Page 1
User's Guide
Page 2
Contents
2
Notations Used in This Guide 6
Using the Manual to Search for Information .....................................7
earching by Keyword ......................................................................................7
S
Jumping Directly from Bookmarks .....................................................................7
Printing Only the Pages You Need ......................................................................7
Getting the Latest Version of the Documents ................................... 8
List of Functions 9
Introduction to Your Projector 11
Projector Features ............................................................................. 12
uick and Easy Setup ......................................................................................12
Q
Easy Wireless Projection ..................................................................................12
Projector Parts and Functions .......................................................... 14
Projector Parts - Front .....................................................................................14
Projector Parts - Rear .......................................................................................15
Projector Parts - Base ...................................................................................... 17
Projector Parts - Control Panel ......................................................................... 17
Projector Parts - Remote Control ......................................................................19
Connecting to Video Sources ...........................................................................27
Connecting to an HDMI Video Source ............................................................28
Connecting to a Composite Video Source ......................................................28
Connecting to External USB Devices .................................................................29
USB Device Projection ..................................................................................29
Connecting to a USB Device ......................................................................... 30
Disconnecting a USB Device .........................................................................30
Connecting to a Document Camera ................................................................. 30
Connecting to External Devices ....................................................................... 30
Connecting to a VGA Monitor .......................................................................31
Connecting to External Speakers .................................................................. 31
Connecting to a Streaming Media Player .......................................................32
Installing Batteries in the Remote Control ...................................... 33
Remote Control Operation ................................................................34
Opening the Lens Cover ....................................................................35
Using Basic Projector Features 36
Turning On the Projector .................................................................. 37
Home S
Turning O the Projector .................................................................. 40
Selecting the Language for the Projector Menus ........................... 41
creen ..................................................................................................38
Setting Up the Projector 21
Projector Placement ..........................................................................22
rojector Setup and Installation Options .......................................................... 23
P
Projection Distance .........................................................................................23
Projector Connections .......................................................................25
Connecting to a Computer ..............................................................................25
Connecting to a Computer for VGA Video and Audio ......................................25
Connecting to a Computer for USB Video and Audio ...................................... 26
Connecting to a Computer for HDMI Video and Audio ....................................27
Projection Modes ...............................................................................42
Changing the Projection Mode Using the Remote Control ................................. 42
Changing the Projection Mode Using the Menus ...............................................42
Displaying a Test Pattern .................................................................. 44
Adjusting the Image Height ..............................................................45
Image Shape .......................................................................................46
Auto V-Keystone .............................................................................................46
Correcting the Image Shape with the Horizontal Keystone Slider ........................46
Correcting the Image Shape with the Keystone Buttons .....................................47
Page 3
Contents
3
Correcting the Image Shape with Quick Corner .................................................48
Resizing the I
mage with the Zoom Ring .......................................... 50
Focusing the Image Using the Focus Ring ....................................... 51
Selecting an Image Source ................................................................52
Image Aspect Ratio ............................................................................53
Changing the Image Aspect Ratio ....................................................................53
Available Image Aspect Ratios .........................................................................53
Projected Image Appearance with Each Aspect Mode ....................................... 54
Adjusting Image Quality (Color Mode) ............................................ 56
Changing the Color Mode ............................................................................... 56
Available Color Modes .................................................................................... 56
Setting Auto Iris ..............................................................................................56
Controlling the Volume with the Volume Buttons ..........................58
Adjusting Projector Features 59
Projecting Two Images Simultaneously ...........................................60
Unsuppor
Split Screen Projection Restrictions .................................................................. 62
Projecting a PC Free Presentation ....................................................63
Supported PC Free File Types ...........................................................................63
Precautions on PC Free Projection ....................................................................63
Starting a PC Free Slide Show .......................................................................... 64
Starting a PC Free Movie Presentation ..............................................................65
PC Free Display Options ..................................................................................66
Shutting O the Image and Sound Temporarily ............................. 68
ted Input Source Combinations for Split Screen Projection ..................62
Saving a User's Logo Image .............................................................. 72
Saving a User Pattern ........................................................................ 74
Color Dierence Correction when Projecting from Multiple
Projectors ........................................................................................... 75
Setting the Projector ID ...................................................................................75
Selecting the Projector You want to Operate .....................................................75
Matching Multiple-Projector Display Quality .....................................................76
Projector Security Features .............................................................. 78
Password Security Types ................................................................................. 78
Setting a Password ...................................................................................... 78
Selecting Password Security Types ................................................................79
Entering a Password to Use the Projector .......................................................80
Locking the Projector's Buttons ........................................................................80
Unlocking the Projector's Buttons .................................................................81
Installing a Security Cable ............................................................................... 81
Using the Projector on a Network 83
Wireless Network Projection ............................................................ 84
nstalling the Wireless LAN Module ..................................................................84
I
Selecting Wireless Network Settings Manually .................................................. 85
Selecting Wireless Network Settings in Windows ...............................................87
Selecting Wireless Network Settings in Mac ...................................................... 88
Setting Up Wireless Network Security ...............................................................88
Using a QR Code to Connect a Mobile Device ....................................................89
Using a USB Key to Connect a Windows Computer ............................................89
Monitoring and Controlling the Projector 91
Stopping Video Action Temporarily .................................................69
Zooming In/Zooming Out of Images (E-Zoom) ............................... 70
Zooming Into Images ......................................................................................70
Zooming Out of Images .................................................................................. 70
Epson Projector Management Connected / Epson Projector
anagement ......................................................................................92
M
Controlling a Networked Projector Using a Web Browser ..............93
Web Control Options ......................................................................................94
Page 4
Contents
4
Setting Up Projector Network E-Mail Alerts ....................................97
work Projector E-mail Alert Messages ..........................................................97
Net
Setting Up Monitoring Using SNMP .................................................99
Using ESC/VP21 Commands .......................................................... 100
ESC/VP21 Command List ...............................................................................100
Cable Layouts ...............................................................................................100
Web API ............................................................................................ 102
Enabling Web API ......................................................................................... 102
Adjusting the Menu Settings 103
Using the Projector's Menus ...........................................................104
sing the Displayed Keyboard .......................................................105
U
Available Text Using the Displayed Keyboard .................................................. 105
Image Quality Settings - Image Menu ........................................... 106
Input Signal Settings - Signal Menu ...............................................108
Projector Feature Settings - Settings Menu .................................. 109
Copying Menu Settings Between Projectors (Batch Setup) .........126
Transferring Settings From a USB Flash Drive ...................................................126
Transferring Settings From a Computer .......................................................... 127
Batch Setup Error Notication .....................................................................128
Maintaining the Projector 129
Projector Maintenance ....................................................................130
leaning the Lens ............................................................................ 131
C
Cleaning the Projector Case ........................................................... 132
Air Filter and Vent Maintenance .....................................................133
Cleaning the Air Filter and Vents .................................................................... 133
Replacing the Air Filter ..................................................................................133
Projector Lamp Maintenance ......................................................... 136
Replacing the Lamp ......................................................................................136
Resetting the Lamp Timer ..............................................................................139
Solving Problems 140
Projector Setup Settings - Extended Menu ................................... 111
Projector Network Settings - Network Menu ................................ 114
Network Menu - Basic Menu .......................................................................... 115
Network Menu - Wireless LAN Menu ...............................................................116
Network Menu - Notications Menu ...............................................................118
Network Menu - Others Menu ........................................................................119
Network Menu - Reset Menu ..........................................................................120
Projector Setup Settings - ECO Menu .............................................121
Projector Information Display - Info Menu ....................................123
Info Menu - Projector Info Menu .....................................................................123
Event ID Code List ......................................................................................124
Projector Reset Options - Reset Menu ........................................... 125
Projection Problems ........................................................................141
rojector Indicator Status ...............................................................142
P
Using the Projector Help Displays ..................................................145
Solving Image or Sound Problems .................................................146
Solutions When No Image Appears ................................................................ 146
Solutions When Image is Incorrect Using the USB Display Function ...................146
Solutions When "No Signal" Message Appears .................................................147
Displaying From a Laptop ...........................................................................147
Displaying From a Mac Laptop ....................................................................148
Solutions When "Not Supported" Message Appears .........................................148
Solutions When Only a Partial Image Appears ................................................. 148
Solutions When the Image is not Rectangular ................................................. 148
Page 5
Contents
5
Solutions When the Image Contains Noise or Static .........................................149
olutions When the Image is Fuzzy or Blurry ................................................... 149
S
Solutions When the Image Brightness or Colors are Incorrect ...........................150
Solutions to Sound Problems .........................................................................150
Solutions When Image File Names are not Displayed Correctly in PC Free ..........151
Solving Projector or Remote Control Operation Problems ..........152
Solutions to Projector Power or Shut-O Problems ..........................................152
Solutions to Problems with the Remote Control ..............................................152
Solutions to Password Problems .....................................................................153
Solving Network Problems ............................................................. 154
Solutions When Wireless Authentication Fails ..................................................154
Solutions When You Cannot Access the Projector Through the Web ..................154
Solutions When Network Alert E-Mails are not Received ...................................154
Solutions When the Image Contains Static During Network Projection ..............155
Appendix 156
Optional Accessories and Replacement Parts ............................... 157
creens ........................................................................................................157
S
Mounts ........................................................................................................157
For Wireless Connection ................................................................................ 157
External Devices ........................................................................................... 157
Replacement Parts ........................................................................................158
Glossary ............................................................................................177
Notices ..............................................................................................179
FCC Compliance Statement ...........................................................................179
Indication of the manufacturer and the importer in accordance with requirements
of EU directive ..............................................................................................180
Restriction of Use ..........................................................................................180
Operating System References ........................................................................180
Trademarks ..................................................................................................180
Copyright Notice .......................................................................................... 181
Copyright Attribution ....................................................................................181
Screen Size and Projection Distance ..............................................159
Supported Monitor Display Resolutions ....................................... 164
Projector Specications .................................................................. 165
Connector Specications ...............................................................................168
External Dimensions ....................................................................... 169
USB Display System Requirements ................................................173
Warning Label ..................................................................................174
List of Safety Symbols and Instructions ........................................ 175
Page 6
Notations Used in This Guide
afety Symbols
S
e projector and its manuals use graphical symbols and labels to indicate content that tells you how to use the projector safely.
