSON OPOS ADK.
2.1. Features
EPSON OPOS ADK offers standardized API functions th
at interface with
peripherals used in POS systems through ActiveX controls that can be run in
Visual Basic, operating on the Windows 2000, Windows XP or Windows Vista
platforms. Through these standardized API functions, you can develop powerful,
open POS systems easily.
2.2. Operating Environment
The EPSON
OPOS ADK
operates under the following environment.
• Computer Hardware
IBM PC/AT or compatible
* Please follow the specifications recommended by your OS for system
requirements (CPU, RAM, etc.).
• Operating Systems
Windows 2000
Windows XP
Windows Vista
Windows Embedded for Point Of Service
Windows Embedded POSReady 2009
* For the details of each operation system version, refer to the release note
included in the Installation disks.
* Internet Explorer: Version 5.0 or higher (Recommend)
* There are unsupported devices in Windows Vista environment.
For details of contents, please refer to "Accessible Devices" of next page.
• Accessible Serial Ports
COM1, COM2, COM3, COM4 (extended port functions allow use of
COM5 though COM10)
Version 2.65 Jul. 2009
3
User's Manual
Installer, SetupPOS, TMUSB
• Accessible Parallel Ports
LPT1, LPT2, LPT3 (operation is unverified in LPT3)
• Accessible USB ports
USB equipment must be connected to the IBM PC/AT compatible
machines that are equipped with USB connectors or use USB expansion
cards (however, the operating system must be the English version of
Windows 2000, Windows XP or Windows Vista when USB is used.)
If the USB device cannot be identified when an IBM PC/AT compatible
machine equipped with a USB connector is in use (especially for
machines put on the market prior to the English version of Windows 98
being available), contact the manufacturer.
• Accessible Network
Ethernet and IEEE802.11b support applies to TCP/IP compliant
networks. The setup of a compliant network should be handled by a
qualified network administrator.
• Supported Languages
Microsoft Visual Basic Version 5.0 or higher
Microsoft Visual C++ Version 5.0 or higher
• Accessible Devices
Line Displays:
EPSON DM-D210
EPSON DM-D110U (USB)
EPSON DM-D210U (USB)
EPSON DM-D500
EPSON DM-D500U (USB)
EPSON DM-D120
*1
(For ARCX(IM-700))
*1
The operation is not supported in Windows Vi sta environment.
MICR:
EPSON TM-H5000II with MICR
EPSON TM-H5000IIP with MICR
EPSON TM-H5000IIU with MICR (USB)
EPSON TM-H5000IIE with MICR (Ethernet)
Version 2.65 Jul. 2009
4
User's Manual
Installer, SetupPOS, TMUSB
EPSON TM-U675 with MICR
EPSON TM-U675P with MICR
EPSON TM-U675U with MICR (USB)
EPSON TM-U675E with MICR (Ethernet)
EPSON TM-U950 with MICR
EPSON TM-H6000II with MICR
EPSON TM-H6000IIP with MICR
EPSON TM-H6000IIU with MICR (USB)
EPSON TM-H6000IIE with MICR (Ethernet)
EPSON TM-J7000/J7100 with MICR
EPSON TM-J7000P/J7100P with MICR
EPSON TM-J7000U/J7100U with MICR (USB)
EPSON TM-J7000E/J7100E with MICR (Ethernet)
EPSON TM-H5200 with MICR
EPSON TM-H5200P with MICR
EPSON TM-H5200U with MICR (USB)
