Page 1
User's Guide
Home Projector
Lifestudio GRAND
Lifestudio GRAND
EH-LS670B
EH-LS670W
Page 2
Contents
2
Notations Used in This Guide 5
Using the Manual to Search for Information.....................................7
Searching by Keyw
Jumping Directly from Bookmarks.....................................................................7
Printing Only the Pages You Need......................................................................7
ord......................................................................................7
Getting the Latest Version of the Documents................................... 8
Introduction to Your Projector 9
Projector Parts and Functions.......................................................... 10
Projector P
Projector Parts - Top/Side................................................................................11
Projector Parts - Rear.......................................................................................12
Projector Parts - Base...................................................................................... 13
Projector Parts - Remote Control......................................................................13
arts - Front/Side..............................................................................10
Setting Up the Projector 16
Projector Placement..........................................................................17
Projector S
Precautions on Installation..............................................................................19
Projector Connections.......................................................................20
Connecting to Video Sources...........................................................................20
Connecting to External USB Devices.................................................................20
Connecting to External Audio Devices..............................................................21
Connecting to an eARC/ARC Compatible AV System..........................................22
Connecting Headphones................................................................................ 22
etup and Installation Options.......................................................... 18
About Epson Projector Update.........................................................28
Installing Epson Projector Update....................................................................28
Using Basic Projector Features 29
Turning On the Projector.................................................................. 30
Turning O the P
Turning O the Projector (Deep Standby Mode)................................................31
Projection Modes...............................................................................32
Changing the Projection Mode Using the Menus...............................................32
Focusing the Image Using the Focus Lever......................................33
Correcting Distortion in the Image.................................................. 34
When Projecting on a Wall...............................................................................34
When Projecting on a Screen...........................................................................35
Adjusting Image Color...................................................................... 37
Adjusting the Size and Position of the Image................................. 38
Selecting an Image Source................................................................39
Image Aspect Ratio............................................................................40
Changing the Image Aspect Ratio....................................................................40
Available Image Aspect Ratios.........................................................................40
Adjusting Image Quality (Color Mode)............................................ 41
Changing the Color Mode............................................................................... 41
Available Color Modes.................................................................................... 41
Adjusting Image Quality in Detail....................................................42
rojector (Suspended Mode)................................. 31
Installing Batteries in the Remote Control...................................... 24
Remote Control Operation.............................................................................. 24
Setting Up the Projector OS..............................................................26
Projector's Home Screen................................................................................. 26
Turning On Automatic Luminance Adjustment.............................. 43
Adjusting the Light Source Brightness............................................ 44
Controlling the Volume with the Volume Buttons..........................45
Changing the Sound Mode............................................................... 46
Page 3
Contents
3
Available Sound Modes...................................................................................46
Adjusting Project
or Features 47
Using the Projector as a Bluetooth® Speaker.................................. 48
Shutting
O the Image Temporarily................................................ 49
Using Google Cast™............................................................................50
HDMI CEC Features............................................................................51
Operating Connected Devices Using the HDMI CEC Features............................. 51
Installing a Security Cable................................................................ 52
Updating Projector Firmware Using Epson Projector Update....... 53
Initializing the Projector................................................................... 54
Adjusting the Menu Settings 55
Using the Projector's Menus............................................................. 56
Projector F
Projector Feature Settings - Projector Menu...................................58
eature Settings - Channels & Inputs Menu....................57
Maintaining the Projector 63
Projector Maintenance......................................................................64
Cleaning the Projection W
indow......................................................65
Cleaning the Motion Sensor............................................................. 66
Cleaning the Projector Case..............................................................67
Air Filter and Air Intake Vent Maintenance..................................... 68
Cleaning the Air Filter .....................................................................................68
Replacing the Air Filter....................................................................................69
Cleaning the Air Intake Vents ..........................................................................70
Adjusting the Color Convergence (Panel Alignment).....................71
Solving Problems 73
Projection Problems..........................................................................74
Projector I
Solving Projector Power-On or Power-O Problems......................77
Solving Projector Power Problems....................................................................77
Solving Projector Shutdown Problems............................................................. 77
ndicator Status ................................................................ 75
Image Quality Settings - Display & Sound Menu............................ 59
Other Menus...................................................................................... 61
Network & Internet Menu................................................................................61
Accounts & Proles Menu................................................................................61
Privacy Menu................................................................................................. 61
Apps Menu.................................................................................................... 61
System Menu................................................................................................. 61
Accessibility Menu..........................................................................................61
Remotes & Accessories Menu.......................................................................... 62
Help & Feedback Menu...................................................................................62
Solving Image Problems................................................................... 78
Solving Missing Image Problems......................................................................78
Adjusting an Image that is not Rectangular.......................................................79
Adjusting a Fuzzy or Blurry Image....................................................................79
Fixing Partial Image Problems..........................................................................79
Adjusting an Image that Contains Noise or Static.............................................. 80
Adjusting an Image with Incorrect Brightness or Colors.....................................80
Solving Sound Problems...................................................................81
Solving Missing or Low Audio Problems...........................................................81
Solving Bluetooth Speaker Mode Problems...................................................... 81
Solving Remote Control Operation Problems.................................83
Page 4
Contents
Solving HDMI CEC Problems.............................................................84
4
Solving Wi-Fi Net
work Problems......................................................85
Solving Projector's OS Problems...................................................... 86
Appendix 87
Optional Accessories and Replacement Parts................................. 88
Screens..........................................................................................................88
ement Parts..........................................................................................88
Replac
Screen Size and Projection Distance................................................89
Supported Monitor Display Resolutions......................................... 90
Projector Specications.................................................................... 91
Connector Specications.................................................................................91
Bluetooth Specications................................................................................. 92
External Dimensions......................................................................... 93
List of Safety Symbols and Instructions...........................................94
Laser Safety Information.................................................................. 96
Laser Warning Labels......................................................................................96
Glossary.............................................................................................. 99
Notices..............................................................................................100
FCC Compliance Statement...........................................................................100
Indication of the manufacturer and the importer in accordance with requirements
of EU directive..............................................................................................101
Restriction of Use..........................................................................................101
Trademarks..................................................................................................101
Copyright Notice.......................................................................................... 101
Copyright Attribution....................................................................................102
Page 5
Notations Used in This Guide
Safety Sym
e projector and its manuals use graphical symbols and labels to indicate content that tells you how to use the projector safely.
Read and carefully follow the instructions that are marked with these symbols and labels to avoid injury to persons or damage to property.
bols
is symbol indicates information that, if ignored, could possibly result in personal injury or even death.
Warning
Caution
is symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
General Information Notations
Attention
button
Menu/Setting name Indicates projector menu and setting names.
is label indicates procedures that may result in damage or injury if sucient care is not taken.
is label indicates additional information that may be useful to know.
Indicates the buttons on the remote control or the control panel.
xample:
E
Example:
lect the Projector menu.
Se
s Projector > Keystone > Zoom & Shi
button
is label indicates links to the related pages.
s
Related Links
g
•
"Using the Manual to Search for Information" p.7
is lab
el indicates the projector's current menu level.
Page 6
•
"Getting t
he Latest Version of the Documents" p.8
Page 7
Using the Manual to Search for Information
e PDF manual allows you to search for information you are looking for by
ord, or jump directly to specic sections using the bookmarks. You can
keyw
also print only the pages you need. is section explains how to use a PDF
manual that has been opened in Adobe Reader X on your computer.
Related Links
g
•
"Searching by Keyword" p.7
•
"Jumping Directly from Bookmarks" p.7
•
"Printing Only the Pages You Need" p.7
7
Searching by Keyword
Click Edit > Advanced Search. Enter the keyword (text) for information you
want to nd in the search window, and then click Search. Hits are displayed as a
list. Click one of the displayed hits to jump to that page.
Jumping Directly from Bookmarks
Click a title to jump to that page. Click + or > to view the lower level titles in
that sec
your keyboard.
•
•
tion. To return to the previous page, perform the following operation on
Windows: Hold down Alt, and then press ←.
Mac OS: Hold down the command key, and then press ←.
Printing Only the Pages You Need
You can extract and print only the pages you need. Click Print in th
and then specify the pages you want to print in Pages in Pages to Print.
•
To specify a series of pages, enter a hyphen between the start page and the
end page.
Example: 20-25
•
To specify pages that are not in series, divide the pages with commas.
Example: 5, 10, 15
e File menu,
Page 8
Getting the Latest Version of the Documents
8
You can get the latest version of the manuals and specicat
website.
Visit epson.sn, and enter your model name.
ions on the Epson
Page 9
Introduction to Your Projector
See thes
g
•
e sections to learn more about your projector.
Related Links
"Projector Parts and Functions" p.10
Page 10
Projector Parts and Functions
10
e following sections explain the projector parts and their functions.
is pr
oduct may use sensors, such as a camera and a microphone. ese
sensors may collect information related to privacy (such as locations, sounds,
videos, or images).
Related Links
g
•
"Projector Parts - Front/Side" p.10
•
"Projector Parts - Top/Side" p.11
•
"Projector Parts - Rear" p.12
•
"Projector Parts - Base" p.13
•
"Projector Parts - Remote Control" p.13
Projector Parts - Front/Side
Name Function
Speaker Outputs audio.
C
Caution
Do not ho
cause it to deform.
Focus lever cover Open to access the focus lever.
D
Air lter cover Open to access the air lter.
E
Po
wer button Turns the projector on or o.
F
Statu
G
Relat
g
•
"Remo
•
"Turning On the Projector" p.30
•
"Focusing the Image Using the Focus Lever" p.33
•
"Air Filter and Air Intake Vent Maintenance" p.68
•
"Projector Indicator Status " p.75
s indicator Indicates the projector's status.
ed Links
t
e Control Operation" p.24
ld or hit this part as doing so may
Name Function
Front adjustable feet When set up on a surface such as a desk, turn to extend
A
Remote receiver Receives signals from the remote control.
B
o
r retract t
he feet to adjust the horizontal tilt.
Page 11
Projector Parts and Functions
11
Projector Parts - Top/Side
Name Function
Motion sensor Detects movement near the projection window and
A
reduces th
e brightness of the light source for safety.
Name Function
Projection window Images are projected from the lens inside the projector.
B
Warning
•
Do not loo
while projecting.
•
Do not place any objects or put your hand
near the projection window. It could cause
burns, re, or the object to warp because this
area reaches a high temperature due to the
concentrated projection light.
Security slot e security slot is compatible with the Microsaver
C
Air exhaust vent Exhaust vent for air used to cool the projector internally.
D
Secur
ity System manufactured by Kensington.
k into the projection window
Caution
While pro
near the air exhaust vent, and do not place
objects that may become warped or damaged
by heat near the vent. Hot air from the air
exhaust vent could cause burns, warping, or
accidents to occur.
jecting, do not put your face or hands
•
e detection range may vary
depending on the temperature of
the surroundings.
•
Movement may not be detected
through transparent material such
as glass.
Related Links
g
•
"Cleaning t
•
"Cleaning the Projection Window" p.65
•
"Installing a Security Cable" p.52
he Motion Sensor" p.66
Page 12
Projector Parts and Functions
12
Projector Parts - Rear
Name Function
Power inlet Connects the power cord to the projector.
A
Air intake vent Takes in air to cool the projector internally.
B
Service port is port is used by service technicians and should not
C
Optical Out port Outputs audio from the current input source to an
D
ally be used.
norm
external audio dev
audio cable.
ice by connecting an optical digital
Name Function
USB-A port Connects a commercially available USB device such as a
E
HDMI1 port
F
HDMI2 (eARC/ARC)
po
rt
HDMI3 port
Audio Out port Outputs audio from the current input source to
G
Related Links
g
•
"Conne
•
"Connecting to External USB Devices" p.20
•
"Connecting to External Audio Devices" p.21
•
"Connecting to an eARC/ARC Compatible AV System" p.22
•
"Connecting Headphones" p.22
cting to Video Sources" p.20
webcam, ext
Connects a commercially available RJ45 adapter to
enable wired LAN connections.
Inputs video signals from HDMI compatible video
equipment and computers. is projector is compatible
with HDCP 2.3.
e HDMI2 port is compatible with HDMI eARC and
ARC.