Read and carefully follow the instructions that are marked with these symbols and labels to avoid injury to persons or damage to property.
is sy
mbol indicates information that, if ignored, could possibly result in personal injury or even death.
Warning
mbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
Caution
General Information Notations
Attention
[Button name] Indicates the name of the buttons on the remote control or the projector.
is sy
abel indicates procedures that may result in damage or injury if sucient care is not taken.
is l
is l
abel indicates additional information that may be useful to know.
E
xample: [Esc] button
Menu/Setting name Indicates projector menu and setting names.
E
xample:
Select the Image menu
s Image > Advanced
abel indicates links to the related pages.
is l
is l
s
ed Links
Relat
g
•
"Using the Manual to Search for Information" p.7
•
"Getting the Latest Version of the Documents" p.8
abel indicates the projector's current menu level.
Page 7
Using the Manual to Search for Information
DF manual allows you to search for information you are looking for by
e P
keyword, or jump directly to specic sections using the bookmarks. You can
also print only the pages you need. is section explains how to use a PDF
manual that has been opened in Adobe Reader X on your computer.
Related Links
g
•
"Searching by Keyword" p.7
•
"Jumping Directly from Bookmarks" p.7
•
"Printing Only the Pages You Need" p.7
7
Searching by Keyword
Click Edit > Advanced Search. Enter the keyword (text) for information you
want to nd in the search window, and then click Search. Hits are displayed as a
list. Click one of the displayed hits to jump to that page.
Jumping Directly from Bookmarks
Click a title to jump to that page. Click + or > to view the lower level titles in
t
hat section. To return to the previous page, perform the following operation on
your keyboard.
•
Windows: Hold down Alt, and then press ←.
•
Mac OS: Hold down the command key, and then press ←.
Printing Only the Pages You Need
You can extract and print only the pages you need. Click P
and then specify the pages you want to print in Pages in Pages to Print.
•
To specify a series of pages, enter a hyphen between the start page and the
end page.
Example: 20-25
•
To specify pages that are not in series, divide the pages with commas.
Example: 5, 10, 15
rint in the File menu,
Page 8
Getting the Latest Version of the Documents
8
You can get the latest version of the manuals and s
Web site.
Visit epson.sn, and enter your projector's name.
pecications on the Epson
Page 9
List of Functions
ollowing shows the dierences in the functions supported by each model. Supported functions are indicated by a "✓" mark.
e f
EB-FH08 EB-W55 EB-W53 EB-E24 EB-X52 EB-E12
Resolution Full HD WXGA WXGA XGA XGA XGA
1920×1080 1280×800 1280×800 1024×768 1024×768 1024×768
Wireless LAN (built-in) - ✓ - - - -
Wireless LAN (optional) ✓ - - - ✓ -
External Speaker (optional) - - - ✓ - -
Document camera (optional) ✓ ✓ - - ✓ -
HDMI1/HDMI2 ports ✓ ✓ ✓ - ✓ ✓
HDMI port - - - ✓ - -
Computer1/Computer2 ports - - - ✓ - -
Video port - - - ✓ - -
USB-A (
L-Audio-R ports - - - ✓ - -
Audio 1/Audio 2 ports - - - ✓ - -
Monitor Out port - - - ✓ - -
Audio Out port ✓ - - ✓ - -
RS-232C port - - - ✓ - -
Lens cover ✓ ✓ - ✓ ✓ -
Horizontal keystone slider ✓ ✓ - ✓ ✓ -
Zoom ring ✓ ✓ - - ✓ -
Wireless LAN indicator - ✓ - - - -
[Computer] button (remote control) - - - ✓ - -
) port (USB power supply)
✓ ✓ - - ✓ -
Page 10
EB-FH08 EB-W55 EB-W53 EB-E24 EB-X52 EB-E12
Beep (Power on/Power o
Auto Setup - - - ✓ - -
Overscan - - - ✓ - -
Scene Adaptive Gamma ✓ ✓ ✓ - ✓ ✓
Command Communication ✓ ✓ - - ✓ -
Auto V-Keystone ✓ ✓ - - ✓ -
PC Free ✓ ✓ - - ✓ -
Batch Setup (USB as
Batch Setup (USB cable） ✓ ✓ ✓ ✓ ✓ ✓
Network Protection ✓ ✓ - - ✓ -
Epson iProjection ✓ ✓ - - ✓ -
Epson Projector Management Connected ✓ ✓ - - ✓ -
Epson Projector Management ✓ ✓ - - ✓ -
Epson Web Control ✓ ✓ - - ✓ -
Mail N
otication ✓ ✓ - - ✓ -
SNMP ✓ ✓ - - ✓ -
ESC/VP21 Commands - - - ✓ - -
) ✓ ✓ - - ✓ -
h drive） ✓ ✓ - - ✓ -
Web API ✓ ✓ - - ✓ -
Firmware Update (I
nfo menu) ✓ ✓ - - ✓ -
Page 11
Introduction to Your Projector
efer to these sections to learn more about your projector's features and part names.
R
Related Links
g
•
"Projector Features" p.12
•
"Projector Parts and Functions" p.14
Page 12
Projector Features
rojector comes with these special features. Refer to these sections for more
is p
details.
Related Links
g
•
"Quick and Easy Setup" p.12
•
"Easy Wireless Projection" p.12
Quick and Easy Setup
•
Direct Power On feature to turn on the projector as soon as you plug it in.
•
Auto Power On feature to turn on the projector when the projector detects an
image signal from the port you specied as the Auto Power On source.
•
Home screen feature to easily select an input source and useful functions.
•
Automatic vertical keystone correction always displays a rectangular screen
( Auto V-Keystone).
•
Horizontal keystone slider allows you to quickly correct horizontal distortion
in the projected image.
Easy Wireless Projection
•
E
pson iProjection (Windows/Mac) to project up to four images at the same
time by splitting the projected screen. You can project images from computers
on the network, or from smartphones or tablet devices.
See the Epson iProjection Operation Guide (Windows/Mac) for details.
12
Relat
g
•
•
•
•
•
ed Links
"Turning On the Projector" p.37
"Projector Setup Settings - Extended Menu" p.111
"Correcting the Image Shape with the Horizontal Keystone Slider" p.46
"Auto V-Keystone" p.46
"List of Functions" p.9
You can download the necessary s
following Web site:
http://www.epson.com/
•
E
pson iProjection (iOS/Android) to connect your projector and mobile
device wirelessly using the app available on the App Store or Google Play.
Any fees incurred when communicating with the App Store or Google
lay are the responsibility of the customer.
P
oware and manuals from the
Page 13
Projector Features
•
pson iProjection (Chromebook) to connect your projector and
E
Chromebook device wirelessly using the app available on the Chrome Web
Store.
Any fees incurred when communicating with the Chrome Web Store
ar
e the responsibility of the customer.
ed Links
Relat
g
•
"Using the Projector on a Network" p.83
•
"List of Functions" p.9
13
Page 14
Projector Parts and Functions
14
ollowing sections explain the projector parts and their functions.
e f
All of the features in this guide are explained using illustrations of EB-FH08
unless otherwise mentioned.
Related Links
g
•
"Projector Parts - Front" p.14
•
"Projector Parts - Rear" p.15
•
"Projector Parts - Base" p.17
•
"Projector Parts - Control Panel" p.17
•
"Projector Parts - Remote Control" p.19
•
"List of Functions" p.9
Projector Parts - Front
Name Function
Air exhaust vent Exhaust vent for air used to cool the projector internally.
A
Warning
D
o not look into the vents. If the lamp
explodes, gases may escape and small
fragments of glass may be scattered which
could cause an injury. Contact a doctor if any
fragments of broken glass are inhaled or get
into the eyes or mouth.
Caution
W
hile projecting, do not put your face or hands
near the air exhaust vent, and do not place
objects that may become warped or damaged
by heat near the vent. Hot air from the air
exhaust vent could cause burns, warping, or
accidents to occur.
A/V Mute slide lever Slide the knob to open and close the lens cover.
B
Foot release lever Press the foot release lever to extend and retract the
C
f
ront adjustable foot.
Lens cover Close when not using the projector to protect the lens.
D
Front adjustable foot When the projector is set up on a surface such as a desk,
E
Lens Images are projected from here.
F
Remote receiver Receives signals from the remote control.
G
Horizontal keystone
H
s
lider
Air intake vent (air
I
l
ter)
B
y closing it during projection you can hide the image
and the sound.
ext
end the foot to adjust the position of the image.
Corrects horizontal distortion in the projected image.
Takes in air to cool the projector internally.