EPSON TM-H5200E with MICR (Ethernet)
EPSON TM-H6000III with MICR
EPSON TM-H6000IIIP with MICR
EPSON TM-H6000IIIU with MICR (USB)
EPSON TM-H6000IIIE with MICR (Ethernet)
POS Printers:
EPSON RP-U420
EPSON RP-U420P
EPSON TM-295
EPSON TM-295P
EPSON TM-H5000II
EPSON TM-H5000IIP
EPSON TM-H5000IIU (USB)
EPSON TM-H5000IIE (Ethernet)
EPSON TM-H5000IIM
EPSON TM-H5000IIPM
EPSON TM-H5000IIMU (USB)
EPSON TM-H5000IIME (Ethernet)
EPSON TM-L60II
Version 2.65 Jul. 2009
5
User's Manual
Installer, SetupPOS, TMUSB
EPSON TM-L60IIP
EPSON TM-T90
EPSON TM-T90P
EPSON TM-T90U (USB)
EPSON TM-T90E (Ethernet)
EPSON TM-U230
EPSON TM-U230P
EPSON TM-U230U (USB)
EPSON TM-U230E (Ethernet)
EPSON TM-U325
EPSON TM-U325P
EPSON TM-U325U (USB)
EPSON TM-U325E (Ethernet)
EPSON TM-U375
EPSON TM-U375P
EPSON TM-U590
EPSON TM-U590P
EPSON TM-U590U (USB)
EPSON TM-U590E (Ethernet)
EPSON TM-U590M
EPSON TM-U590PM
EPSON TM-U590MU (USB)
EPSON TM-U590ME (Ethernet)
EPSON TM-U675
EPSON TM-U675P
EPSON TM-U675U (USB)
EPSON TM-U675E (Ethernet)
EPSON TM-U675M
EPSON TM-U675PM
EPSON TM-U675MU (USB)
EPSON TM-U675ME (Ethernet)
EPSON TM-U950
EPSON TM-U950P
EPSON TM-U230M
EPSON TM-U230PM
EPSON TM-U230MU (USB)
EPSON TM-U230ME (Ethernet)
Version 2.65 Jul. 2009
6
User's Manual
Installer, SetupPOS, TMUSB
EPSON TM-J2000/J2100
EPSON TM-J2000P/J2100P
EPSON TM-J2000U/J2100U (USB)
EPSON TM-J2000E/J2100E (Ethernet)
EPSON TM-L90
EPSON TM-L90P
EPSON TM-L90U (USB)
EPSON TM-L90E (Ethernet)
EPSON TM-U210DM
EPSON TM-U210DPM
EPSON TM-U210DMU (USB)
EPSON TM-U210DME (Ethernet)
EPSON TM-H6000II
EPSON TM-H6000IIP
EPSON TM-H6000IIU (USB)
EPSON TM-H6000IIE (Ethernet)
EPSON TM-H6000IIM
EPSON TM-H6000IIPM
EPSON TM-H6000IIMU (USB)
EPSON TM-H6000IIME (Ethernet)
EPSON TM-T88III
EPSON TM-T88IIIP
EPSON TM-T88IIIU (USB)
EPSON TM-T88IIIE (Ethernet)
EPSON TM-T88IIIM
EPSON TM-T88IIIPM
EPSON TM-T88IIIMU (USB)
EPSON TM-T88IIIME (Ethernet)
EPSON TM-L90M
EPSON TM-L90PM
EPSON TM-L90MU (USB)
EPSON TM-L90ME (Ethernet)
EPSON TM-T90M
EPSON TM-T90PM
EPSON TM-T90MU (USB)
EPSON TM-T90ME (Ethernet)
EPSON TM-J2000M/J2100M
Version 2.65 Jul. 2009
7
User's Manual
Installer, SetupPOS, TMUSB
EPSON TM-J2000PM/J2100PM
EPSON TM-J2000MU/J2100MU (USB)
EPSON TM-J2000ME/J2100ME (Ethernet)
EPSON TM-J7000/J7100
EPSON TM-J7000P/J7100P
EPSON TM-J7000U/J7100U (USB)
EPSON TM-J7000E/J7100E (Ethernet)
EPSON TM-J7500/J7600
EPSON TM-J7500P/J7600P
EPSON TM-J7500U/J7600U (USB)
EPSON TM-J7500E/J7600E (Ethernet)
EPSON TM-U220A
EPSON TM-U220AP
EPSON TM-U220AU (USB)
EPSON TM-U220AE (Ethernet)
EPSON TM-U220B
EPSON TM-U220BP
EPSON TM-U220BU (USB)
EPSON TM-U220BE (Ethernet)
EPSON TM-U220D
EPSON TM-U220DP
EPSON TM-U220DU (USB)
EPSON TM-U220DE (Ethernet)
EPSON TM-U220AM
EPSON TM-U220APM
EPSON TM-U220AMU (USB)
EPSON TM-U220AME (Ethernet)
EPSON TM-U220BM
EPSON TM-U220BPM
EPSON TM-U220BMU (USB)
EPSON TM-U220BME (Ethernet)
EPSON TM-U220DM
EPSON TM-U220DPM
EPSON TM-U220DMU (USB)
EPSON TM-U220DME (Ethernet)
EPSON TM-P60
EPSON TM-P60W (IEEE802.11b)
Version 2.65 Jul. 2009
8
User's Manual