Each port supports the following refresh rate:
•
HDMI1/HDMI2 ports: 4K 120 Hz
•
HDMI3 port: 4K 60 Hz
headph
ernal HDD, or keyboard.
is port is not guaranteed to
operate f
USB.
ones.
or all devices that support
Page 13
Projector Parts and Functions
13
Projector Parts - Base
Name Function
Rear foot Stabilizes the projector on a surface such as a desk.
A
Projector Parts - Remote Control
Air intake vent (air
B
lter)
Front adjustable feet When set up on a surface such as a desk, turn to extend
C
Air intake vent Takes in air to cool the projector internally.
D
Related Links
g
•
"Cleaning t
he Air Intake Vents " p.70
Takes in air t
or retract t
o cool the projector internally.
he feet to adjust the horizontal tilt.
Page 14
Projector Parts and Functions
14
Name Function
Power button Turns the projector on or o.
A
role button
User P
B
rrow buttons
A
C
Esc button
D
Brightness buttons Lightens or darkens the projected image.
E
YouTube button
F
Displays the user pro
Selects items on the home screen to play online content.
Selects m
menu.
Stops the current function.
Moves back to the previous menu level while displaying
the projector's menu.
Starts the YouTube application.
enu items while displaying the projector's
le
.
Name Function
Netix button Starts the Netix application.
I
ector Settings
Proj
J
K
L
M
N
n
butto
Volume up/down
butto
ns
Home button
HDMI button Switches to the last HDMI source you displayed.
[Enter] button
Displays the Projec
Adjusts the volume for the speaker and headphones.
Displays the home screen.
Enters the current selection and moves to the next level
while disp
laying the projector's menu.
tor menu.
Prime Video button Starts the Amazon Prime Video application.
G
Live TV button Starts the Live TV application.
H
Live TV is not available in certain
languages an
of services varies by country and
language.
d countries. Availability
Settings button
O
Opens the dashboard.
Page 15
Projector Parts and Functions
Name Function
15
Google Assistant
P
Q
R
S
Related Links
g
•
"Remot
•
"Installing Batteries in the Remote Control" p.24
•
"Turning On the Projector" p.30
•
"Turning O the Projector (Suspended Mode)" p.31
•
"Projector's Home Screen" p.26
•
"Adjusting the Light Source Brightness" p.44
•
"Controlling the Volume with the Volume Buttons" p.45
•
"Projector's Home Screen" p.26
•
"Selecting an Image Source" p.39
•
"Using the Projector's Menus" p.56
n
butto
Source Search button Displays a list of available input sources.
Indicator/Microphone Turns on when outputting signals from the remote
Remote control light
emitting ar
ea
e Control Operation" p.24
Press the Google Assistant button on the remote, and
say, "Hey G
control.
Detects your voice when you press the Google Assistant
button.
Outputs remote control signals.
oogle" to get started.
Google Assistant is not available
in certain langu
Availability of services varies by
country and language.
ages and countries.
Page 16
Setting Up the Projector
Follow t
g
•
•
•
•
•
he instructions in these sections to set up your projector.
Related Links
"Projector Placement" p.17
"Projector Connections" p.20
"Installing Batteries in the Remote Control" p.24
"Setting Up the Projector OS" p.26
"About Epson Projector Update" p.28
Page 17
Projector Placement
Install the projector on a table in your living room or on a low shelf to project
images.
Note the following points when selecting a projector location:
•
Place the p
rojector on a sturdy and level surface.
•
Leave plen
not place it on top of or next to anything that could block the vents.
•
Place the projector so it squarely faces the screen, not at an angle.
ty of space around and under the projector for ventilation, and do
17
•
If the imag
e is tilted, rotate the front feet to adjust their height.
If you cannot install the projector squarely facing the screen, correct
any resul
best quality images, we recommend adjusting the installation position
of the projector to achieve the correct image size and shape.
ting keystone distortion using the projector controls. For the
Page 18
Projector Placement
18
Warning
Do not ins
or in a location subject to smoke or steam. Otherwise, it could cause a re or electric
shock to occur.
tall the projector in a location subject to high levels of dust or humidity,
Warning
•
Do not cov
covered, the internal temperature could rise and cause a re.
•
Do not use or store the projector in locations where it will be subject to dust or
dirt. Otherwise, the quality of the projected image may decline, or the air lter
may become clogged, resulting in a malfunction or re.
•
Do not install the projector on an unstable surface or in a location beyond the
weight specications of the projector. Otherwise, it could fall or topple causing an
accident and injury.
•
Do not install in locations where salt damage could occur, or in locations subject
to corrosive gas such as sulphuric gas from hot springs. Otherwise, corrosion
could cause the projector to fall. It could also cause the projector to malfunction.
Attention
•
Make sure y
•
Do not operate the projector on its side.
•
Do not project images straight up or straight down.
•
Do not tilt the projector right or le.
•
If you are using the projector at altitudes above 1,500 m, set the High Altitude
Mode setting to On in the projector's menu to ensure the projector's internal
temperature is regulated properly.
s Projector > Advanced Settings > High Altitude Mode
er the projector's air intake or air exhaust vents. If the vents are
ou do not operate the projector in the following positions.
Projector Setup and Installation Options
You can set up or install your projector in the following ways:
Front/R
g
•
ear
e default Projection setting is Front.
Related Links
"Chang
ing the Projection Mode Using the Menus" p.32
Related Links
g
•
"Proj
ector Setup and Installation Options" p.18
•
"Precautions on Installation" p.19
Page 19
Projector Placement
Precautions on Installation
Installation space
Attention
Be sure to le
block the air exhaust and intake vents.
ave the following amount of space around the projector so as not to
19
A
B
10 cm
30 cm
Page 20
Projector Connections
20
See these sections to connect the projector to a variety of projection sources.
Attention
Check t
Do not force a connector into a port if it does not t. e device or your projector
could be damaged or could malfunction.
g
•
•
•
•
•
he shape and orientation of the connectors on any cable you plan to connect.
Related Links
"Conne
"Connecting to External USB Devices" p.20
"Connecting to External Audio Devices" p.21
"Connecting to an eARC/ARC Compatible AV System" p.22
"Connecting Headphones" p.22
cting to Video Sources" p.20
Connecting to Video Sources
If your video source has an HDMI port, you can connect it to the projector
using an HDMI cab
image.
le and send the image source's audio with the projected
•
If the po
cable supplied with the device or an optional cable to connect to the
projector.
•
Some video devices are capable of outputting dierent types of signals.
See your video device manual to conrm what type of signals can be
output.
•
When sending 18 Gbps images such as 4K 60 Hz 4:4:4, use an HDMI
cable (premium-high speed). If you use an incompatible cable, images
may not be displayed correctly.
•
When connecting a gaming console, we recommend connecting it to
a port that supports the refresh rate of 120 Hz (HDMI1 or HDMI2).
See the Supplemental A/V Support Specication for detailed information
on compatible refresh rates and resolutions for each compatible video
display format.
Connect the HDMI cable to your video source's HDMI output port.
a
Connect the other end to the projector's HDMI port.
b
rt on the device you connect has an unusual shape, use the
Attention
Do not turn on the video source before connecting it to the projector. Doing so could
damage the projector.
Connecting to External USB Devices
By connecting any of these devices to your projector, you can project images
and other co
•
Microphone
ntent or play audio without using a video device.
Page 21
Projector Connections
21
•
USB ash dr
•
Digital camera
•
USB hard drive
If your USB device came with a power adapter, plug the device into an
a
electr
Connect the USB device to the projector's USB-A port as shown.
b
ive
•
e USB-A port i
USB.
•
You may need an app to project content from your USB device.
•
USB hard drives must meet these requirements:
•
USB Mass Storage Class-compliant (not all USB Mass Storage Class
devices are supported)
•
Formatted in FAT16/32
•
Self-powered by their own AC power supplies (bus-powered hard
drives are not recommended)
•
Avoid using hard drives with multiple partitions
ical outlet.
s not guaranteed to operate all devices that support
Attention
•
Use the US
•
If the USB cable is too long, the device may not operate correctly. We
recommend using a USB cable that is three meters or less.
•
If you use a USB hub, the device may not operate correctly. We recommend
checking the operation in advance.
Connect the other end to your device, if necessary.
c
Connecting to Ext
If your amplier or speaker has an optical digital audio input port, you can
connec
from the image source.
a
b
t it to the projector using an optical digital audio cable and project audio
Connect the optical digital audio cable to your audio device's optical
digital audio inp
Connect the other end to the projector's Optical Out port.
B cable supplied with or specied for use with the device.
ernal Audio Devices
ut port.
Page 22
Projector Connections
22
If you set Audio Output Device to SPDIF in the projector's menu, audio
is onl
y output from the external audio device and is not output from the
projector's speakers.
s Display & Sound > Audio Output > Audio Output Device
Related Links
g
•
"Image Q
uality Settings - Display & Sound Menu" p.59
Connecting to an eARC/ARC Compatible AV System
If your AV system or speakers, such as a sound bar, has an HDMI port, you can
connect t
audio to these devices.
a
b
hem to the projector using an HDMI cable (with Ethernet) to output
Connect the HDMI cable to your AV system's HDMI output port (eARC
o
C comp
r AR
Connect the other end to the projector's HDMI2 (eARC/ARC) port.
atible).
Make any necessary settings on the connected AV system. See your
c
device's docum
•
To outp
using an ARC connection, set Global CEC control to On in the
projector's menu.
s Channels & Inputs > Inputs > Global CEC control
•
If audio is not output properly, try changing Auto to PCM as the
Digital Output setting in the projector's menu.
s Display & Sound > Audio Output > Digital Output
•
See the Supplemental A/V Support Specication for eARC/ARC audio
supported formats.
Relat
g
•
•
ed Links
j
ector Feature Settings - Channels & Inputs Menu" p.57
"Pro
"Image Quality Settings - Display & Sound Menu" p.59
entation for more information.
ut audio from the projector's HDMI2 (eARC/ARC) port when
Connecting Headphones
You can connect headphones to the projector's Audio Out port. You can control
ume using the projector's remote control.
the vol
Attention
e proje
headphones, audio may not be output normally.
ctor's Audio Out port only supports 3-pin headphones. If you use any other
Page 23
Projector Connections
Connect the stereo headphone's mini-jack cable to the projector's Audio
a
Out por
Caution
Do not st
hearing loss.
Always lower the volume before powering o, so that you can power on and then
gradually increase the volume.
t.
art a playback at a high volume setting. Sudden loud noises may cause
23
Page 24
Installing Batteries in the Remote Control
24
e remote control uses the two AAA batteries that came with the projector.
Attention
Make sure y
a
b
ou read the Safety Instructions before handling the batteries.
Remove the battery cover as shown.
Remove the old batteries, if necessary.
Dispose of used batteries according to local regulations.
Warning
Check t
ensure the batteries are inserted the correct way. If the batteries are not used
correctly, they could explode or leak causing a re, injury, or damage to the
product.
Replace the battery cover and press it down until it clicks into place.
d
Related Links
g
•
"Remot
he positions of the (+) and (–) marks inside the battery holder to
e Control Operation" p.24
Remote Control Operation
Insert the batteries with the + and –
c
d
s facing as shown.
en
e remote control lets you control the projector from almost anywhere in the
room.
t is recommended that you aim the remote control at the projector's receivers
I
within the distance and angles listed here.
Page 25
Installing Batteries in the Remote Control
e projector may not respond to commands if you use the remote control
in condit
not going to use the remote control for a long time, remove the batteries.
ions with bright uorescent lights or in direct sunlight. If you are
25
Page 26
Setting Up the Projector OS
26
When you turn on the projector for the rst tim
projector's OS using the initial setup wizard.
You can change each of the settings even aer completin
Turn on the projector.
a
When the pairing screen is displayed, hold down the button and
b
button on the remote control at the same time to pair the remote control
and the projector.
•
When pairin
projector.
•
When pairing starts, the indicator on the remote control ashes.
When pairing is complete, the indicator turns o.
•
You cannot pair multiple remote controls with the projector at
the same time. Pairing a new remote control will unpair the
existing one. Make sure the intended remote control is paired.
g, place the remote control within one meter of the
e, you need to set up the
g the initial setup.
When the setting screen is displayed, follow the on-screen instructions to
d
make the ini
When the Wi-Fi setting screen is displayed, select the wireless network
e
y
ou want to u
necessary settings.