Page 15
Projector Parts and Functions
Name Function
ter cover Open to access the air lter.
Air l
J
15
Security slot e s
K
Control panel Operates the projector.
L
Zoom ring Adjusts the image size.
M
Focus ring Adjusts the image focus.
N
Lamp cover Open to access the projector's lamp.
O
ed Links
Relat
g
•
"Resizing the Image with the Zoom Ring" p.50
•
"Focusing the Image Using the Focus Ring" p.51
•
"Projector Indicator Status" p.142
•
"Correcting the Image Shape with the Horizontal Keystone Slider" p.46
•
"List of Functions" p.9
ecurity slot is compatible with the Microsaver
Security System manufactured by Kensington.
e s
hape may vary depending on the model of your
projector.
Projector Parts - Rear
EB-FH08
EB-W55
EB-W53/EB-E12
Page 16
Projector Parts and Functions
16
EB-E24
EB-X52
Name Function
Speaker Outputs audio.
E
HDMI1, HDMI2
F
ports
HDMI port
USB-B port Connects a USB cable to the computer to project
G
USB-A (
H
p
ort
RS-232C port Connects an RS-232C cable to control the projector
I
Video port Inputs composite video signals from video sources.
J
L-Audio-R ports Inputs audio from equipment connected to the Video
K
Inputs video signals from HDMI compatible video
equipment and computers.
is projector is compatible with HDCP.
co
mputer images.
Connects a USB memory device or a digital camera and
)
projects movies or images using PC Free.
Connects the optional document camera.
Connects the wireless LAN module.
Provides a connection for a commercially available
streaming media player allowing you to power it.
f
rom a computer. (You do not need to use this port
normally.)
p
ort.
Name Function
Power inlet Connects the power cord to the projector.
A
Wireless LAN module
B
xin
g screw
Audio Out port Outputs audio from the current input source to an
C
Remote receiver Receives signals from the remote control.
D
Secures the wireless LAN module cover.
ext
ernal speaker.
Monitor Out port Outputs analog RGB signals input from the Computer1
L
Audio 1 port Inputs audio from equipment connected to the
M
Audio 2 port Inputs audio from equipment connected to the
N
Computer2 port Inputs image signals from a computer.
O
Computer1 port Inputs image signals from a computer.
P
Relat
g
•
ed Links
"List of Functions" p.9
p
ort to an external monitor. You cannot output signals
input from other ports.
C
omputer1 port.
C
omputer2 port.
Page 17
Projector Parts and Functions
17
Projector Parts - Base
Name Function
Rear feet When the projector is set up on a surface such as a
C
Front adjustable foot When the projector is set up on a surface such as a desk,
D
Relat
g
•
ed Links
"Installing a Security Cable" p.81
k, turn to extend and retract the feet to adjust the
des
horizontal tilt.
ext
end the foot to adjust the position of the image.
Projector Parts - Control Panel
EB-FH08/EB-X52
Name Function
Ceiling mount xin
A
points (three points)
Security cable
B
at
tachment point
g
Attach the optional ceiling mount here when suspending
the projector from a ceiling.
Pass a commercially available wire lock through here
and lock it in place.
You can also attach the optional safety wire here to
prevent the projector from falling from the ceiling or
wall.
EB-W55
Page 18
Projector Parts and Functions
18
Name Function
EB-W53/EB-E24/EB-E12
[Enter] button [ ]
B
Keystone adjustment
C
b
uttons and arrow
buttons
[Esc] button Stops the current function.
D
Volume buttons and
E
ar
row buttons
[Menu] button Displays and closes the projector's menu.
F
Enters the current selection and moves to the next level
hile displaying the projector's menu or help.
w
Optimizes Tracking, Sync., and Position in the
projector's Signal menu while projecting an analog RGB
signal from the Computer port.
Displays the Keystone screen allowing you to correct
keystone distortion.
Selects menu items while displaying the projector's
menu or help.
M
oves back to the previous menu level while displaying
the projector's menu.
: Decreases the volume.
: Increases the volume.
orrects keystone distortion in the horizontal direction
C
when the Keystone screen is displayed.
Selects menu items while displaying the projector's
menu or help.
Name Function
[Source Search]
A
button
Switches to the next input source.
[Home] button Displays and closes the Home screen.
G
H
Power button [
Indicators Indicates the projector's status.
I
Related Links
g
•
"Input Signal Settings - Signal Menu" p.108
•
"Home Screen" p.38
•
"Projector Indicator Status" p.142
•
"Correcting the Image Shape with the Keystone Buttons" p.47
Turns the projector on or o
]
.
Page 19
Projector Parts and Functions
19
Projector Parts - Remote Control
Name Function
A
Power button [
[HDMI] button Switches the image source between the HDMI ports.
B
[Computer] button Switches the image source to the Computer ports.
C
Numeric buttons Enters numbers in the projector's menu while holding
D
[Auto] button Optimizes T
E
[Num] button Hold down this button to enter numbers using the
F
[Menu] button Displays and closes the projector's menu.
G
Arrow buttons Selects menu items while displaying the projector's
H
[Enter] button [
I
[User] button Performs settings assigned in the U
J
Turns the projector on or o
]
s button may not be available depending on the
i
model you are using.
do
wn the [Num] button.
racking, Sync., and Position in the
projector's Signal menu while projecting an analog RGB
signal from the Computer ports.
n
umeric buttons.
m
enu.
Enters the current selection and moves to the next level
]
w
hile displaying the projector's menu.
the projector's Settings menu.
.
ser Button setting in
[Color Mode] button Changes the color mode.
K
[Aspect] button Changes the aspect mode.
L
[E-Zoom] +/– buttons Resizes the projected image.
M
[A/V Mute] button Turns the video and audio on or o
N
[Split] button Projects two images from dier
O
[Home] button Displays and closes the Home screen.
P
[Freeze] button Pauses or resumes images.
Q
simultaneously by splitting the projected screen.
temporarily.
ent image sources
Page 20
Projector Parts and Functions
Name Function
20
[Volume] up/down
R
uttons
b
[Default] button Returns the selected setting to its default value.
S
[Esc] button Stops the current function.
T
[ID] button Hold down this button and press the numeric buttons to
U
[LAN] button Switches the image source between the network
V
[USB] button Switches the image source between the USB Display and
W
[Source Search]
X
b
utton
Remote control light
Y
emi
tting area
ed Links
Relat
g
•
"Input Signal Settings - Signal Menu" p.108
•
"Image Aspect Ratio" p.53
•
"Projector Setup Settings - Extended Menu" p.111
•
"Projecting a PC Free Presentation" p.63
•
"Projecting Two Images Simultaneously" p.60
•
"Adjusting Image Quality (Color Mode)" p.56
•
"Using the Projector on a Network" p.83
•
"Connecting to a Computer for USB Video and Audio" p.26
•
"Home Screen" p.38
Adjusts the speaker volume.
M
oves back to the previous menu level while displaying
the projector's menu.
s
elect the ID for the projector you want to operate using
the remote control.
co
nnected devices.
US
B-A port.
Switches to the next input source.
Outputs remote control signals.
Page 21
Setting Up the Projector
ollow the instructions in these sections to set up your projector.
F
Related Links
g
•
"Projector Placement" p.22
•
"Projector Connections" p.25
•
"Installing Batteries in the Remote Control" p.33
•
"Remote Control Operation" p.34
•
"Opening the Lens Cover" p.35
Page 22
Projector Placement
22
You can place the projector on almost any at s
urface to project an image.
You can also install the projector in a ceiling mount if you want to use it in
a xed location. An optional ceiling mount is required when suspending the
projector from a ceiling.
Note the following points when selecting a projector location:
•
Place the projector on a sturdy, level surface or install it using a compatible
mount.
•
L
eave plenty of space around and under the projector for ventilation, and do
not place it on top of or next to anything that could block the vents.
•
Place the projector so it squarely faces the screen, not at an angle.
If you cannot install the projector squarely facing the screen, correct
an
y resulting keystone distortion using the projector controls. For the
best quality images, we recommend adjusting the installation position
of the projector to achieve the correct image size and shape.
Warning
•
Y
ou must install a ceiling mount when suspending the projector from a ceiling. If
you do not install the projector correctly, it could fall and cause damage or injury.
•
Do not use adhesives on the ceiling mount xing points to prevent the screws
from loosening, or use lubricants, oils, or similar substances on the projector; the
projector case may crack causing it to fall from its ceiling mount. is could cause
serious injury to anyone under the ceiling mount and could damage the projector.
•
Failure to install the ceiling mount and projector may cause the projector to fall.
Aer installing the specic Epson mount that supports your projector, make sure
you secure the mount to all of the projector's ceiling mount xing points. Also,
secure the projector and the mounts using wire that is strong enough to hold their
weight.
•
Do not install the projector in a location subject to high levels of dust or humidity,
or in a location subject to smoke or steam. Otherwise, it could cause a re
or electric shock to occur. e projector's case could also deteriorate and be
damaged causing the projector to fall from the mount.
Examples of environments that could cause the projector to fall due to case
deterioration
•
Locations subject to excessive smoke or airborne oil particles, such as factories
or kitchens
•
Locations containing volatile solvents or chemicals, such as factories or
laboratories
•
Locations where the projector could be subjected to detergents or chemicals,
such as factories or kitchens
•
Locations in which aroma oils are oen used, such as relaxation rooms
•
Near devices that produce excessive smoke, airborne oil particles, or foam at
events
Page 23
Projector Placement
23
Warning
•
D
o not cover the projector's air intake or air exhaust vents. If the vents are
covered, the internal temperature could rise and cause a re.