Installer, SetupPOS, TMUSB
EPSON TM-H5200
EPSON TM-H5200P
EPSON TM-H5200U (USB)
EPSON TM-H5200E (Ethernet)
EPSON TM-U220AM_BM
EPSON TM-U220APM_BM
EPSON TM-U220AM_BMU (USB)
EPSON TM-U220AM_BME (Ethernet)
EPSON TM-U220BM_BM
EPSON TM-U220BPM_BM
EPSON TM-U220BM_BMU (USB)
EPSON TM-U220BM_BME (Ethernet)
EPSON TM-U220DM_BM
EPSON TM-U220DPM_BM
EPSON TM-U220DM_BMU (USB)
EPSON TM-U220DM_BME (Ethernet)
EPSON TM-T88IIIX
*1
(For ARCX(IM-700))
EPSON TM-T88IIIXM
*1
(For ARCX(IM-700))
EPSON TM-H6000III
EPSON TM-H6000IIIP
EPSON TM-H6000IIIU (USB)
EPSON TM-H6000IIIE (Ethernet)
EPSON TM-H6000IIIM
EPSON TM-H6000IIIPM
EPSON TM-H6000IIIMU (USB)
EPSON TM-H6000IIIME (Ethernet)
EPSON TM-P60PEELER
EPSON TM-P60PEELERW (IEEE802.11b)
EPSON TM-U120M
EPSON TM-U120PM
EPSON TM-T88IV
EPSON TM-T88IVP
EPSON TM-T88IVU (USB)
EPSON TM-T88IVE (Ethernet)
EPSON TM-T88IVM
EPSON TM-T88IVPM
EPSON TM-T88IVMU (USB)
Version 2.65 Jul. 2009
9
User's Manual
Installer, SetupPOS, TMUSB
EPSON TM-T88IVME (Ethernet)
EPSON TM-T70
EPSON TM-T70P
EPSON TM-T70U (USB)
EPSON TM-T70E (Ethernet)
EPSON TM-295M
EPSON TM-295PM
EPSON TM-U950M (EPROM)
EPSON TM-U950PM (EPROM)
EPSON TM-U950M (FlashROM)
EPSON TM-U950PM (FlashROM)
EPSON TM-T88IVReStick
EPSON TM-T88IVReStickP
EPSON TM-T88IVReStickU (USB)
EPSON TM-T88IVReStickE (Ethernet)
*1
The operation is not supported in Windows Vi sta environment.
Cash Drawer:
Standard Cash Drawer for TM series (Serial, Parallel, USB, Ethernet)
Multi_A Cash Drawer (2 Drawer) (Serial, Parallel, USB, Ethernet)
Multi_B Cash Drawer (2 Drawer) (Serial, Parallel, USB, Ethernet)
Hard Totals:
*1
EPSON IM-700 CompactFlash (For ARCX (IM-700))
EPSON SR-610 CompactFlash (For URBANII (SR-610))
*1
The operation is not supported in Windows Vi sta environment.
MSR:
*1
EPSON DM-MS123 (For URBANII (SR-610))
EPSON DM-M820 (For MR (IM-800))
EPSON DM-MX112/DM-MX123 (For ARCX (IM-700))
*1
The operation is not supported in Windows Vi sta environment.
Keylock:
*1
EPSON DM-KX060 (For ARCX (IM-700), URBANII (SR-610))
*1
The operation is not supported in Windows Vi sta environment.
Version 2.65 Jul. 2009
10
User's Manual
Installer, SetupPOS, TMUSB
CheckScanner:
EPSON TM-H6000II with Scanner
EPSON TM-H6000IIP with Scanner
EPSON TM-H6000IIU with Scanner (USB)
EPSON TM-H6000IIE with Scanner (Ethernet)
EPSON TM-H6000III with Scanner
EPSON TM-H6000IIIP with Scanner
EPSON TM-H6000IIIU with Scanner (USB)
EPSON TM-H6000IIIE with Scanner (Ethernet)
ElectronicJournal:
EPSON TM-H6000III
EPSON TM-H6000IIIP
EPSON TM-H6000IIIU (USB)
EPSON TM-H6000IIIE (Ethernet)
EPSON TM-H6000IIIM
EPSON TM-H6000IIIPM
EPSON TM-H6000IIIMU (USB)
EPSON TM-H6000IIIME (Ethernet)
EPSON TM-T88IV
EPSON TM-T88IVP
EPSON TM-T88IVU (USB)
EPSON TM-T88IVE (Ethernet)
EPSON TM-T88IVM
EPSON TM-T88IVPM
EPSON TM-T88IVMU (USB)
EPSON TM-T88IVME (Ethernet)
Version 2.65 Jul. 2009
11
User's Manual
Installer, SetupPOS, TMUSB
2.3. Necessary System Components
In order to develop an application using OPOS API, the following hardware and
software are necessary.