•
An Internet connection is required to view online content. Make sure
you can use the Wi-Fi service.
•
e customer is responsible are responsible for any communication
charges incurred when downloading the app or watching online
content.
Follow the on-screen instructions to make other necessary settings.
f
When you agree to the Epson license terms, the initial setup wizard closes.
g
W
g
•
ou have nished the initial setup, the home screen is displayed.
hen y
Related Links
"Projector's Home Screen" p.26
tial settings for the projector's OS.
•
We recomm
more detailed settings.
•
For instructions on how to create a Google Account, contact
Google or see the following website.
Google Account Help
se, and then follow the on-screen instructions to make
end logging in with your Google Account to make
When the language selection screen is displayed, select the language you
c
want to use, and then follow the on-screen instructions to select your
country or region.
Projector's Home Screen
When you turn on the projector or press the button on the remote control,
the hom
e screen is displayed.
Page 27
Setting Up the Projector OS
You can easily access recommended online content and applications from the
home scr
A
een.
Description
Displays the dashboard menu.
27
Searches for online content.
B
Displays the online content recommended by the applications.
C
Displays the applications downloaded on the projector.
D
e content of the home screen may change depending on the version of
the pr
ojector's OS.
Page 28
Epson Projector Update
About Epson Projector Update
28
e Epson Projector Update app allows you to check the projector rmware and
e it to the latest version. is is necessary to keep the projector up to date.
updat
Install the app, launch the app, and check for the latest rmware.
e Epson Projector Update app is automatically installed by the
proj
ector's initial setting wizard. To install it automatically, make sure you
log in with your Google Account, make the necessary Wi-Fi settings, and
connect the projector to the Internet.
Related Links
g
•
"Inst
alling Epson Projector Update" p.28
Installing Epson Projector Update
Follow the steps below to manually install the Epson Projector Update app.
a
Select the A
eld.
pps icon at the top of the home screen and select the search
Search for "Epson Projector Update" to install it on the projector.
b
Start the Epson Projector Update app and co
c
rmware is installed on the projector.
Related Links
g
•
"Updating Projector Firmware Using Epson Projector Update" p.53
nrm th
e latest projector
Page 29
Using Basic Projector Features
Follow t
g
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
he instructions in these sections to use your projector's basic features.
Related Links
"Turning On the Projector" p.30
"Turning O the Projector (Suspended Mode)" p.31
"Projection Modes" p.32
"Focusing the Image Using the Focus Lever" p.33
"Correcting Distortion in the Image" p.34
"Adjusting Image Color" p.37
"Adjusting the Size and Position of the Image" p.38
"Selecting an Image Source" p.39
"Image Aspect Ratio" p.40
"Adjusting Image Quality (Color Mode)" p.41
"Adjusting Image Quality in Detail" p.42
"Turning On Automatic Luminance Adjustment" p.43
"Adjusting the Light Source Brightness" p.44
"Controlling the Volume with the Volume Buttons" p.45
"Changing the Sound Mode" p.46
Page 30
Turning On the Projector
30
When you connect the video equipment to the projector, turn on the video
equipm
a
b
ent you want to use aer you turn on the projector.
Connect the power cord to the projector's power inlet and plug it into an
electr
ical outlet.
e projector enters standby mode. is indicates that the projector is
ing power, but is not yet turned on.
receiv
Press the power button on the projector or remote control to turn on the
proje
ctor.
e status indicator turns white.
e rst time you turn on the projector, the remote control pairing screen
and initial setup screen are displayed. Follow the on-screen instructions to
complete the settings.
Warning
•
Never loo
your eyes and is especially dangerous for children.
•
When turning on the projector at a distance using the remote control, make sure
there is no one looking into the lens.
•
During projection, do not block the light from the projector with a book or other
objects. If the light from the projector is blocked, the area on which the light
shines becomes hot which could cause it to melt, burn, or start a re. Also, the
lens may get hot due to the reected light which could cause the projector to
malfunction. To stop projection, turn o the projector.
Related Links
g
•
"Settin
•
"Projector Feature Settings - Projector Menu" p.58
k into the projector lens when the light source is on. is can damage
When using at an altitude of 1,500 m or more, set High Altit
On.
s Projector > Advanced Settings > High Altitude Mode
g Up the Projector OS" p.26
ude Mode to
Page 31
Turning O the Projector (Suspended Mode)
31
Turn o the projector aer use.
Turn o this product when it is not in use to prolong the life of
the pr
ojector. Light source life varies depending on the environmental
conditions and usage. Brightness decreases over time.
Press the power button on the projector or remote control.
a
e light sour
enters suspended mode.
To transport or store the projector, make sure the status indicator on the
b
proje
ctor is o, and then unplug the power cord.
Related Links
g
•
"Turning O the Projector (Deep Standby Mode)" p.31
ce turns o, and the status indicator turns o. e projector
Turning O the Projector (Deep Standby Mode)
To reduce power consumption when the projector is not in use, turn o the
p
rojector completely using the remote control.
To transport or store the projector, make sure the status indicator on the
c
p
ctor is o, and then unplug the power cord.
roje
•
In deep stan
suspended mode.
•
It takes longer for the projector to start up the next time you turn it on
than when it is in suspended mode.
Hold down the power button on the remote control.
a
Select O
b
e light s
enters deep standby mode, reducing power consumption.
K on the shutdown conrmation screen.
ource turns o, and the status indicator turns o. e projector
dby mode, the projector consumes less power than in
Page 32
Projection Modes
Depending on how you positioned the projector, you may need to change the
ction mode so your images project correctly.
proje
•
Front lets you project from in front of the screen.
•
Rear ips the image horizontally to project from behind a translucent screen.
Related Links
g
•
"Changing the Projection Mode Using the Menus" p.32
•
"Projector Setup and Installation Options" p.18
Changing the Projection Mode Using the Menus
You can change the projection mode to ip the image from le-to-right using
the projector menus.
Turn on the projector and display an image.
a
32
Press the
b
Select the menus in the following order:
c
s Advanced Settin
Select a projection mode and press [Enter].
d
Press
e
button on the remote control to open the Projec
gs > Projection
to exit the menus.
tor menu.
Page 33
Focusing the Image Using the Focus Lever
33
You can correct the focus using the focus lever.
Turn on the projector and display an image.
a
Open the focus lever cover.
b
Move the focus lever to adjust the focus.
c
Close the focus lever cover.
d
Page 34
Correcting Distortion in the Image
34
When the projected image is curved or not rectangular, you can correct
tion in the projected image by following the on-screen instructions.
distor
Aer correction, your image is slightly smaller.
Turn on the projector and display an image.
a
Press the
b
Select Keystone.
c
Selec
d
e fol
t Remote control.
button on the remote control to open the Projec
lowing screen is displayed.
tor menu.
ollow the on-screen instructions to correct distortion in the image.
F
f
Press
g
Related Links
g
•
"When Projecting on a Wall" p.34
•
"When Projecting on a Screen" p.35
to exit the menus.
For details on the options for correcting distortion, see the following
ns.
sectio
When Projecting on a Wall
When you are projecting images on a wall, select Wall and f
below.
When selecting the correction method, if the message Reset all dist
corrections for the projected image? is displayed, select Yes.
ollow the steps
ortion
To correct distortion more easily, you can use the Epson Setting
ant app on a smartphone or tablet that has a camera function.
Assist
Select App and scan the QR code displayed on the projected
screen to install the app. e customer is responsible for any
communication charges incurred when downloading the app.
Select Wall or Projector screen according to the projection surface you are
e
using.
Page 35
Correcting Distortion in the Image
35
Select the shape of the projected image from the screen.
a
•
Edges of the image ar
e four-point correction screen is displayed. Select the points you
want to correct and correct the distortion.
•
Edges of the image are distorted:
Go to step 2 to select how the projected image is distorted.
e straight but not rectangular:
•
Top or bo
e eleven-point correction screen (top line with nine points, bottom
line with two points) is displayed. Select the points you want to correct
and correct the distortion.
•
Whole image is curved:
e eight-point correction screen is displayed. Select the points you
want to correct and correct the distortion.
•
Detailed adjustments aer app correction:
e point correction screen (33 × 33 points vertically and horizontally)
is displayed. Select the points you want to correct and correct the
distortion.
When you nish
c
ttom is not straight:
r
recting the distortion, select Finish.
co
When Projecting on a Screen
When you are projecting images on the projector screen, select Projec
and follow the steps below.
tor screen
Select which part of the projected image is distorted on the screen.
b
When selecting the correction method, if the message Reset all dist
corrections for the projected image? is displayed, select Yes.
ortion
Page 36
Correcting Distortion in the Image
Move the projector following the on-screen instructions.
a
36
Select N
b
e fo
Select the points you want to correct and correct the distortion.
c
If necessary, correct the distortion using the eight-point correction screen
d
t
hat is dis
When you nish cor
e
ext.
ur
-point correction screen is displayed.
played when you select Corner Adjustment on the screen.
recting the distortion, select Finish.
Page 37
Adjusting Image Color
37
You can use the preset color correction to adjust the color of the projected image
so that it m
a
b
c
atches the color of the projection surface (wall or projector screen).
You can make further detailed color adjustments using the projector's
Display & So
Turn on the projector and display an image.
Press the button on the remote control to open the Projec
Select Keystone.
e fol
lowing screen is displayed.
und menu.
tor menu.
Selec
e
f
Related Links
g
•
"Image Q
t the color that is closest to the color of the projection surface and
select OK.
Press to exit the menus.
uality Settings - Display & Sound Menu" p.59
Select Adjust color.
d
Page 38
Adjusting the Size and Position of the Image
38
You can use the Zoom & S
projected image.
Turn on the projector and display an image.
a
Press the
b
Select Zoom & Shi.
c
e zoom ad
button on the remote control to open the Projec
justment screen is displayed.
hi feature to adjust the size and position of the
tor menu.
Use the arrow buttons to adjust the image position.
f
Press to exit the menus.
g
Related Links
g
•
"Proj
ector Feature Settings - Projector Menu" p.58
Use the le and right ar
d
Press the [Enter] button.
e
e screen swi
displayed.
row buttons to adjust the image size.
tches to Shi mode and the shi adjustment screen is
Page 39
Selecting an Image Source
When multiple image sources are connected to the projector, such as a
comput
a
b
er and DVD player, you can switch from one image source to the other.
Make sure the connected image source you want to use is turned on.
For video image sources, insert a DVD or other video media and press
p
lay.
39
ess the
Pr
c
Press the up or down arrow button to select the image source you want.
d
button on the remote control.
When no image signal is detected, check the cable connections
between t
he projector and the image source.
Page 40
Image Aspect Ratio
40
e projector can display images in dierent width-to-height ratios called
t ratios. Normally, the input signal from your video source determines
aspec
the image's aspect ratio. However, you can change the aspect ratio for certain
images to t your screen.
If you always want to use a particular aspect ratio for a certain video input
source, you can select it using the projector's Screen menu.
You can select this setting only when the current input source is HDMI.
Related Links
g
•
"Chang
•
"Available Image Aspect Ratios" p.40
ing the Image Aspect Ratio" p.40
Changing the Image Aspect Ratio
You can change the aspect ratio of the displayed image.
Turn on the projector and display an image.
a
Available Image Aspect Ratios
You can select the following image aspect ratios.
Note that using the aspect ratio function of the projector to reduce,
, or split the projected image for commercial purposes or for public
enlarge
viewing may infringe upon the rights of the copyright holder of that image
based on copyright law.
Aspect mode Description
Super Zoom Zooms into images. e right, le,
edges are missing.
4:3 Scales images to 4:3.
Movie expand 14:9 Scales images to 14:9.
Movie expand 16:9 Scales images to 16:9.
Full Displays images using the full size of the projection
area.
Uns
caled Displays images as they are.
top, and bottom
Press the button on the remote control to open the dashboard.
b
Select
c
Select the menus in the following order:
d
s Display & So
Select one of the available aspect ratios for your input signal.
e
Press
f
on the dashboard.
und > Screen
to exit the menus.
Page 41
Adjusting Image Quality (Color Mode)
41
e projector oers dierent color modes to provide optimum brightness,
contras
You can select the mode designed to match your image and environment, or
experiment with the available modes.
g
•
•
t, and color for a variety of viewing environments and image types.