•
Do not use or store the projector in locations where it will be subject to dust or
dirt. Otherwise, the quality of the projected image may decline, or the air lter
may become clogged, resulting in a malfunction or re.
•
Do not install the projector on an unstable surface or in a location beyond the
weight specications of the projector. Otherwise, it could fall or topple causing an
accident and injury.
•
When installing the projector in a high position, take measures to prevent falling
by using wires to ensure safety in an emergency, such as an earthquake, and to
prevent accidents. If it is not installed correctly, it could fall causing an accident
and injury.
•
Do not install in locations where salt damage could occur, or in locations subject
to corrosive gas such as sulphuric gas from hot springs. Otherwise, corrosion
could cause the projector to fall. It could also cause the projector to malfunction.
Attention
•
D
o not operate the projector on its side. is may cause the projector to
malfunction.
•
If you are using the projector at altitudes above 1,500 m, set the High Altitude
Mode setting to On in the projector's menu to ensure the projector's internal
temperature is regulated properly.
s Extended > Operation > High Altitude Mode
•
Try not to setup the projector in locations subject to high humidity and dust, or in
locations subject to smoke from res or tobacco smoke.
Projector Setup and Installation Options
You can set up or install your projector in the following ways:
F
ront/Rear
Front Ceiling/Rear Ceiling
Make sure you select the correct P
menu according to the installation method being used.
Related Links
g
•
"Projection Modes" p.42
rojection option in the projector's Extended
Relat
g
•
•
•
•
ed Links
"Projector Setup and Installation Options" p.23
"Projection Distance" p.23
"Image Shape" p.46
"Projector Setup Settings - Extended Menu" p.111
Projection Distance
e di
stance at which you place the projector from the screen determines the
approximate size of the image. e image size increases the farther the projector
Page 24
Projector Placement
is from the screen, but can vary depending on the zoom factor, aspect ratio, and
ther settings.
o
See the Appendix for details about how far to place the projector from the
screen based on the size of the projected image.
When correcting keystone distortion, your image is slightly smaller.
24
Related Links
g
•
"Screen Size and Projection Distance" p.159
Page 25
Projector Connections
25
See these sections to connect the projector to a variety of projection sources.
Attention
C
heck the shape and orientation of the connectors on any cable you plan to connect.
Do not force a connector into a port if it does not t. e device or your projector
could be damaged or could malfunction.
See the Q
Purchase optional or commercially available cables when necessary.
ed Links
Relat
g
•
"Connecting to a Computer" p.25
•
"Connecting to Video Sources" p.27
•
"Connecting to External USB Devices" p.29
•
"Connecting to a Document Camera" p.30
•
"Connecting to External Devices" p.30
uick Start Guide for a list of cables supplied with your projector.
Connecting to a Computer
•
T
o connect a computer that does not have a VGA video port, you need
an adapter that allows you to connect to the projector's VGA video
port.
•
You can also set the port used for audio input in the projector's
Extended menu.
s Extended > A/V Settings > Audio Settings > Audio Output
•
Make sure the audio cable is labeled "No resistance".
Connect the VGA computer cable to your computer's monitor port.
a
Connect the other end to a Computer port on the projector.
b
Follow the instructions in these sections to connect a computer to the projector.
Relat
g
•
•
•
ed Links
"Connecting to a Computer for VGA Video and Audio" p.25
"Connecting to a Computer for USB Video and Audio" p.26
"Connecting to a Computer for HDMI Video and Audio" p.27
Connecting to a Computer for VGA Video and Audio
ou can connect the projector to your computer using a VGA computer cable.
Y
You can play sound through the projector's speaker system by connecting a
commercially available 3.5 mm stereo mini-jack audio cable.
Tighten the screws on the VGA connector.
c
Connect the audio cable to your laptop's headphone or audio-out jack, or
d
y
our desktop's speaker or audio-out port.
Page 26
Projector Connections
26
Connect the other end to the Audio port that corresponds to the
e
C
omputer port you are using.
ed Links
Relat
g
•
"Projector Setup Settings - Extended Menu" p.111
•
"List of Functions" p.9
Connecting to a Computer for USB Video and Audio
f your computer meets the system requirements, you can send video and audio
I
output to the projector through the computer's USB port. is function is called
USB Display. Connect the projector to your computer using a USB cable.
If you use a USB hub, the connection may not operate correctly. Connect
t
he USB cable directly to the projector.
Connect the cable to your projector's USB-B port.
a
Connect the other end to any available USB port on your computer.
b
Turn on the projector and your computer.
c
Do one of the following to install the Epson USB Display s
d
You only need to install this soware the rst time you connect the
projector to the computer.
•
W
indows: Select Run EMP_UDSE.EXE in the dialog box that is
displayed to install the Epson USB Display soware.
•
Mac: e Epson USB Display setup folder is displayed on your screen.
Select USB Display Installer and follow the on-screen instructions to
install the Epson USB Display soware. If the USB Display Setup folder
is not displayed automatically, double-click EPSON_PJ_UD > USB
Display Installer.
oware:
Follow any on-screen instructions.
e
D
o not disconnect the USB cable or turn o the projector until the
projector displays an image.
Page 27
Projector Connections
rojector displays the image from your computer's desktop and outputs
e p
sound if your presentation contains audio.
•
I
f the projector does not project any images, do one of the following:
•
Windows: Click All Programs > EPSON Projector > Epson USB
Display > Epson USB Display Ver.x.xx.
•
Mac: Double-click the USB Display icon in the Application folder.
•
When you nish projection, do one of the following:
•
Windows: Disconnect the USB cable. You do not need to operate
Safely Remove Hardware.
•
Mac: Select Disconnect from the USB Display icon menu on the
menu bar or Dock, and then disconnect the USB cable.
Relat
g
•
•
ed Links
"USB Display System Requirements" p.173
"List of Functions" p.9
Connect the other end to the projector's HDMI port.
b
If you have problems hearing audio through the HDMI connection,
connect one end of a commercially available 3.5 mm stereo mini-jack
audio cable to the projector's Audio port and the other end to your
computer's audio out port. Select the audio input port you connected to in
the projector's Extended menu.
s Extended > A/V Settings > Audio Settings > HDMI1 Audio Output
27
Connecting to a Computer for HDMI Video and Audio
f your computer has an HDMI port, you can connect it to the projector using
I
an HDMI cable and send the computer's audio with the projected image.
To connect a Mac that does not have an HDMI port, you need an adapter
hat allows you to connect to the projector's HDMI port. Contact Apple
t
for compatible adapter options. Older Mac computers (2009 and earlier)
may not support audio through the HDMI port.
Connect the HDMI cable to your computer's HDMI output port.
a
ed Links
Relat
g
•
"Projector Setup Settings - Extended Menu" p.111
•
"List of Functions" p.9
Connecting to Video Sources
Follow the instructions in these sections to connect video devices to the
rojector.
p
Page 28
Projector Connections
28
•
I
f the port on the device you connect has an unusual shape, use the
cable supplied with the device or an optional cable to connect to the
projector.
•
e cable diers depending on the output signal from the connected
video devices.
•
Some video devices are capable of outputting dierent types of signals.
See your video device manual to conrm what type of signals can be
output.
Relat
g
•
•
ed Links
"Connecting to an HDMI Video Source" p.28
"Connecting to a Composite Video Source" p.28
Connecting to an HDMI Video Source
f your video source has an HDMI port, you can connect it to the projector
I
using an HDMI cable and send the image source's audio with the projected
image.
Attention
o not turn on the video source before connecting it to the projector. Doing so could
D
damage the projector.
Connect the other end to the projector's HDMI port.
b
If you have problems hearing audio through the HDMI connection,
connect one end of a commercially available 3.5 mm stereo mini-jack
audio cable to the projector's Audio port and the other end to your video
source's audio out port. Select the audio input port you connected to in
the projector's Extended menu. (Available only for models that have the
Audio port.)
s Extended > A/V Settings > Audio Settings > HDMI Audio Output
ed Links
Relat
g
•
"Projector Setup Settings - Extended Menu" p.111
•
"List of Functions" p.9
Connect the HDMI cable to your video source's HDMI output port.
a
Connecting to a Composite Video Source
I
f your video source has a composite video port, you can connect it to the
projector using a RCA-style video or A/V cable.
You can play sound through the projector's speaker system by connecting a
commercially available RCA audio cable.
Make sure the audio cable is labeled "No resistance".
Page 29
Projector Connections
29
Connect the cable with the yellow connector to your video source's yellow
a
v
ideo output port.
Connect the other end to the projector's Video port.
b
Connect the audio cable to your video source's audio-out ports.
c
Connect the other end to the projector's L-Audio-R ports.
d
ed Links
Relat
g
•
"List of Functions" p.9
Connecting to External USB Devices
Follow the instructions in these sections to connect external USB devices to the
p
rojector.
Related Links
g
•
"USB Device Projection" p.29
•
"Connecting to a USB Device" p.30
•
"Disconnecting a USB Device" p.30
USB Device Projection
You can project images and other content without using a computer or video
device by connecting any of these devices to your projector:
•
USB ash drive
•
Digital camera or smartphone
•
USB hard drive
•
ital cameras or smartphones must be USB-mounted devices, not
Dig
TWAIN-compliant devices, and must be USB Mass Storage Classcompliant.