• Computer Body Parts
IBM PC/AT Interchange Machine
* Please follow the specifications recommended by your OS for system
requirements (CPU, RAM, etc.).
• Operating System
Windows 2000
Windows XP
WIndows Vista
Windows Embedded for Point Of Service
Windows Embedded POSReady 2009
• Floppy Disk Drive
One or more floppy disc drives
• Hard Disk, Memory
At least 10M bytes hard disk capacity is needed except for
recommended blank capacity of using OS (Windows 2000, Windows XP,
WIndows Vista).
• Disks
Please confirm that your package contains all the following items.
Install Disks:
EPSON OPOS ADK Installation Disk x
These disks include software, manuals and sample programs
Sample Programs:
EPSON OPOS ADK Install Disk contains practical sample
program guides using common API for each device. The method
for use is described on the sample program guide. Please copy
onto the hard disk as necessary.
Manuals:
On-line manuals are included on EPSON OPOS ADK Disk.
USER’S GUIDE
Information on EPSON OPOS ADK installation and setup.
APPLICATION DEVELOPMENT GUIDE
Version 2.65 Jul. 2009
12
User's Manual
Installer, SetupPOS, TMUSB
Programming examples and explanations of factors governing
of peripherals. The Application Development Guide is divided
into common subjects and device subjects. The common
subjects portion contains general information about OPOS and
device classes. The device subjects’ portion contains
information about specific devices. Please refer to common
subjects and device subjects for the device being used.
SAMPLE PROGRAM GUIDE
Contains outlines, detailed explanations, and notes on the
sample program included on the EPSON OPOS ADK.
Version 2.65 Jul. 2009
13
User's Manual
Installer, SetupPOS, TMUSB
Section 3. Installation
Running the EPSON OPOS ADK Installer program can perform all the processing required
for installation of the EPSON OPOS ADK. To ensure optimal use of the OPOS, various
functions are offered during installation. Please read this manual for details.
When installing or reinstalling, first ensure that all running application programs are closed;
both those use the OPOS files as well as any other applications.
After installing of EPSON OPOS ADK, it is necessary to confirm the setup, such as port
and device settings. For details, please refer to "Section 5. SetupPOS Utility" of this
manual.
The EPSON OPOS ADK install program is explained in the following.
3.1. Features of the Installer
This Installer is
created using InstallShield 12.
The Installer
performs the following operations:
• Specifies the destination directory for installation
• Specifies the destination folder for installation
• Specifies the initial settings for OPOS
• Specifies REG files
• Installation type
y Full installation ("Common CO" or "EPSON CO")
y Custom installation
(1) Selection of device class units, Selection of CO
(2) Selection of the old and new CO (Selection of the CO install)
• Installation of the manual and the Sample Program
• Installation of the driver of EPSON TM USB
• Installation of the driver of parallel
• Uninstallation type
y Full uninstallation (all)
y Custom uninstallation
(3) Selection of the SO
• Add-in (Service Pack, File update)
• Silent mode installation/uninstallation
Version 2.65 Jul. 2009
14
User's Manual
Installer, SetupPOS, TMUSB
3.2. Explanation of Installer Disks
There is only a CD-ROM install disk. The installation from the FD is not supported.
Install according to the following procedure.
3.3. Installation
The procedu
re of install is as follows:
When Windo
ws 2000, Windows XP or Windows Vista is used, installation can be
done only by authorized users of the PC installation. Please request the
authorized users for help.
Installation of the EPSON TM USB Driver (EPSON USB controller for TM printer
series) is required when the USB POSPrinter, LineDisplay, MICR, CheckScanner,
CashDrawer and ElectronicJournal are to be used. Without the installation in
advance, the devices used with USB port cannot be registered normally. Also,
use the Windows 2000, Windows XP or Windows Vista when EPSON OPOS
USB devices are to be used.