Related Links
"Changing the Color Mode" p.41
"Available Color Modes" p.41
Changing the Color Mode
You can change the projector's color mode to optimize the image for your
viewing environment.
Turn on the projector and display an image.
a
Press the button on the remote control to open the dashboard.
b
c
Select
on the dashboard.
Color mode Description
Dynamic is is the brightest mode. Best for prioritizing
tness.
brigh
Standard is is a standard mode that balances brightness
and color s
recommended.
Cinema Best for enjoying content such as movies.
Natural Reproduces natural colors. is is th
you want to adjust the image color.
aturation. Standard mode is generally
e best option when
Select the menus in the following order:
d
s Display & So
Select the color mode you want to use from the list.
e
Press
f
Available C
You can set the projector to use these color modes, depending on your
environment and image types.
to exit the menus.
olor M
und > Display > Picture Mode
des
o
Page 42
Adjusting Image Quality in Detail
e projector's Display menu provides several options for adjusting the quality
of your im
tune various aspects of how quality and colors are displayed in your projected
images.
s Display & Sound > Display
See "Display & Sound Menu" for details on adjusting the image quality.
Related Links
g
•
"Image Quality Settings - Display & Sound Menu" p.59
age based on the input source you are currently using. You can ne-
42
Page 43
Turning On Automatic Luminance Adjustment
43
You can turn on Dynamic Co
luminance. is improves the image contrast based on the brightness of the
content you project.
Turn on the projector and display an image.
a
Press the
b
Select on the dashboard.
c
Select the menus in the following order:
d
s Dis
Select one of the following options:
e
•
O if you do not wan
•
Normal for standard brightness adjustment.
•
High Speed to adjust brightness as soon as the scene changes.
Press
f
button on the remote control to open the dashboard.
play & So
to exit the menus.
und > Display > Advanced Settings > Dynamic Contrast
ntrast to automatically optimize the image
t to adjust the brightness.
Related Links
g
•
"Image Q
uality Settings - Display & Sound Menu" p.59
Page 44
Adjusting the Light Source Brightness
You can adjust the brightness of your projector's light source.
Turn on the projector and display an image.
a
Press the up/down buttons on the remote control.
b
e Light Ou
tput adjustment gauge is displayed.
44
Press the
c
Press to exit the menus.
d
up/down buttons to adjust the brightness.
Page 45
Controlling the Volume with the Volume Buttons
e volume buttons control the projector's internal speaker system.
You can al
projector.
You must adjust the volume separately for each connected input source.
a
b
Do not st
hearing loss.
Always lower the volume before powering o, so that you can power on and then
gradually increase the volume.
so control the volume of any external speakers you connected to the
To adjust the volume for the connected audio/video system, set the Global
CEC con
s Channels & Inputs > Inputs > Global CEC control
Turn on the projector and start a video.
To lower or raise the volume, press the up/down buttons on the
remote co
A volume gauge appears on the screen.
trol setting to On in the projector's menu.
ntrol.
Caution
art a playback at a high volume setting. Sudden loud noises may cause
45
g
•
ed Links
Relat
"Pro
ector Feature Settings - Channels & Inputs Menu" p.57
j
Page 46
Changing the Sound Mode
46
e projector oers dierent sound modes to provide optimum sound for a
variety of im
You can select the mode designed to match your image, or experiment with the
available modes.
Turn on the projector and start a video.
a
Press the
b
Select on the dashboard.
c
Select the menus in the following order:
d
s Dis
Select your sound mode.
e
Press
f
Related Links
g
•
"Availab
age types.
button on the remote control to open the dashboard.
play & So
to exit the menus.
le Sound Modes" p.46
und > Sound > Sound Mode
Sound mode Description
Standard Outputs the audio using normal sound quality.
Available Sound Modes
You can set the projector to use these sound modes, depending on the input
source yo
Sound mode Description
Cinema Best for audio from videos or movies. Low and high
Dialogue Best for hearing voices and spoken lines.
Music Best for music. Low and high pitch sounds are clearer.
u are using:
p
ounds are emphasized.
itch s
Page 47
Adjusting Projector Features
Follow t
g
•
•
•
•
•
•
•
he instructions in these sections to use your projector's adjustment features.
Related Links
"Using the Projector as a Bluetooth® Speaker" p.48
"Shutting O the Image Temporarily" p.49
"Using Google Cast™" p.50
"HDMI CEC Features" p.51
"Installing a Security Cable" p.52
"Updating Projector Firmware Using Epson Projector Update" p.53
"Initializing the Projector" p.54
Page 48
Using the Projector as a Bluetooth® Speaker
48
You can use the projector's speaker to output audio from a video/audio device
connect
a
b
c
d
ed by Bluetooth.
Turn on the projector and display an image.
Press the button on the remote control to open the Projec
Select Bluetooth Speaker Mode.
e Bl
uetooth Speaker Mode screen is displayed.
Enable the Bluetooth function on the device you want to connect and
select t
the documentation supplied with the device for more information.
he projector name (this projector) from the available device list. See
tor menu.
Related Links
g
•
"Blueto
oth Specications" p.92
•
ere is a del
•
You cannot connect multiple video/audio devices by Bluetooth at the
same time.
•
You can also connect the projector to Bluetooth audio devices, such
as speakers or headphones, to output the projector's audio from these
devices. Select the menus in the following order to perform pairing
from the menu displayed.
s Remotes & Accessories > Pair Accessory
•
Bluetooth audio devices are not supported in some countries and
regions.
ay in the audio output from any Bluetooth audio device.
•
You can ch
projector's Device name menu.
s System > About > Device name
•
To cancel a Bluetooth connection, disconnect from the
connected device.
e projected image turns o 10 seconds aer the Bluetooth connection is
shed.
establi
To exit Bluetooth Speaker Mode, press the
e
eck and change the projector name from the
button.
Page 49
Shutting O the Image Temporarily
49
You can temporarily turn o the p
Press the
a
Select on the dashboard.
b
Select the menus in the following order:
c
s Display & So
Select Picture o to turn o the projected image.
d
To turn t
e
Related Links
g
•
"Image Q
uality Settings - Display & Sound Menu" p.59
button on the remote control to open the dashboard.
und > Display > Advanced Settings
he image back on, press
rojected image.
.
Page 50
Using Google Cast
With Google Cast, you can stream entertainment from your favorite apps on
your pho
a
ne, tablet or laptop to Epson projectors.
Connect your device or computer to the same wireless network as the
proje
ctor.
™
50
Open the Google Cast-enabled app and press
b
Select your projector from the list of devices.
c
You can check and change the projector name from the projector's
Device name
s System > About > Device name
e app connects and starts casting to the projector.
To sto
d
p casting, press
menu.
in the app and choose the disconnect option.
.
Page 51
HDMI CEC Features
When an audio/video source that meets the HDMI CEC standard is connected
to the pr
control certain features of the linked device.
ojector's HDMI port, you can use the projector's remote control to
•
To automatically turn on the projector when you turn on the connected
device, set Allow connected devices to turn on TV to on.
51
Related Links
g
•
"Operating Connected Devices Using the HDMI CEC Features" p.51
Operating Connected Devices Using the HDMI CEC Features
You can control connected audio/video devices using the HDMI CEC features.
•
You mus
supplied with the device for more information.
•
Some connected devices or functions of those devices may not
operate properly even if they meet the HDMI CEC standard. See the
documentation supplied with the device for more information.
•
Use a cable that supports the HDMI standard.
Press the button on the remote control to open the dashboard.
a
Select
b
t also congure the connected device. See the documentation
on the dashboard.
Press
f
You can us
playback, stop, or adjust the volume.
Related Links
g
•
"Projector Feature Settings - Channels & Inputs Menu" p.57
to exit the menus.
e the projector's remote control to control the linked device such as
Select the menus in the following order:
c
s Channels & Inputs > Inputs > Global CEC control
Set Global CEC control to on.
d
Adju
e
st the following HDMI CEC settings as necessary.
•
To autom
projector, set Allow TV to turn o connected devices to on.
atically turn o the connected device when you turn o the
Page 52
Installing a Security Cable
You can use the security slot on the projector to attach a Kensington Microsaver
ty system as a the deterrent.
Securi
For more details on the Microsaver Security System, see http://
ww
w.kensington.com/.
Related Links
g
•
ector Parts - Top/Side" p.11
"Proj
52
Page 53
XXXX XXXX Apps XXXX Google TV
Your apps
Updating Projector Firmware Using Epson Projector Update
53
You can get the latest version of the projector rmware b
Update.
•
If the Eps
home screen. Be sure to install the app to keep the projector up to date.
•
When the latest projector rmware is available, a notication
is automatically displayed on the screen. Follow the on-screen
instructions to update the rmware.
•
If there is not enough space in the internal storage, the update may
fail. Free up space by deleting unnecessary apps and caches, then try
updating again.
Press the button on the remote control.
a
b
Select A
ap
pps and start Epson Projector Update by selecting it from the
ps list.
on Projector Update app is not installed, install it from the
y using Epson Projector
Follow the on-screen instructions to update the rmware.
c
Attention
While upd
Related Links
g
•
"Inst
alling Epson Projector Update" p.28
ating the rmware, do not operate or turn o the projector.
Page 54
Initializing the Projector
You can reset all of the projector settings to their default values.
If you initialize the projector, all the information such as installed apps,
Google Acco
are deleted. Write down the settings you do not want to lose before
performing initialization.
Turn on the projector and display an image.
a
Press the button on the remote control to open the dashboard.
b
unt login information, and the projector's menu settings
54
Select
c
Select the menus in the following order:
d
s Syste
Follow the on-screen instructions to start initializing the projector.
e
Related Links
g
•
"System M
on the dashboard.
m > About > Reset > Factory reset
enu" p.61
Page 55
Adjusting the Menu Settings
Follow t
g
•
•
•
•
•
he instructions in these sections to access the projector menu system and change projector settings.
Related Links
"Using the Projector's Menus" p.56
"Projector Feature Settings - Channels & Inputs Menu" p.57
"Projector Feature Settings - Projector Menu" p.58
"Image Quality Settings - Display & Sound Menu" p.59
"Other Menus" p.61
Page 56
Using the Projector's Menus
You can use the projector's menus to adjust the settings that control how your
ctor works. e projector displays the menus on the screen.
proje
56
Press the
a
Select on the dashboard.
b
Press the up or down arrow buttons to move through the menus listed on
c
the scre
To change settings in the displayed menu, press the [Enter] button.
d
Press the arrow buttons to move through the settings.
e
Change the settings using the buttons as necessary.
f
When you ni
g
Press to exit the menus.
h
button on the remote control to open the dashboard.
en.
sh ch
anging settings on a menu, press
.
Page 57
Projector Feature Settings - Channels & Inputs Menu
Settings on the Channels & Inp
uts menu let you control the audio/video device
you are currently using.
Setting Options Description
Inputs Switch input Switches the input source between Home
and HD
MI.
g
•
Related Links
"Operatin
g Connected Devices Using the HDMI CEC Features" p.51
57
HDMI1
HDMI2
HDMI3
Global CEC control Select On to control the connected audio/
Allow TV to
turn o
devices
connected
Show this in
show HDMI1/HDMI2/HDMI3 in the list
of input sources.
PIN lock: When enabling this setting, the
PIN code of the device that is connected
to the projector's HDMI port is required
when you switch the input source to
HDMI.
Edit names: Selects a name you want to
display as the name of the audio/video
device that is connected to the projector's
HDMI port.
No signal standby timeout: Sets the time
before the projector enters standby mode
when no signal is detected from the
HDMI source.
HDMI EDID Version: Displays the EDID
version.
video dev
control.
Select On to automatically turn o the
connected audio/video device when you
turn o the projector.
put: Species whether to
ice using the projector's remote
Allow connected
devices to tur
TV
n on
Select On to automatically turn on
the projector when you turn on the
connected device, or when you start
playback on the connected device.
Page 58
Projector Feature Settings - Projector Menu
Settings on the Projec
your image.
Setting Options Description
Keystone — Provides on-screen instructions for
tor menu provide correction methods to properly project
ting distortion in the projected
correc
image.
You can select the correction method by
using the Epson Setting Assist app or by
using the remote control.