•
USB hard drives must meet these requirements:
•
USB Mass Storage Class-compliant (not all USB Mass Storage Class
devices are supported)
•
Formatted in FAT16/32
•
Self-powered by their own AC power supplies (bus-powered hard
drives are not recommended)
•
Avoid using hard drives with multiple partitions
You can project slide shows from image les o
n a connected USB device.
Page 30
Projector Connections
30
ed Links
Relat
g
•
"Projecting a PC Free Presentation" p.63
•
"List of Functions" p.9
Connecting to a USB Device
ou can connect your USB device to the projector's USB-A port and use it to
Y
project images and other content.
If your USB device came with a power adapter, plug the device into an
a
e
lectrical outlet.
Connect the USB cable or USB as
b
shown.
h drive to the projector's USB-A port as
Relat
g
•
Disconnecting a USB Device
W
the device from the projector.
a
b
C
onnecting to a Document Camera
You can connect a document camera to your projector to project images viewed
y the camera.
b
e connection method varies depending on your Epson document camera
model. See the document camera manual for details.
ed Links
"List of Functions" p.9
hen you have nished presenting with a connected USB device, disconnect
Turn o
and unplug the device, if necessary.
Disconnect the USB device from the projector.
Attention
•
se the USB cable supplied with or specied for use with the device.
U
•
Do not connect a USB hub or a USB cable longer than 3 meters, or the
device may not operate correctly.
Connect the other end to your device, if necessary.
c
Related Links
g
•
"List of Functions" p.9
Connecting to External Devices
Follow the instructions in these sections to connect external devices to the
p
rojector.
Related Links
g
•
"Connecting to a VGA Monitor" p.31
•
"Connecting to External Speakers" p.31
•
"Connecting to a Streaming Media Player" p.32
Page 31
Projector Connections
Connecting to a VGA Monitor
f you connected the projector to a computer using a Computer port, you
I
can also connect an external monitor to the projector. is lets you see your
presentation on the external monitor even when the projected image is not
visible.
•
I
f you want to output images to an external monitor when the projector
is turned o, select Always On as the A/V Output setting in the
projector's Extended menu.
s Extended > A/V Settings > A/V Output
•
Monitors that use a refresh rate of less than 60 Hz may not be able to
display images correctly.
Make sure your computer is connected to the projector's Computer port.
a
•
I
f there are two computer ports, make sure you use the
Computer1 port.
•
Only analog RGB signals from the Computer1 port can be
output to an external monitor. You cannot output signals input
from other ports.
ed Links
Relat
g
•
"Projector Setup Settings - Extended Menu" p.111
•
"List of Functions" p.9
Connecting to External Speakers
o enhance the sound from your presentation, you can connect the projector to
T
external self-powered speakers. You can control the volume using the projector's
remote control.
•
I
f you want to output audio from the external speakers when the
projector is turned o, select Always On as the A/V Output setting in
the projector's Extended menu.
s Extended > A/V Settings > A/V Output
•
You can also connect the projector to an amplier with speakers.
•
e projector's built-in speaker system is disabled when you connect
external speakers.
Make sure your computer or video source is connected to the projector
a
w
ith both audio and video cables as necessary.
31
Connect the external monitor's cable to your projector's Monitor Out
b
p
ort.
Locate the appropriate cable to connect your external speakers, such as a
b
s
tereo mini-jack-to-pin-jack cable, or another type of cable or adapter.
Connect one end of the cable to your external speakers as necessary.
c
Page 32
Projector Connections
32
Connect the stereo mini-jack end of the cable to your projector's Audio
d
O
ut port.
ed Links
Relat
g
•
"Projector Setup Settings - Extended Menu" p.111
•
"List of Functions" p.9
Connecting to a Streaming Media Player
Y
ou can connect your streaming media player to the projector's HDMI port. By
connecting the power supply USB cable, you can power the streaming media
player from the projector.
Connect your streaming media player to the projector's HDMI port.
a
Connect the power supply USB cable to the projector's USB-A port.
b
Connect the other end to the streaming media player.
c
e co
nnection method and operating environment for the streaming
media player vary depending on the model you are using. For details, see
the documentation supplied with your streaming media player; otherwise,
it may not operate properly.
Page 33
Installing Batteries in the Remote Control
emote control uses the two AA batteries that came with the projector.
e r
Attention
M
ake sure you read the Safety Instructions before handling the batteries.
Remove the battery cover as shown.
a
Remove the old batteries, if necessary.
b
Dispose of used batteries according to local regulations.
Insert the batteries with the + an
c
Warning
heck the positions of the (+) and (–) marks inside the battery holder to
C
ensure the batteries are inserted the correct way. If the batteries are not used
correctly, they could explode or leak causing a re, injury, or damage to the
product.
33
d – ends facing as shown.
Replace the battery cover and press it down until it clicks into place.
d
Page 34
Remote Control Operation
emote control lets you control the projector from almost anywhere in the
e r
room.
Make sure that you aim the remote control at the projector's receivers within the
distance and angles listed here.
EB-FH08/EB-W55/EB-X52
34
EB-W53/EB-E24/EB-E12
Avoid using the remote control in conditions with bright uo
or in direct sunlight, or the projector may not respond to commands. If
you are not going to use the remote control for a long time, remove the
batteries.
rescent lights
Page 35
Opening the Lens Cover
To open the projector's lens cover, slide the A/V Mute slide lever until it
a
c
licks.
35
To cover the lens or temporarily turn o
b
close the lens cover.
rojector's power automatically turns o 30 minutes aer A/V Mute is
e p
enabled. You can disable this feature.
s ECO > Lens Cover Timer
Relat
g
•
ed Links
"List of Functions" p.9
the projected image and sound,
Page 36
Using Basic Projector Features
ollow the instructions in these sections to use your projector's basic features.
F
Related Links
g
•
"Turning On the Projector" p.37
•
"Turning O the Projector" p.40
•
"Selecting the Language for the Projector Menus" p.41
•
"Projection Modes" p.42
•
"Displaying a Test Pattern" p.44
•
"Adjusting the Image Height" p.45
•
"Image Shape" p.46
•
"Resizing the Image with the Zoom Ring" p.50
•
"Focusing the Image Using the Focus Ring" p.51
•
"Selecting an Image Source" p.52
•
"Image Aspect Ratio" p.53
•
"Adjusting Image Quality (Color Mode)" p.56
•
"Controlling the Volume with the Volume Buttons" p.58
Page 37
Turning On the Projector
37
Turn on the computer or video equipment you want to use aer y
projector.
Connect the power cord to the projector's power inlet and plug it into an
a
e
lectrical outlet.
e p
rojector's power indicator turns blue. is indicates that the
projector is receiving power, but is not yet turned on (it is in standby
mode).
ou turn on the
Open the projector's lens cover.
c
Try the following if you do not see a projected image.
•
V
erify the lens cover is open all the way.
•
Turn on the connected computer or video device.
•
Change the screen output from the computer when using a laptop computer.
•
Insert a DVD or other video media, and press play (if necessary).
•
Press the [Source Search] button on the control panel or remote control to
detect the source.
•
Press the button for the desired video source on the remote control.
•
If the Home screen is displayed, select the source you want to project.
Press the power button on the control panel or remote control to turn on
b
t
he projector.
e projector beeps and the status indicator ashes blue as the projector
warms up. Once the projector is warmed up, the status indicator stops
ashing and turns blue.
Page 38
Turning On the Projector
Warning
•
N
ever look into the projector lens when the lamp is on. is can damage your
eyes and is especially dangerous for children.
•
When turning on the projector at a distance using the remote control, make sure
there is no one looking into the lens.
•
During projection, do not block the light from the projector with a book or
other objects. If the light from the projector is blocked, the area on which the
light shines becomes hot which could cause it to melt, burn, or start a re. Also,
the lens may get hot due to the reected light which could cause the projector
to malfunction. To stop projection, use the A/V Mute function, or turn o the
projector.
•
A mercury lamp with high internal pressure is used as the projector's light source.
If the lamp is subjected to vibrations or shocks, or if it is used for an overly
extended length of time, the lamp may break or it may not turn on. If the lamp
explodes, gases may escape and small fragments of glass may be scattered which
could cause an injury. Be sure to observe the instructions below.
•
Do not disassemble or damage the lamp or subject it to any impacts.
•
Do not bring your face close to the projector while it is in use.
•
Particular care should be taken when the projector is installed to a ceiling, as
small pieces of glass may fall down when the lamp cover is removed. When
cleaning the projector or replacing the lamp yourself, be very careful not to
allow such pieces of glass to get into the eyes or mouth.
If the lamp breaks, ventilate the area immediately, and contact a doctor if any
fragments of broken glass are inhaled or get into the eyes or mouth.
•
W
hen the Direct Power On setting is set to On in the projector's
Extended menu, the projector turns on as soon as you plug it in. Note
that the projector also turns on automatically in cases such as recovery
from a power outage.
s Extended > Operation > Direct Power On
•
If you select a specic port as the Auto Power On setting in the
projector's Extended menu, the projector turns on as soon as it detects
a signal or cable connection from that port.
s Extended > Operation > Auto Power On
Relat
g
•
•
•
ed Links
"Home Screen" p.38
"Projector Setup Settings - Extended Menu" p.111
"List of Functions" p.9
Home Screen
e H
ome screen feature allows you to easily select an image source and
access useful functions. You can display the Home screen by pressing the
[Home] button on the control panel or remote control. e Home screen is
also displayed when you turn on the projector and no signal is being input.