For details of EPSON TM USB Driver, please refer to the "Section 6 EPSON TM
USB Drive"of this manual.
3.3.1.
First Installation
Without the installation of EPSON OPOS ADK in
advance, install according to the
following procedure.
<Installation Procedure>
(1) Run the SETUP.EXE program on disk 1.
If Setup is executed while other program is running, its operation is not
guaranteed. It is suggested to close all programs before executing Setup.
Startup of the Setup program may take some time.
Version 2.65 Jul. 2009
15
User's Manual
Installer, SetupPOS, TMUSB
(2) The “Welcome” dialog is displayed.
Read the contents and then select the [Next] button if agreed with the
contents.
(3) The “Software License Agreement” dialog box is displayed.
To install the EPSON OPOS ADK, the user must agree to the contents of
the displayed agreement. Read the contents. Select “I accept the terms of
the license agreement” if agreed with the Software License Agreement.
After the selection, the [Next] button becomes effective. Select the [Next]
button. If the Software License Agreement is not acceptable, select “I do
not accept the terms of the license agreement”. Then, select the [Cancel]
Version 2.65 Jul. 2009
16
User's Manual
Installer, SetupPOS, TMUSB
button. Exits installation. Select the [Back] button for returning to the
previous dialog box.
(4) The “Select Registry File” dialog box is displayed.
Select “No Registry File” not to use the REG file. Then, select the [Next]
button. Select “Use Registry File” to use the REG file. Enter the full path
REG file name after the text box is enabled. Then, select the [Next] button.
Press the [Browse...] button to specify the folder name that includes the
REG file. The REG file is a file for restoring information related to EPSON
OPOS ADK. Use the SetupPOS utility to create this file. If an improper
Registry File is selected, an error message will be displayed and it will not
be possible to move to the next dialog box. Follow the directions of the
error message and confirm that the Registry File is correct.When the
Registry File is set correctly, subsequent information can be referred from
the Registry File.
Select the [Back] button for return to the previous dialog box.
Select the [Cancel] button for quitting.
Version 2.65 Jul. 2009
17
User's Manual
Installer, SetupPOS, TMUSB
(5) The “Setup Type” dialog box is displayed.
Select a setup type to be installed. Selectable types are “Developer”,
“User” and “Custom”.
The details of type are as follows：
Developer
Components:
Full installation of programs
Manual
SampleProgram
CO:
<Windows 2000/XP> CCO
<Windows Vista> CCO
User
Components:
Full installation of programs
CO:
<Windows 2000/XP> CCO
<Windows Vista> CCO
Custom
Select components to be installed.
Version 2.65 Jul. 2009
18
User's Manual
Installer, SetupPOS, TMUSB
(6) After selecting a type, press the [Next] button.
When the "Developer" or the "Users" have been selected, the “Start
Copying Files” dialog box is displayed. Confirm the contents and select the
[Next] button.
When the "Custom” has been selected, the “Select CO Type” dialog box is
displayed.
Select the [Back] button for return to the previous dialog box.
Select the [Cancel] button for quitting.
(7) The “Select CO Type” dialog box is displayed.
Select the CO that has a priority for registration. The CO registered here
will be valid for all devices.
When the type is decided, select the [Next] button.
Select the [Back] button to return to the previous dialog box.
Select the [Cancel] button for quitting.
Version 2.65 Jul. 2009
19
User's Manual
Installer, SetupPOS, TMUSB
(8) The “Select Components” dialog box is displayed.
Select the necessary components.
To go to the next dialog box, select the [Next] button.
Select the [Back] button for return to the previous dialog box.
Select the [Cancel] button for quitting.
(9) The “Select Program Folder” dialog box is displayed.
The previously decided folder name is displayed in “Program Folder”. If the
Registry File is specified, this information is referred from the Registry File.
Normally, default values should be used. The folder name can be changed,
or an existing folder can be selected, but if an existing folder is used,
Version 2.65 Jul. 2009
20
User's Manual
Installer, SetupPOS, TMUSB
please select it only after obtaining an understanding of the folder’s
attributes. If the OS being used is Windows 2000, Windows XP or
Windows Vista, the folder must have COMMON attributes.
To go to the next dialog box, select the [Next] button.
Select the [Back] button for return to the previous dialog box.