Related Links
g
•
•
•
•
ecting Distortion in the Image" p.34
"Corr
"Adjusting the Size and Position of the Image" p.38
"Using the Projector as a Bluetooth® Speaker" p.48
"Adjusting the Color Convergence (Panel Alignment)" p.71
58
Zoom & Shi — Resizes the p
the image position.
Advanced Settings Smart Eye
Prote
ction
Projection Selects the way the projector faces the
Indicators Set to O to turn o the indicator lights
High Altitude
Mode
Panel Alignment Corrects color misalignment in the
Bluetooth Speaker
Mode
— Open
Select On to enable the Smart Eye
Protection function.
When the projector's sensor detects
obstacles that are interfering with the
projection area, the brightness of the
light source is automatically reduced to
minimize glare.
screen so t
on the p
warning occurs.
Set to
operating temperature at altitudes above
1,500 m.
proje
screen to switch to Bluetooth Speaker
Mode.
he image is oriented correctly.
rojector except when an error or
On to regulate the projector’s
cted image.
s the Bluetooth device connection
rojected image and adjusts
Page 59
Image Quality Settings - Display & Sound Menu
59
Settings on the Display & So
und menu let you adjust the quality of your image
and optimize the sound for the input source you are currently using.
Setting Options Description
Display Picture Mode Select your favorite color mode from the
list.
t Output Adjusts the brightness of the light source.
Ligh
You canno
the brightness of the light source dims
because the surrounding temperature is
too high or for other factors.
Brightness Lightens or darkens the overall image.
Contrast Adjusts the dierence bet
dark areas of the image.
Saturation Adjusts the overall vividness of the color.
Tint Adjusts the balance of green to magenta
tones in th
Sharpness Adjusts the sharpness or soness
image.
Advanced Settings See the table below for details.
Reset to Default Resets all adjustment values on the
Display m
Screen See the list of
available asp
ratios.
Sound Sound Mode Select your favorite mode for sound
Reset to Default Resets all adjustment values on the Sound
ect
Sets the aspect ratio (width-to-height
ratio) for the input source. (is setting
is available only when the current input
source is HDMI.)
outpu
system according to the playback
contents.
menu t
t adjust the brightness if
ween light and
e image.
of the
enu to their default settings.
t from the projector's speaker
o their default settings.
Setting Options Description
Audio Output Digital Output Selects the sound output format when
put audio to an external audio
justs the audio latency. If the audio is
lect SPDIF to output audio only from
Digital Output
Delay
Audio Output
Device
you out
device.
Ad
fast, select a higher value.
Se
an audio/video system connected to the
projector's Optical Out port. No audio is
output from the projector's speakers.
Advanced Settings
Setting Description
Picture o Turns
Color Temperature Sets the color temperature according to the color mode
DNR Reduces ickering in images.
MPEG NR Red
Projection Preferences Selects whether to prioritize brightness or color tone
Dynamic Contrast Adjusts the projected luminance based on the image
Scene Adaptive Gamma Adjusts the coloring according to the scene, and obtains
Local Contrast Control Enhances the contrast of the projected image.
Dynamic Color Booster Automatically adjusts saturation according to the scene
Flesh Tone Lightens the skin tone of the image.
o the projected image.
you sele
when pro
•
•
bright
a more vi
the contrast.
and makes th
cted.
uces the noise or artifacts seen in MPEG video.
jecting an image.
Fine: Prioritizes color tone.
Bright: Prioritizes brightness.
ness.
vid image. Higher values enhance the more
e projected image colorful.
Page 60
Image Quality Settings - Display & Sound Menu
60
Setting Description
Gamma Selects the gamma to adjust the coloring.
Game Mode Improves the response speed for images projected at
high speed, such as games. is setting is displayed only
when:
•
ALLM is set to O.
•
Frame Interpolation is set to O.
ALLM Automatically adjusts the response speed according to
your pro
PC Mode Select On to project the image while preserving the
color info
is available only when the current input source is
HDMI.
Frame Interpolation Adjusts the smoothness of image movement. is
settin
•
•
AISR Highlights the sharpness of the image by using image
analysis wi
De-contour Reduces banding noise in the image.
jected content.
rmation of the input image signal. is setting
g is displayed only when:
Game Mode is set to O.
PC Mode is set to O.
th AI technology.
Setting Description
HDMI RGB Range Sets the video range to match the setting of the device
connect
Related Links
g
•
"Adjusting Image Quality (Color Mode)" p.41
•
"Adjusting Image Quality in Detail" p.42
•
"Adjusting the Light Source Brightness" p.44
•
"Image Aspect Ratio" p.40
•
"Changing the Sound Mode" p.46
ed to the HDMI port.
Low Blue Light Reduces blue light in the projected image.
Color Tuner Set Enable to On to enable the Color Tuner settings.
Adju
sts the individual R (red), G (green), B (blue),
C (cyan), M (magenta), Y (yellow), and Flesh Tone
components of the Hue, Saturation, and Brightness
settings.
Adjusts the individual R (red), G (green), and B (blue)
components of the oset and gain.
AIPQ Analyzes the image for each scene and applies suitable
image corr
projector's chip.
ection based on the picture database in the
Page 61
Other Menus
61
Options on other menus let you customize various projector's OS features.
Related Links
g
•
"Netwo
•
"Accounts & Proles Menu" p.61
•
"Privacy Menu" p.61
•
"Apps Menu" p.61
•
"System Menu" p.61
•
"Accessibility Menu" p.61
•
"Remotes & Accessories Menu" p.62
•
"Help & Feedback Menu" p.62
rk & Internet Menu" p.61
Network & Internet Menu
Settings on the Network & Internet menu let you view network information
and set up the projector for controlling over a network.
Accounts & Proles Menu
Settings on the Accounts & P
used to log in to the projector, and make detailed settings for these accounts.
roles menu let you add new Google Accounts
System Menu
Settings on the Syste
Setting Description
Ambient Screensaver Allows you to make settings for the screen saver.
Power & Energy Allows you to make settings for power and energy
A
bout Displays the projector's preferences and status.
Date & Time Adjusts the projector's system time and date settings.
Language Select the language used for the projector menus and
K
eyboard Allows you to make detailed settings for the virtual
Storage Allows you to display the usage status of the internal
Cast Turns on/o the cast function.
System s
Restar
ounds Turns on/o the system sounds.
t Restarts the projector.
m menu let you customize various projector features.
saving.
You can ret
default values from this menu.
messages.
keybo
storage an
urn all the projector settings to their factory
ard installed in the projector's menu.
d clean the cache.
Privacy Menu
Settings on the Privacy men
Apps Menu
pps menu displays your most recently used apps or all the apps that are
e A
inst
led on the projector.
al
u let you change your privacy and security settings.
Related Links
g
•
alizing the Projector" p.54
"Initi
Accessibility Menu
Settings on the Accessib
as subtitles and text reading.
ility menu let you congure accessibility options, such
Page 62
Other Menus
Remotes & Accessories Menu
62
Settings on the Remotes & A
and the projector, or let you connect/disconnect your Bluetooth devices to the
projector.
ccessories menu let you pair the remote control
Help & Feedback Menu
e Help & Feedback menu provides a link to the projector's OS help page, or
lets you sen
d feedback or comments about the product.
Page 63
Maintaining the Projector
Follow t
g
•
•
•
•
•
•
he instructions in these sections to maintain your projector.
Related Links
"Projector Maintenance" p.64
"Cleaning the Projection Window" p.65
"Cleaning the Motion Sensor" p.66
"Cleaning the Projector Case" p.67
"Air Filter and Air Intake Vent Maintenance" p.68
"Adjusting the Color Convergence (Panel Alignment)" p.71
Page 64
Projector Maintenance
You may need to clean the projection window and motion sensor periodically,
and clean th
due to blocked ventilation.
e only parts you should replace are the air lter and remote control batteries.
If any other part needs replacing, contact Epson or an authorized Epson
servicer.
Before c
Never open any cover on the projector, except as specically explained in this
manual. Dangerous electrical voltages in the projector can injure you severely.
e air lter and air vents to prevent the projector from overheating
Warning
leaning any part of the projector, turn it o and unplug the power cord.
64
Page 65
Cleaning the Projection Window
Clean the projection window periodically, or whenever you notice dust or
smudges on th
•
To remove dust or smudges, gently wipe the projection window with clean
and dry lens-cleaning paper.
•
If the projection window is dusty, blow o dust using a blower, and then wipe
the projection window.
•
Before c
power cord.
•
Do not use any ammable gas sprays such as air dusters to blow o dust. e
high heat generated by the projector may cause a re.
Attention
•
Do not wi
so could damage the projection window.
•
Do not use any harsh materials to clean the projection window and do not
subject the projection window to any impacts; otherwise, it could be damaged.
e surface.
Warning
leaning the projection window, turn o the projector and unplug the
pe the projection window right aer you turn o the projector. Doing
65
Page 66
Cleaning the Motion Sensor
Clean the projector's motion sensor periodically, or if you see a message telling
you to rem
remove dust or smudges, gently wipe the sensors with lens-cleaning paper.
Do not us
e high heat generated by the projector may cause a re.
ove any obstacles that are interfering with the projection area. To
Warning
e a lens cleaner that contains ammable gas to clean the motion sensor.
66
Attention
Do not use glass cleaner or any harsh materials to clean the sensors and do not
subject the sensors to any impacts. Damage to the surface of the sensors may cause
malfunctions.
Page 67
Cleaning the Projector Case
67
Before cleaning the projector case, turn o the p
cord.
•
To remove dust or dirt, use a so, dry, lint-free cloth.
•
To remove stubborn dirt, use a so cloth moistened with water and mild
soap. Do not spray liquid directly on the projector.
rojector and unplug the power
Attention
Do not us
projector case. ese can damage the case. Do not use canned air, or the gases
may leave a ammable residue.
e wax, alcohol, benzene, paint thinner, or other chemicals to clean the
Page 68
Air Filter and Air Intake Vent Maintenance
68
Regular lter maintenance is important to maintain your projector. Clean
the air l
projector has reached a high level. It is recommended that you clean these parts
about once every year. Clean them more oen than this if you use the projector
in an environment that is dustier than expected. (Assuming the projector is used
in an atmosphere in which airborne particulate matter is less than 0.04 to 0.2
mg/m3.)
Attention
If regular m
the temperature inside the projector has reached a high level. Do not wait until this
warning appears to maintain your projector lter as prolonged exposure to high
temperatures may reduce the life of your projector.
g
•
•
•
ter when a message appears telling you the temperature inside the
aintenance is not performed, your Epson projector will notify you when
Related Links
"Cleaning the Air Filter " p.68
"Replacing the Air Filter" p.69
"Cleaning the Air Intake Vents " p.70
Cleaning the Air Filter
Slide the air
b
Pull the air l
c
lter cov
ter ou
er latch and pull out the air lter cover.
t of the air lter cover.
You need to clean the projector's air lters in t
•
e lter or vents get dusty.
Turn o the projector and unplug the power cord.
a
he following situations:
Vacuum the front of the air lter (the side with the tabs) to remove any
d
remaining dust.
Page 69
Air Filter and Air Intake Vent Maintenance
69
Attention
•
Do not rin
it.
•
Do not use canned air. e gases may leave a ammable residue or push
dust and debris into the projector's optics or other sensitive areas.
Place the air lter wi
e
Attention
Do not fo
Doing so could damage the projector.
se the air lter in water, or use any detergent or solvent to clean
th the four tabs facing down as shown.
rce the air lter cover to close with the tabs on the air lter facing up.
Slide the air
b
Pull the air l
c
lter cover latch and open the air lter cover.
t of the projector.
ter ou
Close the air lter cov
f
er until it clicks into place.
Replacing the Air Filter
You need to replace the air lter in th
•
e air lter is torn or damaged.
Turn o the projector and unplug the power cord.
a
e following situations:
Dispose of used air lters acco
•
Filter frame: Polypropylene
•
Filter: Polypropylene, PET
rding to local regulations.
Page 70
Air Filter and Air Intake Vent Maintenance
70
Place the new air lter wi
d
Attention
Do not fo
Doing so could damage the projector.
Close the air lter cov
e
Related Links
g
•
"Replacement Parts" p.88
rce the air lter cover to close with the tabs on the air lter facing up.
th the four tabs facing down as shown.
er until it clicks into place.