Press the arrow buttons on the control panel or remote control to select a menu
item, and then press [Enter].
38
Page 39
Turning On the Projector
Selects the source you want to project.
A
Displays the Connection Guide. You can select the wireless connection methods
B
C
D
E
F
G
rding to the devices you are using, such as smartphones or computers.
acco
Displays the Help screen.
Displays the projector's menu.
Performs menu options assigned to Home Screen in the projector's Extended
menu.
Projects two images from dierent image sources simultaneously by splitting the
projected screen.
Corrects the shape of an image that is an uneven rectangle.
•
sing the Projector's Menus" p.104
"U
•
"Using the Projector Help Displays" p.145
•
"Projecting Two Images Simultaneously" p.60
•
"List of Functions" p.9
39
ome screen disappears aer 10 minutes of inactivity.
e H
ed Links
Relat
g
•
"Image Shape" p.46
•
"Projector Setup Settings - Extended Menu" p.111
Page 40
Turning O
the projector aer use.
Turn o
•
•
Press the power button on the control panel or remote control.
a
e p
rojector displays a shutdown conrmation screen.
the Projector
T
urn o this product when it is not in use to prolong the life
of the projector. Lamp life varies depending on the mode selected,
environmental conditions, and usage. Brightness decreases over time.
Since the projector supports the direct shutdown feature, it can be
turned o directly using the breaker.
Relat
g
•
ed Links
"List of Functions" p.9
40
Press the power button again. (To leave it on, press any other button.)
b
e p
rojected image disappears, the projector beeps twice, and the status
indicator turns o.
With Epson's Instant O t
so you can pack up the projector for transport right away.
To transport or store the projector, make sure the power indicator is blue
c
d
ut not ashing) and the status indicator is o, then unplug the power
(b
cord.
Close the projector's lens cover.
echnology, there is no cool-down period
Page 41
Selecting the Language for the Projector Menus
If you want to view the projector's menus and messages in another language,
ou can change the Language setting.
y
Turn on the projector.
a
Press the [Menu] button on the control panel or remote control.
b
41
Select the E
c
Select the L
d
Select the language you want to use and press [Enter].
e
Press [Menu] or [Esc] to exit the menus.
f
xtended menu and press [Enter].
anguage setting and press [Enter].
Page 42
Projection Modes
42
Depending on how you positioned the projector, you may need to change the
rojection mode so your images project correctly.
p
•
Front lets you project from a table in front of the screen.
•
Front/Ceiling ips the image over top-to-bottom to project upside-down
from a ceiling or wall mount.
•
Rear ips the image horizontally to project from behind a translucent screen.
•
Rear/Ceiling ips the image over top-to-bottom and horizontally to project
from a ceiling or wall mount and behind a translucent screen.
Related Links
g
•
"Changing the Projection Mode Using the Remote Control" p.42
•
"Changing the Projection Mode Using the Menus" p.42
•
"Projector Setup and Installation Options" p.23
Changing the Projection Mode Using the Remote Control
You can change the projection mode to ip the image over top-to-bottom.
To change projection back to the original mode, hold down the [A/V
c
M
ute] button for 5 seconds again.
Changing the Projection Mode Using the Menus
You can change the projection mode to i
and/or le-to-right using the projector menus.
Turn on the projector and display an image.
a
Press the [Menu] button on the control panel or remote control.
b
c
Select the E
xtended menu and press [Enter].
p the image over top-to-bottom
Turn on the projector and display an image.
a
Hold down the [A/V Mute] button on the remote control for 5 seconds.
b
e im
age disappears briey and reappears ipped top-to-bottom.
Page 43
Projection Modes
43
Select P
d
Select a projection mode and press [Enter].
e
Press [Menu] or [Esc] to exit the menus.
f
rojection and press [Enter].
Page 44
Displaying a Test Pattern
You can display a test pattern to adjust the projected image without connecting
mputer or video device.
a co
To set menu items that cannot be set while the test pattern is being
di
splayed or to ne-tune the projected image, project an image from the
connected device.
Turn on the projector.
a
Press the [Menu] button on the control panel or remote control.
b
44
Select the S
c
Select P
d
e test pattern is displayed.
Adjust the image as necessary.
e
Press [Esc] to clear the test pattern.
f
ettings menu and press [Enter].
attern > Test Pattern, and press [Enter].
Page 45
Adjusting the Image Height
If you are projecting from a table or other at surface and the image is too high
or low, you can adjust the image height using the projector's adjustable feet.
e larger the angle of tilt, the harder it becomes to focus. Locate the projector
so that it only needs to be tilted at a small angle.
Extend the rear foot
A
Retract the rear foot
B
If the projected image is unevenly rectangular, you need to adjust the image
shape.
45
Turn on the projector and display an image.
a
To adjust the front foot, pull up on the foot release lever and li the front
b
of the projector.
e foot extends from the projector.
You can adjust the position up to approximately 12 degrees.
Release the lever to lock the foot.
c
If the image is tilted, rotate the rear feet to adjust their height.
d
Related Links
g
•
"Image Shape" p.46
Page 46
Image Shape
46
You can project an even, rectangular image by placing the projector directly in
ront of the center of the screen and keeping it level. If you place the projector at
f
an angle to the screen, or tilt it up or down, or o to the side, you may need to
correct the image shape.
Aer correction, your image is slightly smaller.
For the best quality images, we recommend adjusting the installation position of
the projector to achieve the correct image size and shape.
Related Links
g
•
"Auto V-Keystone" p.46
•
"Correcting the Image Shape with the Horizontal Keystone Slider" p.46
•
"Correcting the Image Shape with the Keystone Buttons" p.47
•
"Correcting the Image Shape with Quick Corner" p.48
Auto V-Keystone
When the projector is moved or tilted, Auto V-Keystone automatically corrects
any vertical keystone distortion.
Auto V-Keystone can correct the projected image distortion in these
conditions:
•
Projection angle is about 30º up or down
•
e Projection setting is set to Front in the projector's Extended menu
If you do not want to use the A
Keystone to O in the projector's menu.
s Settings > Keystone > H/V-Keystone > Auto V-Keystone
Relat
g
•
•
•
•
ed Links
"Projection Modes" p.42
"Projector Setup Settings - Extended Menu" p.111
"Projector Feature Settings - Settings Menu" p.109
"List of Functions" p.9
uto V-Keystone function, set Auto V-
Correcting the Image Shape with the Horizontal
eystone Slider
K
You can use the projector's horizontal keystone slider to correct the shape of
an im
age that is an uneven horizontal rectangle, such as when the projector is
placed to the side of the projection area. (Available only for models that have the
horizontal keystone slider.)
You can make eective corrections when the projection angle is about 30º right
or le.
Turn on the projector and display an image.
a
Adjust the slider until the image is an even rectangle.
b
Aer co
Relat
g
•
"Projector Feature Settings - Settings Menu" p.109
•
"List of Functions" p.9
rrection, your image is slightly smaller.
•
When you use the horizontal keystone slider, set H-Keystone
Adjuster to On in the projector's Settings menu.
s Settings > Keystone > H/V-Keystone > H-Keystone
Adjuster
•
You can also correct the shape of the image in the horizontal
direction in the projector's Settings menu.
s Settings > Keystone > H/V-Keystone
ed Links
Page 47
Image Shape
47
Correcting the Image Shape with the Keystone Buttons
You can use the projector's keystone correction buttons to correct the shape of
an im
age that is unevenly rectangular.
You can use keystone buttons to correct images up to 30º right, le, up, or down.
Turn on the projector and display an image.
a
Press one of the keystone adjustment buttons on the control panel to
b
di
splay the Keystone adjustment screen.
Press a keystone button to adjust the image shape.
c
If the projector is installed out of your reach, you can also correct the
hape of the image using the remote control.
s
s Settings > Keystone > H/V-Keystone
Relat
g
•
ed Links
"Projector Feature Settings - Settings Menu" p.109
Page 48
Image Shape
48
Correcting the Image Shape with Quick Corner
You can use the projector's Q
of an image that is unevenly rectangular.
Turn on the projector and display an image.
a
Press the [Menu] button on the control panel or remote control.
b
c
Select the S
ettings menu and press [Enter].
uick Corner setting to correct the shape and size
Select K
d
Select Q
e
necessary.
You see the area selection screen.
Use the arrow buttons to select the corner of the image you want to adjust.
f
en p
eystone and press [Enter].
uick Corner and press [Enter]. en press [Enter] again if
ress [Enter].
Press the arrow buttons to adjust the image shape as necessary.
g
To return to the area selection screen, press [Enter].
Page 49
Image Shape
•
•
I
f you see this screen, you cannot adjust the shape any further in
the direction indicated by the gray triangle.
T
o reset the Quick Corner corrections, hold down [Esc] for
about 2 seconds while the Quick Corner adjustment screen is
displayed, and select Reset Quick Corner. Select Switch to H/
V-Keystone to switch the image shape correction method to
H/V-Keystone.
ed Links
Relat
g
•
"Projector Feature Settings - Settings Menu" p.109
49
Repeat steps 6 and 7 as needed to adjust any remaining corners.
h
When you are ni
i
e Keystone setting is now set to Quick Corner in the projector's Settings
menu. e next time you press the keystone adjustment buttons on the control
panel, the area selection screen is displayed.
shed, press [Esc].