If the [Back] button is selected, the set folder name will be canceled.
Select the [Cancel] button for quitting.
(10) The “Start Copying Files” dialog box is displayed.
This dialog box shows the information that has already been set. Confirm
the contents and select the [Next] button.
Select the [Back] button for return to the previous dialog box.
Select the [Cancel] button for quitting.
Version 2.65 Jul. 2009
21
User's Manual
Installer, SetupPOS, TMUSB
(11) The “Port selection” dialog box is displayed.
Select the port.
When the Parallel port was selected, the Lilac parallel driver is installed.
When the USB port was selected, the TMUSB driver is installed.
Select the [Cancel] button for quitting.
(12) The “Setup Status” dialog box is displayed.
The progress is shown on the status bar.
The [Cancel] button works at this point, but do not press the [Cancel]
button unless there is a particular reason.
Operation after pressing the [Cancel] button is not guaranteed. If pressed,
Version 2.65 Jul. 2009
22
User's Manual
Installer, SetupPOS, TMUSB
be sure to perform a reinstallation.
At this point, all the information necessary for the version upgrade shall be
updated. It may take a few minutes for all the operations to be completed.
(13) When all the operations are completed, the “Setup Complete” dialog box is
displayed. Select in the check box whether or not to display the release
note on the installed EPSON OPOS ADK. It is strongly recommended to
read the notes.
(14) If system files are renewed because of the installation, rebooting of system
may be requested. In this case, please specify whether rebooting right
away or later, and execute the rebooting. If later rebooting is specified,
make sure to reboot after the completion of the installation. The operation
under the un-rebooted environment is not guaranteed at all.
(15) Installation is completed. The SetupPOS utility starts up. Confirm the
settings in accordance with the setup described in “Section 5. SetupPOS
Utility” of this manual. When system rebooting is executed, SetupPOS
utility does not start automatically. Please start SetupPOS utility from start
menu.
3.3.2.
Overwriting Installation
With the inst
allation of EPSON OPOS ADK in advance, install according to the
following procedure.
3.3.2.1. Overwriting Version 2.60 by Version 2.60
When performing an overwrite installation, user information, specified installation
destination, and specified program folder in the previous installation will remain
effective. This information cannot be changed. If a version of EPSON OPOS ADK
has been already installed, when you try to install the same version, Add-in
Installation starts. In this case, only the installed devices and files are overwritten.
This overwriting is not able to overwrite in Windows Vista environment.
<Installation Procedure>
(1) Run the SETUP.EXE program on disk 1.
Before running SETUP.EXE, close the other programs already running.
Otherwise, installation may fail. It takes some time for Setup to start. Wait
a while.
Version 2.65 Jul. 2009
23
User's Manual
Installer, SetupPOS, TMUSB
(2) The “Welcome” dialog box is displayed.
Select the arbitrary option and then select the [Next] button. After this
procedure is different depending on the select option. When the "Modify”
has been selected, the “Select CO Type” dialog box is displayed.
When the "Repair” has been selected, the “Setup Status” dialog box is
displayed. When the "Remove” has been selected, the confirmation
message to removing is displayed.
When the "Yes” has been selected, the uninstaller gets started.
When the "No” has been selected, this dialog is displayed again.
Select the [Cancel] button for quitting.
Version 2.65 Jul. 2009
24
User's Manual
Installer, SetupPOS, TMUSB
(3) The “Select CO Type” dialog box is displayed.
Select the CO that has a priority for registration.
When the type is decided, select the [Next] button.
Select the [Back] button to return to the previous dialog box.
Select the [Cancel] button for quitting.
(4) The “Select Components” dialog box is displayed.
After reviewing the components to add and remove, select the [Next]
button.
Select the [Back] button to return to the previous dialog box.
Select the [Cancel] button for quitting.
Version 2.65 Jul. 2009
25
User's Manual
Installer, SetupPOS, TMUSB
(5) The “Port selection” dialog box is displayed.
Select the method of connection used by device, select the [Next] button.
When the Parallel port is selected, the Lilac parallel driver is installed.
When the USB port is selected, the TMUSB driver is installed.
Select the [Back] button to return to the previous dialog box.
Select the [Cancel] button for quitting.
(6) The “Setup Status” dialog box is displayed.
The progress is shown on the status bar.
At this point, all the information necessary for the version upgrade shall be
Loading...