Carefully remove the dust using a vacuum cleaner or a brush.
c
Cleaning the Air Intake Vents
Clean the projector's air intake vents periodically, or whenever you notice dust
on the sur
blocked ventilation.
a
b
face of the vents to prevent the projector from overheating due to
Turn o the projector and unplug the power cord.
Turn th
e projector upside down.
Page 71
Adjusting the Color Convergence (Panel Alignment)
You can use the Panel Alignment feature to manually adjust the color
converg
You can adjust the pixels horizontally and vertically in increments of 0.125
pixels within a range of ± 3 pixels.
ence (the alignment of the red and blue colors) in the projected image.
•
You can adj
standard color panel and cannot be adjusted.
•
Image quality may decline aer performing Panel Alignment.
•
Images for pixels that extend beyond the edge of the projected screen
are not displayed.
ust only the red or blue color convergence. Green is the
e
•
B to adjus
Select Pattern Color and choose the grid color displayed when making
adjus
tments. e available color varies depending on the Select Color
setting.
•
R/G/B to display the grid color in white.
•
R/G to display the grid color in yellow. R/G is only displayed when
Select Color is set to R.
•
G/B to display the grid color in cyan. G/B is only displayed when Select
Color is set to B.
t the blue color convergence.
71
Press the button on the remote control to open the Projec
a
Select the menus in the following order:
b
s Advanced Settin
Select Panel Alignment and set it to On.
c
Selec
t S
d
•
elect Color and choose one of the following:
j
R to ad
ust the red color convergence.
gs > Panel Alignment
tor menu.
Select Next.
f
Selec
g
h
i
j
t one of the following options on the Selec
•
Select Whole Panel to adjust the entire panel at the same time and go to
the next step.
•
Select Four Corners to adjust the corners of the panel one at a time and
go to step 11.
Use the arrow buttons on the remote control to adjust the color alignment
select
ed in Select Color, and then press [Enter].
Adjustment aects th
Select one of the following options:
•
S
Adjust the four corners to ne-tune your adjustments.
elect
•
Select Exit to nish adjustments.
Use the arrow buttons on the remote control to adjust the color alignment
of the scr
een corner, and then press [Enter].
e grid lines in the entire screen.
t Method screen:
Page 72
Adjusting the Color Convergence (Panel Alignment)
72
When you are nished
k
Select one of the following options:
l
•
If your pr
Adjustment. Use the arrow buttons on the remote control to highlight
the corner of any misaligned box on the screen, press [Enter], make any
necessary adjustments, and then press [Enter] again. Repeat this step as
necessary for the other intersections.
•
Select Exit to nish adjustments.
ojector needs additional panel alignment, select Fine
adjusting each corner of the screen, press [Enter].
Page 73
Solving Problems
Check t
g
•
•
•
•
•
•
•
•
•
he solutions in these sections if you have any problems using the projector.
Related Links
"Projection Problems" p.74
"Projector Indicator Status " p.75
"Solving Projector Power-On or Power-O Problems" p.77
"Solving Image Problems" p.78
"Solving Sound Problems" p.81
"Solving Remote Control Operation Problems" p.83
"Solving HDMI CEC Problems" p.84
"Solving Wi-Fi Network Problems" p.85
"Solving Projector's OS Problems" p.86
Page 74
Projection Problems
74
If the projector is not working properly, turn it o, unpl
back in and turn it on.
If this does not solve the problem, check the following:
•
e indicators on the projector may indicate the problem.
•
e solutions in this manual can help you solve many problems.
If none of these solutions help, contact Epson for technical support.
Aer repairing the projector, Epson may return the projector to you in
its initi
al status. Make sure you make a note of the account information
of each online service before you contact your local dealer or the nearest
Epson repair center.
ug it, and then plug it
Page 75
Projector Indicator Status
75
e indicators on the projector indicate the projector status and let you know
when a pr
oblem occurs. Check the status and color of the indicators and then
refer to this table for a solution.
If the indicators display a pattern not listed in the table below, turn the
proje
ctor o, unplug it, and contact Epson for help.
Status indicator
A
Projector status
Indicator status/
Operation s
tatus
Problem and solutions
Indicator status/
Operation s
Flashing white (Entering
standb
updating the projector
rmware)
When the rmware
update starts, a message
is displayed on the
screen.
O (Standby mode) When you press the power button, projection starts.
Lit oran
status)
Y
ou can check the details
of the warning on the
screen.
tatus
y mode or
ge (Warning
Problem and solutions
Remote control operations may be disabled when the
indicator is ashing white.
e projector has overheated and turned o. Leave it
turned o to cool down for 5 minutes.
•
Make sure that the vents and air lter are not clogged
with dust or obstructed by nearby objects.
•
Make sure the environmental temperature is not too
hot.
•
Clean or replace the air lter.
•
If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's menu.
s Projector > Advanced Settings > High Altitude
Mode
•
If the problem persists, unplug the projector and
contact Epson for help.
Lit white (Normal
operation)
e
projector can display
images.
-
Page 76
Projector Indicator Status
76
Indicator status/
Operation s
Flashing orange (Error
status)
Y
ou cannot turn on the
projector.
tatus
Problem and solutions
Movement detection warning.
A beep soun
Playback has been stopped for safety reasons. Move
away from the lens or remove any obstacles around the
lens.
e brightness of the light source is reduced.
•
Make sure that there are no one looking into the
projection window. Move away from the projection
window.
•
Clean the motion sensor if there is no one near the
projection window.
Laser warning.
Turn the p
help.
Laser has a problem.
Turn the projector o, unplug it, and contact Epson for
help.
A fan or sensor has a problem.
Turn the p
help.
ds, and the following message is displayed.
rojector o, unplug it, and contact Epson for
rojector o, unplug it, and contact Epson for
Internal projector error.
Turn the p
help.
Relat
g
•
•
•
•
ed Links
j
ector Feature Settings - Projector Menu" p.58
"Pro
"Cleaning the Air Filter " p.68
"Replacing the Air Filter" p.69
"Cleaning the Air Intake Vents " p.70
rojector o, unplug it, and contact Epson for
Page 77
Solving Projector Power-On or Power-O
Problems
77
Check the solutions in these sections if the projector does not turn on when you
press th
g
•
•
e power button or it turns o unexpectedly.
Related Links
"Solving Projector Power Problems" p.77
"Solving Projector Shutdown Problems" p.77
Solving Projector Power Problems
If the projector does not turn on when you press the power button, try the
following steps until the problem is solved.
Make sure the power cord is securely connected to the projector and to a
a
workin
If you are using the remote control, check the batteries of the remote
b
contro
e power cord may be defective. Disconnect the cord and contact Epson
c
for he
g electrical outlet.
l.
lp.
e p
a
b
c
rojector may have turned o aer the interval of time specied in
Shut-O
the power button on the projector or remote control to turn the projector
back on.
s System > Power & Energy > Shut-O Timer
Aer switching to HDMI source, if there is no input signal for more
than th
automatically enters standby mode. Press the power button to wake the
projector from standby mode.
s Channels & Inputs > Inputs > HDMI 1/HDMI 2/HDMI 3 > No signal
standby timeout
When the status indicator is lit orange, the projector has overheated and
turned
Timer in the projector's Power & Energy menu has passed. Press
e time specied in No signal standby timeout, the projector
o.
e cooling fans may run in standby status depending on the
ector settings. Also, when the projector wakes from standby
proj
status, the fans may cause an unexpected noise. is is not a
malfunction.
Related Links
g
•
"Turning On the Projector" p.30
•
"Installing Batteries in the Remote Control" p.24
Solving Projector Shutdown Problems
If the projector's light source turns o un
the problem is solved.
e
ctedly, try the following steps until
exp
Make sure that there are no obstacles interfering with the projection
d
w
indow. R
Related Links
g
•
"Projector Feature Settings - Channels & Inputs Menu" p.57
•
"System Menu" p.61
emove any obstacles.
Page 78
Solving Image Problems
78
Check the solutions in these sections if you have any problems with projected
images.
Related Links
g
•
lving Missing Image Problems" p.78
"So
•
"Adjusting an Image that is not Rectangular" p.79
•
"Adjusting a Fuzzy or Blurry Image" p.79
•
"Fixing Partial Image Problems" p.79
•
"Adjusting an Image that Contains Noise or Static" p.80
•
"Adjusting an Image with Incorrect Brightness or Colors" p.80
Solving Missing Image Problems
If no image is displayed, try the following steps until the problem is solved.
Check the projector's status:
a
•
Check t
operating status.
•
Press the projector's power button to wake it from standby mode.
•
Aer switching to an HDMI source, if there is no input signal for more
than the time specied in No signal standby timeout, the projector
automatically enters standby mode. Press the power button to wake the
projector from standby mode.
s Channels & Inputs > Inputs > HDMI 1/HDMI 2/HDMI 3 > No
signal standby timeout
Check the cable connection:
b
•
Make sure al
on for the projector.
•
Connect the video source directly to the projector.
•
Replace the HDMI cable with a shorter one.
he status indicator to conrm that the projector is in normal
l necessary cables are securely connected and the power is
We recommend using an HDMI cable that is ve meter
you use an HDMI cable that is longer than ve meters, the signal may
deteriorate and the video and audio may become unstable.
•
When sending 18 Gbps images such as 4K 60 Hz 4:4:4, use an HDMI
cable (premium-high speed).
Check the status of your video source:
c
•
Turn on th
video, if necessary.
•
Make sure the connected device meets the HDMI CEC standard. See
the documentation supplied with the device for more information.
•
If you are projecting from a laptop computer, make sure it is set up to
display on an external monitor.
Check the following items:
d
•
You nee
your Wi-Fi is on.
•
Turn o the projector and the connected video source, and then turn
them back on.
•
Set the CEC function for the connected device again and restart the
device.
•
Make sure the computer's display resolution does not exceed the
projector's resolution and frequency limits. If necessary, select a
dierent display resolution for your computer. (See your computer
manual for details.)
•
Reset all of the projector settings to their default values.
Related Links
g
•
"Projector Feature Settings - Channels & Inputs Menu" p.57
e connected video source, and press the play button to start a
d an Internet connection to view online content. Make sure
s or shorter. If
Page 79
Solving Image Problems
79
Adjusting an Image that is not Rectangular
If the projected image is not evenly rectangular, try the following steps until the
problem i
a
b
Related Links
g
•
"Correcting Distortion in the Image" p.34
s solved.
Place the projector directly in front of the center of the screen, facing it
square
ly, if possible.
Correct the distortion in the projected image using the projector's
Keyst
one menu.
s Projector > Keystone
Adjusting a Fuzzy or Blurry Image
If the projected image is fuzzy or blurry, try the following steps until the
problem i
a
b
c
s solved.
Adjust the image focus using the focus lever.
Position the projector close enough to the screen.
Clean the projection window.
Adjust the Sharpness setting in the projector's Display & Sound menu to
d
impro
ve image quality.
s Display & Sound > Display > Sharpness
If you are projecting from a computer, use a lower resolution or select a
e
resolu
tion that matches the projector's native resolution.
Related Links
g
•
"Focusing the Image Using the Focus Lever" p.33
•
"Image Quality Settings - Display & Sound Menu" p.59
•
"Cleaning the Projection Window" p.65
Fixing Partial Image Problems
If only a partial image is displayed, try the following steps until the problem is
d.
solve
Adjust the position of the projected image using the Zoom & S
a
in the Projector menu.
s Projector > Zoom & Shi
Select an appropriate aspect ratio from the Screen
b
current input source. (Available only when the current input source is
HDMI.)
s Display & Sound > Screen
menu according to the
hi setting
To avoid condensation on the lens aer bringin
in from a cold environment, let the projector warm up to room
temperature before using it.
g the projector
Check your computer display settings to disable dual display and set the
c
resolu
tion within the projector's limits. (See your computer manual for
details.)
Related Links
g
•
"Adjusting the Size and Position of the Image" p.38
•
"Changing the Image Aspect Ratio" p.40
Page 80
Solving Image Problems
80
Adjusting an Image that Contains Noise or Static
If the projected image contains electronic interference (noise) or static, try the
follow
ing steps until the problem is solved.