Page 50
Resizing the Image with the Zoom Ring
You can resize the image using the projector's zoom ring. (Available only for
odels that have the zoom ring.)
m
Turn on the projector and display an image.
a
Rotate the zoom ring to enlarge or reduce the image.
b
Relat
g
•
ed Links
"List of Functions" p.9
50
Page 51
Focusing the Image Using the Focus Ring
You can correct the focus using the focus ring.
Turn on the projector and display an image.
a
Rotate the focus ring to adjust the focus.
b
51
Page 52
Selecting an Image Source
When multiple image sources are connected to the projector, such as a
mputer and DVD player, you can switch from one image source to the other.
co
Available sources vary depending on the projector model.
Make sure the connected image source you want to use is turned on.
a
For video image sources, insert a DVD or other video media and press
b
p
lay.
Do one of the following:
c
•
P
ress the [Source Search] button on the control panel or remote control
until you see the image from the source you want.
•
ress the button for the source you want on the remote control. If there
P
is more than one port for that source, press the button again to cycle
through the sources.
•
Press the [Home] button on the control panel or remote control.
en s
elect the source you want to use from the screen displayed.
52
creen is displayed when no image signal is detected. Check
is s
the cable connections between the projector and image source.
ed Links
Relat
g
•
"List of Functions" p.9
Page 53
Image Aspect Ratio
rojector can display images in dierent width-to-height ratios called
e p
aspect ratios. Normally, the input signal from your video source determines
the image's aspect ratio. However, for certain images you can change the aspect
ratio to t your screen.
If you always want to use a particular aspect ratio for a certain video input
source, you can select it using the projector's Signal menu.
Related Links
g
•
"Changing the Image Aspect Ratio" p.53
•
"Available Image Aspect Ratios" p.53
•
"Projected Image Appearance with Each Aspect Mode" p.54
•
"Input Signal Settings - Signal Menu" p.108
To display images without black bars, set R
in the projector’s Signal menu according to the computer’s resolution.
ed Links
Relat
g
•
"Input Signal Settings - Signal Menu" p.108
esolution to Wide or Normal
Available Image Aspect Ratios
You can select the following image aspect ratios, depending on the input signal
rom your image source.
f
53
Changing the Image Aspect Ratio
You can change the aspect ratio of the displayed image.
Turn on the projector and switch to the image source you want to use.
a
Press the [Aspect] button on the remote control.
b
hape and size of the displayed image changes, and the name of the
e s
aspect ratio appears briey on the screen.
To cycle through the available aspect ratios for your input signal, press the
c
[A
spect] button repeatedly.
•
e avai
•
Note that using the aspect ratio function of the projector to reduce,
enlarge, or split the projected image for commercial purposes or for
public viewing may infringe upon the rights of the copyright holder of
that image based on copyright law.
For projectors with a resolution of Full HD (1920 × 1080) or WXGA (1280 ×
800)
Aspect mode Description
Auto Automatically sets the aspect ratio according to the
16:9 * Converts the aspect ratio of the image to 16:9.
Full Displays images using the full size of the projection
Zoom Displays images using the full width of the projection
Native Displays images as is (aspect ratio and resolution are
lable aspect ratio setting varies depending on the input signal.
in
put signal and the Resolution setting.
ar
ea, but does not maintain the aspect ratio.
ar
ea and maintains the aspect ratio of the image.
m
aintained).
Page 54
Image Aspect Ratio
54
* Available only for projectors with a resolution of WXGA (1280 × 800).
or projectors with a resolution of XGA (1024 × 768)
F
Aspect mode Description
Auto Automatically sets the aspect ratio according to the
put signal and the Resolution setting.
in
Normal Displays images using the full projection area and
m
aintains the aspect ratio of the image.
4:3 Converts the aspect ratio of the image to 4:3.
16:9 Converts the aspect ratio of the image to 16:9.
Relat
g
•
ed Links
"List of Functions" p.9
Projected Image Appearance with Each Aspect Mode
Black bands and cropped images may project in certain aspect ratios, depending
n the aspect ratio and resolution of your input signal. See the following table to
o
conrm the position of black bands and cropped images.
For projectors with a resolution of Full HD (1920 × 1080) or WXGA (1280 ×
800)
Aspect mode Aspect ratio for input signals
16:10 16:9 4:3
Auto
16:9 *
Full
Zoom
Native
* Available only for projectors with a resolution of WXGA (1280 × 800).
e im
age for Native varies depending on the input signal.
or projectors with a resolution of XGA (1024 × 768)
F
Aspect mode Aspect ratio for input signals
16:10 16:9 4:3
Normal
uto
A
Page 55
Image Aspect Ratio
Aspect mode Aspect ratio for input signals
16:10 16:9 4:3
4:3
16:9
Relat
g
•
ed Links
"List of Functions" p.9
55
Page 56
Adjusting Image Quality (Color Mode)
rojector oers dierent color modes to provide optimum brightness,
e p
contrast, and color for a variety of viewing environments and image types.
You can select the mode designed to match your image and environment, or
experiment with the available modes.
Related Links
g
•
"Changing the Color Mode" p.56
•
"Available Color Modes" p.56
•
"Setting Auto Iris" p.56
Changing the Color Mode
You can also set the C
ed Links
Relat
g
•
"Image Quality Settings - Image Menu" p.106
olor Mode setting in the projector's Image menu.
Available Color Modes
You can set the projector to use these color modes, depending on the input
ource you are using:
s
56
You can change the projector's Color Mode using the remote control to optimize
the image for your viewing environment.
Turn on the projector and switch to the image source you want to use.
a
Press the [Color Mode] button on the remote control to change the Color
b
M
ode.
ame of the Color Mode appears briey on the screen and then image
e n
appearance changes.
To cycle through all of the available color modes for your input signal,
c
p
ress the [Color Mode] button repeatedly.
Color mode Description
Dynamic is i
Presentation Best for projecting vivid images.
Cinema Best for enjoying content such as movies.
sRGB Best for faithfully reproducing the color of the source
Blackboard Best for projecting images directly on a green
s the brightest mode. Best for prioritizing
brightness.
im
age.
c
halkboard.
Setting Auto Iris
You can turn on A
brightness of the content.
Turn on the projector and switch to the image source you want to use.
a
uto Iris to automatically optimize the image based on the
Page 57
Adjusting Image Quality (Color Mode)
Press the [Menu] button on the control panel or remote control.
b
57
Select the I
c
Select A
d
Choose one of the following options and press [Enter]:
e
mage menu and press [Enter].
uto Iris and press [Enter].
•
ormal for standard brightness adjustment.
N
•
High Speed to adjust brightness as soon as the scene changes.
Press [Menu] or [Esc] to exit the menus.
f
Page 58
Controlling the Volume with the Volume Buttons
olume buttons control the projector's internal speaker system.
e v
You can also control the volume of any external speakers you connected to the
projector.
You must adjust the volume separately for each connected input source.
Turn on the projector and start a presentation.
a
To lower or raise the volume, press the [Volume] buttons on the control
b
p
anel or remote control as shown.
58
A volume gauge appears on the screen.
To set the volume to a s
c
the projector's Settings menu.
pecic level for an input source, select Volume in
Caution
o not start a presentation at a high volume setting. Sudden loud noises may cause
D
hearing loss.
Always lower the volume before powering o, so that you can power on and then
gradually increase the volume.
Relat
g
•
ed Links
"Projector Feature Settings - Settings Menu" p.109
Page 59
Adjusting Projector Features
ollow the instructions in these sections to use your projector's adjustment features.
F
Related Links
g
•
"Projecting Two Images Simultaneously" p.60
•
"Projecting a PC Free Presentation" p.63
•
"Shutting O the Image and Sound Temporarily" p.68
•
"Stopping Video Action Temporarily" p.69
•
"Zooming In/Zooming Out of Images (E-Zoom)" p.70
•
"Saving a User's Logo Image" p.72
•
"Saving a User Pattern" p.74
•
"Color Dierence Correction when Projecting from Multiple Projectors" p.75
•
"Projector Security Features" p.78
Page 60
Projecting Two Images Simultaneously
60
You can use the split screen feature to simultaneously project two images from
ent image sources. You can control the split screen feature using the
dier
remote control or the projector menus.
Press the [Split] button on the remote control.
a
e c
urrently selected input source moves to the le of the screen.
You can perform the same operations from S
projector's Settings menu.
Press the [Menu] button.
b
Y
ou see this screen:
plit Screen in the
While using the split screen feature, other projector features may not be
lable and some settings may be automatically applied to both images.
avai
Page 61
Projecting Two Images Simultaneously
61
To select an input source for the other image, select the S
c
press [Enter], select the input source, select Execute, and press [Enter].
•
Y
ou can only select input sources that can be combined.
•
While using the split screen feature, the Source screen appears
when you change the input source from the remote control.
To switch images, select S
d
e projected images on the le and right are swapped.
wap Screens and press [Enter].
ource setting,
To enlarge one image while reducing the other image, select S
e
press [Enter], select a size, and press [Enter]. To exit the menu, press
[Menu].
Depending on the video input signals, the images may not appear at
he same size even if you select Equal.
t
To select the audio, select A
f
option, and press [Enter]. To exit the menu, press [Menu].