Check the cables connecting your video source to the projector. ey
a
shou
ld be:
•
Separated from the power cord to prevent interference
•
Securely connected at both ends
•
Not connected to an extension cable
Adjust the DNR sett
b
s Display & Sound > Display > Advanced Settings > DNR
If you adjusted the image shape using the projector controls, try
c
decreasing t
to improve image quality.
s Display & Sound > Display > Sharpness
If you connected an extension power cable, try projecting without it to see
d
if it cause
Select a computer video resolution and refresh rate that are compatible
e
with th
he Sharpness setting in the projector's Display & Sound menu
d interference in the signal.
e projector.
ing in the projector's menu.
Adjusting an Image with Incorrect Brightness or Colors
If the projected image is too dark or bright, or the colors are incorrect, try the
follow
ing steps until the problem is solved.
Try dierent color modes for your image and environment by selecting
a
the colo
s Display & Sound > Display > Picture Mode
Check your video source settings.
b
Adjust the color settings in the Dis
c
s Display & Sound > Display
Make sure you selected the correct HDMI RGB Rang
d
projector's Display & Sound menu, if available for your image source.
(Available only for the HDMI source.)
s Display & Sound > Display > Advanced Settings > HDMI RGB
Range
Make sure all the cables are securely connected to the projector and your
e
video equi
cables.
Position the projector close enough to the screen.
f
r mode setting in the projector's Picture Mode menu.
play m
pment. If you connected long cables, try connecting shorter
enu.
e setting in the
If you connected an A/V system that does not support eARC/ARC to the
f
HDMI port, t
Related Links
g
•
"Image Quality Settings - Display & Sound Menu" p.59
he image may be distorted.
Related Links
g
•
"Image Q
uality Settings - Display & Sound Menu" p.59
Page 81
Solving Sound Problems
81
Check the solutions in these sections if you have any problems with projected
sound.
ed Links
Relat
g
•
"Solving Missing or Low Audio Problems" p.81
•
"Solving Bluetooth Speaker Mode Problems" p.81
Solving Missing or Low Audio Problems
If there is no sound or the volume is too low, try the following steps until the
problem is solved.
Adjust the projector's volume settings using the up/down buttons on
a
the remote control.
Check the cable connection between the projector and your video source.
b
Check your video source to make sure the volume is turned up and the
c
audio o
If you want to output audio from the projector's speakers, check that
d
Global CEC con
s Channels & Inputs > Inputs > Global CEC control
t is set for the correct source.
utpu
trol is set to O.
•
When out
not support HDMI eARC/ARC using an HDMI cable, set Global
CEC control to O in the projector's menu.
s Channels & Inputs > Inputs > Global CEC control
•
See the Supplemental A/V Support Specication for eARC/ARC
audio supported formats.
If audio is not output properly to an external audio device that supports
f
HD
MI eAR
setting.
s Display & Sound > Audio Output > Digital Output
To output audio only from an external device connected to the projector's
g
Optical O
Device to SPDIF.
s Display & Sound > Audio Output > Audio Output Device
Related Links
g
•
"Projector Feature Settings - Channels & Inputs Menu" p.57
•
"Image Quality Settings - Display & Sound Menu" p.59
C/AR
ut port and not from the projector's speakers, set Audio Output
putting audio to an external audio device that does
r
y changing Auto to PCM as the Digital Output
C, t
Solving Bluetooth Speaker Mode Problems
If you want to output audio to an external audio device that supports
e
HDMI eARC/ARC usin
•
Set Global CEC control to On in the projector's menu when using an
ARC connection.
s Channels & Inputs > Inputs > Global CEC control
•
Make sure the HDMI cable is compliant with HDMI eARC and ARC.
g an HDMI cable, try the following solutions:
If you cannot connect a Bluetooth audio device to the projector, try the
follow
ing solutions.
Select Bluetooth Speaker Mode in the Projector menu and press the
a
[Enter] bu
tton on the remote control.
Page 82
Solving Sound Problems
Select the projector name (this projector) from the list of available
b
Bluetoo
Check your Bluetooth audio device to make sure the volume is turned up
c
an
Make sure only one Bluetooth device is connected to the projector.
d
You canno
the same time.
th devices displayed on your device.
You can check and change the projector name from the projector's
Device name
s System > About > Device name
d the audio ou
t connect multiple Bluetooth audio devices to the projector at
menu.
tput settings are correct.
82
Make sure the device meets the projector's Bluetooth specicat
e
Check the following items:
f
•
Check f
projector, and change their positions to improve communication.
•
Make sure the connected Bluetooth audio device is within the specied
communication distance.
•
Avoid using the projector near wireless networks, microwave ovens, 2.4
GHz cordless phones, or other devices that use the 2.4 GHz frequency
band. ese devices can interfere with the signal between the projector
and the Bluetooth audio device.
Related Links
g
•
"Using the Projector as a Bluetooth® Speaker" p.48
•
"Bluetooth Specications" p.92
or obstacles between the Bluetooth audio device and the
ions.
Page 83
Solving Remote Control Operation Problems
83
If the projector does not respond to remote control commands or responds
, try the following steps until the problem is solved.
slowly
If you lose the remote control, you can order another one. Contact Epson
for hel
p.
Check that the remote control batteries are installed correctly and have
a
power. If necessary, replace the batteries.
e buttons on the remote control may be stuck down and you may not be
b
able to op
If the pairing screen is displayed, perform pairing again by holding down
c
the
about thr
erate them. Return the buttons to their normal positions.
button and button on the remote control at the same time for
ee seconds.
•
When p
projector.
•
When pairing starts, the indicator on the remote control ashes.
When pairing is complete, the indicator turns o.
•
You cannot pair multiple remote controls with the projector at
the same time. Pairing a new remote control will unpair the
existing one. Make sure the intended remote control is paired.
in
g, place the remote control within one meter of the
air
Strong uorescent lighting, direct sunlight, or infrared device signals may
f
be inter
move the projector away from the sun or interfering equipment.
e remote control may be defective. Contact Epson for help.
g
Related Links
g
•
"Remo
•
"Installing Batteries in the Remote Control" p.24
fering with the projector's remote receivers. Dim the lights or
te Control Operation" p.24
Perform pairing again by displaying the pairing screen manually from the
d
Remotes & A
If the image is projected from the projector, make sure you are operating
e
the remo
ccessories menu.
te control within the reception angle and range of the projector.
Page 84
Solving HDMI CEC Problems
If you cannot operate the connected devices from the projector, try the
ing steps until the problem is solved.
follow
Make sure the cable meets the HDMI CEC standard.
a
Make sure the connected device meets the HDMI CEC standard. See the
b
do
cument
Set Global CEC control to On in the Channels & Inputs menu.
c
s Channels & In
Make sure all the cables are securely connected to the projector and your
d
video equi
Make sure the connected devices are turned on and in standby status. See
e
the docum
If you connect a new device or change the connection, set the CEC
f
functio
ation supplied with the device for more information.
puts > Inputs > Global CEC control
pment.
entation supplied with the device for more information.
n for the connected device again and restart the device.
84
Related Links
g
•
"Operating Connected Devices Using the HDMI CEC Features" p.51
•
"Projector Feature Settings - Channels & Inputs Menu" p.57
Page 85
Solving Wi-Fi Network Problems
If you cannot connect to a Wi-Fi network, try the following solutions.
Make sure your Wi-Fi router and modem are working properly. Rebooting
a
these dev
Check for obstacles between the Wi-Fi router and the projector, and
b
change t
ices may solve the network connection problem.
heir positions to improve communication.
85
You can check the network settings from Wi-Fi in th
c
menu.
If you initialize the projector, you need to select the network settings again
d
on the init
Related Links
g
•
"Initializing the Projector" p.54
ial setup screen.
e Network & Internet
Page 86
Solving Projector's OS Problems
See the following page if you have any problems when watching the online
content.
ttps://support.google.com/googletv/
h
86
Page 87
Appendix
Check t
g
•
•
•
•
•
•
•
•
•
hese sections for the technical specications and important notices about your product.
Related Links
"Optional Accessories and Replacement Parts" p.88
"Screen Size and Projection Distance" p.89
"Supported Monitor Display Resolutions" p.90
"Projector Specications" p.91
"External Dimensions" p.93
"List of Safety Symbols and Instructions" p.94
"Laser Safety Information" p.96
"Glossary" p.99
"Notices" p.100
Page 88
Optional Accessories and Replacement Parts
e following optional accessories and replacement parts are available. Please
ase these products as and when needed.
purch
e following list of optional accessories and replacement parts is current as of:
July 2025.
Details of accessories are subject to change without notice and availability may
vary depending on the country of purchase.
Related Links
g
•
"Screens" p.88
•
"Replacement Parts" p.88
Screens
Ultra Short Throw Screen ELPSC35 (100")
Ultra Short Throw Screen ELPSC36 (120")
Screens to be installed on a wall. (Aspect ratio 16:9)
88
Replacement Parts
Air lt
g
•
er ELPAF60
Use as a r
Related Links
"Replacing the Air Filter" p.69
lacement for used air lters.
ep
Page 89
30.83 cm
Screen Size and Projection Distance
89
Check the table here to determine how far to place the projector from the screen
based on t
A
B
C
D
he size of the projected image.
Projection distance (cm)
Distance from the projector to the bottom of the screen (cm)
Distance from the projector to the top of the screen (cm)
Distance from the center of the lens to the rear of the projector (cm)
4:3 screen size
50" 102× 76 33.2 11.9 88.1
55" 112 × 84 37.1 13.7 97.5
60" 122 × 91 41.0 15.5 107.0
65" 132 × 99 44.8 17.4 116.4
70" 142× 107 48.7 19.2 125.9
75" 152 × 114 52.5 21.0 135.3
80" 163× 122 56.4 22.8 144.7
98" 199× 149 70.3 29.4 178.7
16:10 screen size
56" 121 × 75 32.8 11.7 87.1
60" 129 × 81 35.6 13.0 93.8
65" 140 × 88 39.0 14.6 102.1
70" 151× 94 42.4 16.2 110.4
80" 172× 108 49.2 19.4 127.1
90" 194× 121 56.0 22.6 143.8
A B C
A B C
16:9 screen size
60" 133× 75 32.5 11.5 86.3
65" 144× 81 35.6 13.0 94.0
70" 155× 87 38.8 14.5 101.7
75" 166× 93 42.0 16.0 109.4
80" 177× 100 45.1 17.5 117.1
90" 199× 112 51.4 20.5 132.5
100" 221× 125 57.7 23.5 148.0
120" 266× 149 70.3 29.4 178.8
A B C
100" 215× 135 62.8 25.9 160.5
111" 239 × 149 70.3 29.4 178.8
Page 90
Supported Monitor Display Resolutions
See the Supplemental A/V Support Specication for detailed information on
compat
format.
ible refresh rates and resolutions for each compatible video display
90
Page 91
Projector Specications
Product name EH-LS670B/EH-LS670W
Dimensions 467 (W) × 133 (H) × 400 (D) mm (not including raised
n)
sectio
LCD panel size 0.62"
Display method 3LCD
Operating temperature Altitude of 0 to 2,286 m: +5 to +35°C (Humidity of 20 to
80%, No condens
Altitude of 2,287 to 3,048 m: +5 to +30°C (Humidity of
20 to 80%, No condensation)
Storage temperature -10 to 60 °C (Humidity of 10 to 90%, No condensation)
Mass Approx. 7.4 kg
ation)
91
Number of pixels Full HD (1,920 (W) × 1,080 (H) dots) × 3
Screen resolution 4,147,200 pixels*
Focus adjustment Manual
Light source Laser diode
Light source output
p
ower
Wavelength 449 to 461 nm
Laser class (internal laser
light sour
Light source life ** Approx. 20,000 hours
Max. audio output 20 W
Speaker 2.1ch (Speaker × 2, Woofer × 1)
Power supply 100-240V AC±10% 50/60 Hz 2.8 - 1.3 A
Power consumption (100
t
o 120 V area)
Power consumption (220
to 240 V area)
Standby power
consump
ce)
tion
o 76.5 W
Up t
Class 4
erating power consumption (When the light source
Op
brightness is 100%): 265 W
Operating power consumption (When the light source
brightness is 50%): 169 W
Op
erating power consumption (When the light source
brightness is 100%): 254 W
Operating power consumption (When the light source
brightness is 50%): 162 W
Communication On: 2.0 W
Communication O: 0.5 W
* Pixel shiing technology achieves 4K resolution on screen.
** Appr
oximate time until the light source brightness decreases to half of its
original value. (Assuming the projector is used in an atmosphere in which
airborne particulate matter is less than 0.04 to 0.2mg/m3. e estimated time
varies depending on the projector usage and operating conditions.)
e rating label is attached on the bottom surface of the projector.
is product is also designed for IT power distribution system with phase-to-
phase voltage 230V.
Related Links
g
•
"Connector Specications" p.91
•
"Bluetooth Specications" p.92
Connector Specications
Audio Out port 1 Stereo mini pin jack (3-pin)
HDMI1 port 1 HDMI (Type A)
HDMI2 (eARC/ARC) port 1 HDMI (Type A)
HDMI3 port 1 HDMI (Type A)
USB-A port 2 USB connector (Type A)
Service port 1 USB connector (Mini-B)
Optical Out port 1 Optical digital audio connector (S/PDIF)
Operating altitude Altitude 0 to 3,048 m
Page 92
Projector Specications
USB-A port supports USB 2.0. However, USB ports are not guaranteed to
operate all de
Bluetooth Specications
Version Bluetooth Ver. 5.2
Output Class 2
Communication distance Approx. 10 m
vices that support USB.
92
Supported p
Frequency used 2.4 GHz band (2.402 to 2.480 GHz)
Supported codecs SBC, AAC
roles A2DP, A
VR
CP, and HID
Warning
Do not us
automatically controlled, such as automatic doors or re alarms. Electromagnetic
interference from the device may cause such equipment to malfunction and cause an
accident.
e the device near any medical equipment or equipment that is
•
•
•
ay n
You m
device.
Even when connecting within the specied communication distance,
connections can be lost due to the strength of the signal.
e communication method for Bluetooth uses the same frequency
(2.4 GHz) as wireless LAN (IEEE802.11b/g) or microwave ovens.
erefore, if these devices are used at the same time, radio
wave interference may occur, the audio may be interrupted, or
communication may not be possible. If you do need to use these
devices at the same time, make sure there is enough distance between
them and the Bluetooth device.
t be able to connect depending on the standard and type of
o
Page 93
External Dimensions
93
Center of the projection window
A
e unit in these illustrations is mm.
Page 94
List of Safety Symbols and Instructions
94
e following table lists the meaning of the safety symbols labeled on the
ment.
equip
No. Symbol mark Approved
ds
A
B
C
D
standar
IEC60417
No. 5007
IEC60417
No. 5008
IEC60417
No. 5009
ISO7000
No. 0434B
IEC3864-B3.1
,
Description
"ON" (po
To indicate connection to the mains.
"OFF" (po
To indicate disconnection from the
mains.
Stan
To identify the switch or switch
position by means of which part of the
equipment is switched on in order to
bring it into the stand-by condition.
au
C
To identify general caution when using
the product.
wer)
wer)
d-by
tion
No. Symbol mark Approved
ds
standar
H
I
J
K
L
IEC60417
No. 5926
— e same as No. 8.
IEC60417
No. 5001B
IEC60417
No. 5002
— e same as No. 11.
Description
arity of d.c. power connector
Pol
To identify the positive and negative
connections (the polarity) on a piece
of equipment to which a d.c. power
supply may be connected.
ery, general
Batt
On battery powered equipment. To
identify a device for instance a cover
for the battery compartment, or the
connector terminals.
ioning of cell
Posit
To identify the battery holder itself and
to identify the positioning of the cell(s)
inside the battery holder.
E
F
G
IEC60417
No. 5041
IEC60417
No. 6042
ISO3864-B3.6
IEC60417
No. 5957
Caut
ion, hot surface
To indicate that the marked item can
be hot and should not be touched
without taking care.
Caut
ion, risk of electric shock
To identify equipment that has risk of
electric shock.
For in
door use only
To identify electrical equipment
designed primarily for indoor use.
M
N
IEC60417
No. 5019
IEC60417
No. 5017
Pro
tective earth
To identify any terminal which is
intended for connection to an external
conductor for protection against
electric shock in case of a fault, or the
terminal of a protective earth electrode.
Eart
h
To identify an earth (ground) terminal
in cases where neither the symbol No.
13 is explicitly required.
Page 95
List of Safety Symbols and Instructions
95
No. Symbol mark Approved
ds
O
P
Q
R
S
standar
IEC60417
No. 5032
IEC60417
No. 5031
IEC60417
No. 5172
ISO 3864 General prohibition
ISO 3864 Contact prohibition
Description
ernating current
Alt
To indicate on the rating plate that the
equipment is suitable for alternating
current only; to identify relevant
terminals.
Direct current
To indicate on the rating plate that the
equipment is suitable for direct current
only; to identify relevant terminals.
Clas
s II equipment
To identify equipment meeting the
safety requirements specied for Class
II equipment according to IEC 61140.
To identify ac
are prohibited.
To indicate in
due to touching a specic part of the
equipment.
tions or operations that
jury that could occur
No. Symbol mark Approved
ds
standar
W
X
Y
Z
a
b
ISO 3864 Disassembly prohibition
IEC60417
No. 5266
ISO3864
IEC60417
No. 5057
IEC60417
No. 6056
IEC60417
No. 6043
— To indicate that looking into the lens
Description
To indicate a r
electric shock, if the equipment is
disassembled.
Standby, partial standby
To indicate that part of the equipment
is in the ready status.
ion, movable parts
Caut
To indicate that you must keep away
from movable parts according to
protection standards.
Caution (Moving Fan Blades)
As a safety precaution, stay away from
the moving fan blades.
Caut
ion (Sharp Corners)
To indicate sharp corners that should
not be touched.
while pro
isk of injury, such as
jecting is prohibited.
T
U
V
— Never look into the optical lens while
jector is on.
the pro
— To indicate that the marked item don’t
g on projector.
he equipment has a laser
ISO3864
IEC60825-1
place anythin
Caution, laser radiation
To indicate t
radiation part.
c
d
ISO7010
No. W027
ISO 3864
IEC60417
No. 5109
Warnin
UV, visible radiation, IR)
Taking care to avoid injury to eyes and
skin when in the vicinity of optical
radiation.
Not t
To identify electrical equipment which
is not suitable for a residential area.
g, Optical radiation (such as
o be used in residential areas.
Page 96
Laser Safety Information
96
is product is a laser projector that projects images onto surfaces such as walls
and scre
ens.
is projector is a Class 1 consumer laser product that complies with the
following standards:
•
IEC60825-1:2014
•
EN60825-1:2014+A11:2021
•
EN50689:2021
Follow these safety instructions when using the projector.
Warning
•
Do not op
•
Possibly hazardous optical radiation emitted from this product. Do not look at
operating light source. Eye injury may result.
en the projector's case. e projector contains a high-powered laser.
Caution
Do not dis
local or national laws and regulations.
assemble the projector when disposing of it. Dispose according to your
Laser Warning Labels
Laser warning labels are attached on the projector.
Insid
e
Top
Related Links
g
•
"Laser War
e projector uses a laser as the light source. e laser has the following
charact
eristics.
•
Depending on the surroundings, the brightness of the light source may
decline. e brightness declines a lot when the temperature gets too
high.
•
e brightness of the light source declines the longer it is used. You can
change the relationship between usage time and decline in brightness
settings.
ning Labels" p.96
A
h an
s wit
y bright source, do not stare into the beam, RG2 IEC/EN
62471-5:2015.
Page 97
Laser Safety Information
97
Base
Warning
•
Nev
and is especially dangerous for children and pets.
•
When turning on the projector at a distance using the remote control, make sure
no one is looking into the lens.
•
Do not allow small children to operate the projector. Children must be
accompanied by an adult.
•
Do not look into the lens during projection. Also, do not look into the lens using
optical devices, such as a magnifying glass or telescope. is could cause visual
impairment.
Base
is pro
EN50689:2021.
is projector is the product that projects images onto walls, screens, etc.
o
k into the projector lens when the laser is on. is can damage your eyes
er lo
jector is a consumer CLASS 1 laser product that complies with the
For Nor
th/South America
Complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk
Group 2 LIP as dened in IEC 62471-5: Ed. 1.0. For more information see Laser
Notice No. 57, dated May 8, 2019.
Rating Labels (EH-LS670W/EH-LS670B)
e rating label contains the certication and identication information for the
projector.
Page 98
Laser Safety Information
98
Page 99
Glossary
99
is section briey explains the dicult terms that are not explained in the text
of this guide
Aspect Ratio e ratio between an image's length and its height.
Contrast e relative brightness of the light and dark areas of an image
4K A screen size standard with a resolution of 3,840 (horizontal) ×
Full HD A screen size standard with a resolution of 1,920 (horizontal) ×
HDCP HDCP is an abbreviation for High-bandwidth Digital Content
HDMI
. For details, refer to other commercially available publications.
Screen
s with a horizontal:vertical ratio of 16:9, such as HDTV
screens, are known as wide screens.
SDTV and general computer displays have an aspect ratio of 4:3.
can be incr
out more clearly, or to make them appear soer. Adjusting this
particular property of an image is called contrast adjustment.
2,160 (vertical) do
1,080 (vertical) do
Prote
It is used to prevent illegal copying and protect copyrights by
encrypting digital signals sent over DVI and HDMI ports.
Because the HDMI port on this projector supports HDCP, it can
project digital images protected by HDCP technology.
However, the projector may not be able to project images
protected with updated or revised versions of HDCP encryption.
™
An abbreviation for High Denition
HDMI™ is a standard aimed at digital consumer electronics
and computers. is is the standard by which HD images and
multichannel audio signals are digitally transmitted.
By not compressing the digital signal, the image can be
transferred at the highest quality possible. It also provides an
encryption function for the digital signal.
eased or decreased to make text and graphics stand
ts.
ts.
ction.
Multimedia Interface.
HDTV An abbreviation for High-Denit
high-denition systems which satisfy the following conditions:
•
Vertical resolution of 720p or 1080i or greater (p =
Progressive, i = Interlace)
•
Screen aspect ratio of 16:9
Pairing Register devices in advance when connecting with Bluetooth
devices to ens
Refresh Rate e light-emitting element of a display maintains the same
luminosit
Because of this, the image must be scanned many times per
second to refresh the light-emitting element.
e number of refresh operations per second is called the
Refresh rate and is expressed in hertz (Hz).
SDTV An abbreviation for Standard Denition
standard television systems which do not satisfy the conditions
for HDTV High-Denition Television.
ure mutual communication.
y and color for an extremely short time.
ion Television that refers to
Television that refers to
Page 100
Notices
100
Check these sections for important notices about your projector.
Related Links
g
•
"FCC Com
•
"Indication of the manufacturer and the importer in accordance with
requirements of EU directive" p.101
•
"Restriction of Use" p.101
•
"Trademarks" p.101
•
"Copyright Notice" p.101
•
"Copyright Attribution" p.102
pliance Statement" p.100
FCC Compliance Statement
Supplier's DECLARATION of CONFORMITY
According t
Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers
We: Epson America, Inc.
Locate
Tel: 562-981-3840
Declare under sole responsibility that the product identied herein, complies
with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each
product marketed, is identical to the representative unit tested and found to
be compliant with the standards. Records maintained continue to reect the
equipment being produced can be expected to be within the variation accepted,
due to quantity production and testing on a statistical basis as required by
47CFR 2.906. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
Trade Name: EPSON
Type of Product: LCD Projector
o 47CFR, Part 2 and 15
d at: 3131 Katella Avenue, Los Alamitos, CA
Model: HB82B/HB82J
FC
C Comp
is device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) is device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
is equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. ese limits are designed
to provide reasonable protection against harmful interference in a residential
installation. is equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio and television reception, which can
be determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures.
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
WARNING
e connection of a non-shielded equipment interface cable to this equipment
will invalidate the FCC Certication or Declaration of this device and may
cause interference levels which exceed the limits established by the FCC for
this equipment. It is the responsibility of the user to obtain and use a shielded
equipment interface cable with this device. If this equipment has more than
one interface connector, do not leave cables connected to unused interfaces.
Changes or modications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
liance Statement For United States Users
Loading...