Select A
To align the projected images, select Alig
g
setting, and press [Enter] again. To exit the menu, press [Menu].
uto to hear audio from the largest screen or the le screen.
udio Source, press [Enter], select an audio
n, press [Enter], select the
creen Size,
To exit the split screen feature, press [Split] or [Esc].
h
Relat
g
•
•
•
ed Links
"Unsupported Input Source Combinations for Split Screen Projection" p.62
"Split Screen Projection Restrictions" p.62
"List of Functions" p.9
Page 62
Projecting Two Images Simultaneously
62
Unsupported Input Source Combinations for Split
S
creen Projection
ese in
•
•
•
•
•
g
•
put source combinations cannot be projected on a split screen.
Computer1 and Computer2
Computer1/Computer2 and Video
HDMI1 and HDMI2
USB Display and USB/LAN
USB and LAN
Related Links
"List of Functions" p.9
Split Screen Projection Restrictions
Operating restrictions
e f
ollowing operations cannot be performed during split screen projection.
•
Setting the projector's menu
•
E-Zoom
•
Switching the aspect mode
•
Operations using the [User] button on the remote control
•
Auto Iris
right. Adjustments that ae
and Color Temp. are applied for both le and right images.
•
Even if you make adjustments for Noise Reduction and Deinterlacing in the
projector's Image menu, Noise Reduction is set to 0 and Deinterlacing is set
to O for the image on the right.
•
Even if you set Display Background to Logo in the projector's Extended
menu, the blue screen appears when no image signal is being input.
Related Links
g
•
"Image Aspect Ratio" p.53
•
"Adjusting Image Quality (Color Mode)" p.56
•
"Projector Feature Settings - Settings Menu" p.109
•
"Projector Setup Settings - Extended Menu" p.111
•
"Image Quality Settings - Image Menu" p.106
•
"Zooming In/Zooming Out of Images (E-Zoom)" p.70
•
"Setting Auto Iris" p.56
ct the entire projected image such as Color Mode
Image restrictions
•
If you make adjustments such as Brightness, Contrast, Color Saturation,
Tint, and Sharpness in the projector's Image menu, you can apply them only
to the image on the le. Default adjustments are applied to the image on the
Page 63
Projecting a PC Free Presentation
63
You can use your projector's PC Free feature whenever you connect a USB
vice that contains compatible presentation les. is lets you quickly and
de
easily display a presentation and control it using the projector's remote control.
ed Links
Relat
g
•
"Supported PC Free File Types" p.63
•
"Precautions on PC Free Projection" p.63
•
"Starting a PC Free Slide Show" p.64
•
"Starting a PC Free Movie Presentation" p.65
•
"PC Free Display Options" p.66
•
"List of Functions" p.9
Supported PC Free File Types
You can project these types of les u
•
F
or best results, place your les on media that is formatted in
FAT16/32.
•
If you have trouble projecting from media formatted for non-Windows
le systems, try formatting the media for Windows instead.
sing the projector's PC Free feature.
File contents File type
ension)
(ext
Image .jpg Make sure the le i
.bmp Make sure the le i
.gif Make sure the le i
.png Make sure the le i
Movie .avi
(M
otion
JPEG)
Details
s not:
•
CMYK format
•
Progressive format
•
Highly compressed
•
Above 8192 × 8192 resolution
s not:
•
Above 1280 × 800 resolution
s not:
•
Above 1280 × 800 resolution
•
Animated
•
Interlaced
s not:
•
Above 1280 × 800 resolution *
•
Interlaced
Supports only AVI 1.0.
Make sure the le is not:
•
Saved with an audio codec other than PCM or
ADPCM
•
Above 1280 × 720 resolution
•
Larger than 2 GB
* When you use a projector with a resolution of Full HD, you can project a le
ith a maximum resolution of 1920 × 1200.
w
Precautions on PC Free Projection
Note the following precautions when using PC Free features.
Page 64
Projecting a PC Free Presentation
•
ou cannot use a USB key for PC Free features.
Y
•
Do not disconnect the USB storage device while it is being accessed;
otherwise, PC Free may not operate correctly.
•
You may not be able to use the security features on certain USB storage
devices with PC Free features.
•
When connecting a USB device that includes an AC adapter, connect the AC
adapter to an electrical outlet when you use the device with your projector.
•
Some commercially available USB card readers may not be compatible with
the projector.
•
e projector can recognize up to 5 cards inserted into the connected card
reader at one time.
•
You cannot correct keystone distortion while projecting in PC Free, so correct
the image shape before you begin your presentation.
•
You can use the following functions while projecting in PC Free.
•
Freeze
•
A/V Mute
•
E-Zoom
Press the [USB] button on the remote control.
a
e PC F
ree le list screen is displayed.
•
f the Select Drive screen is displayed, press the arrow buttons to
I
select the drive and press [Enter].
•
To display images on the other USB drive, highlight Select Drive
at the top of the le list screen and press [Enter].
64
Related Links
g
•
"Stopping Video Action Temporarily" p.69
•
"Shutting O the Image and Sound Temporarily" p.68
•
"Zooming In/Zooming Out of Images (E-Zoom)" p.70
Starting a PC Free Slide Show
Aer connecting a USB device to the projector, you can switch to the USB input
source and start your slide show.
You can change the PC Free operation options or add special ee
highlighting Option at the bottom of the screen and pressing [Enter].
cts by
Do one of the following to locate your les:
b
•
I
f you need to display les inside a subfolder on your device, press the
arrow buttons to highlight the folder and press [Enter].
•
To move back up a folder level on your device, highlight Back to Top
and press [Enter].
Do one of the following:
c
•
T
o display an individual image, press the arrow buttons to highlight the
image and press [Enter]. (Press the [Esc] button to return to the le list
screen.)
Page 65
Projecting a PC Free Presentation
•
o display a slide show of all the images in a folder, press the arrow
T
buttons to highlight the Slideshow option at the bottom of the screen
and press [Enter].
•
Y
ou can change the image switching time by highlighting Option
at the bottom of the screen and pressing [Enter].
•
If any le names are longer than the display area or include
unsupported symbols, the le names may be shortened or
changed only on the screen display.
Turn o
f
Related Links
g
•
"PC Free Display Options" p.66
•
"Connecting to a USB Device" p.30
the USB device, if necessary, and then disconnect the device from
the projector.
Starting a PC Free Movie Presentation
65
While projecting, use the following commands to control the display:
d
•
T
o rotate a displayed image, press the up or down arrow button.
•
To move to the next or previous image, press the le or right arrow
button.
Aer co
source and start your movie.
a
nnecting a USB device to the projector, you can switch to the USB input
You can change the PC Free operation options by highlighting O
the bottom of the screen and pressing [Enter].
Press the [USB] button on the remote control.
e PC F
ree le list screen is displayed.
ption at
To stop the display, follow the on-screen instructions or press the [Esc]
e
b
utton.
You return to the le list screen.
Page 66
Projecting a PC Free Presentation
•
I
f the Select Drive screen is displayed, press the arrow buttons to
select the drive and press [Enter].
•
To display movie les on the other USB drive, highlight Select
Drive at the top of the le list screen and press [Enter].
Do one of the following to locate your les:
b
•
I
f you need to display les inside a subfolder on your device, press the
arrow buttons to highlight the folder and press [Enter].
•
To move back up a folder level on your device, highlight Back to Top
and press [Enter].
PC Free Display Options
You can select these display options when using PC Free. To access this screen,
hig
hlight Option at the bottom of the PC Free le list screen and press [Enter].
66
To play back a movie, press the arrow buttons to highlight the le an
c
press [Enter].
•
f any le names are longer than the display area or include
I
unsupported symbols, the le names may be shortened or
changed only on the screen display.
•
If you want to play back all the movies in a folder in sequence,
select the Slideshow option at the bottom of the screen.
To stop movie playback, press the [Esc] button, highlight E
d
[Enter].
You return to the le list screen.
Turn o
e
the projector.
Related Links
g
•
"PC Free Display Options" p.66
•
"Connecting to a USB Device" p.30
the USB device, if necessary, and then disconnect the device from
d
xit, and press
Setting Options Description
Display Order Name Order Displays les in n
Date Order Displays les in d
Sort Order In Ascending Sorts les in r
In Descending Sorts les in l
Continuous Play On Displays a slide show continuously
O Displays a slide show once
Screen Switching
T
ime
Eect No No ee
No Does not display the next le
automatically
1 Second to 60 Seconds Displays les f
switches to the next le automatically;
high resolution images may switch at
a slightly slower rate
ct
ame order
ate order
st-to-last order
ast-to-rst order
or the selected time and
Page 67
Projecting a PC Free Presentation
Setting Options Description
Wipe Transitions between images using a
ipe eect
w
Dissolve Transitions between images using a
di
ssolve eect
Random Transitions between images using a
ran
dom variety of eects
67
Page 68
Shutting O
the Image and Sound Temporarily
68
You can temporarily turn o
redirect your audience's attention during a presentation. Any sound or video
action continues to run, however, so you cannot resume projection at the point
that you shut it o.
If you want to display an image such as a company logo or picture when
t
he [A/V Mute] button is pressed, you can select the screen displayed in
the A/V Mute setting in the projector's Extended menu.
s Extended > Display > A/V Mute
Press the [A/V Mute] button on the remote control to temporarily stop
a
p
rojection and mute any sound.
the projected image and sound if you want to
•
Y
ou can also stop projection using the A/V Mute slide lever on the
projector.
•
e projector's power automatically turns o 30 minutes aer A/V
Mute is enabled. You can disable this feature.
s ECO > A/V Mute Timer
•
e lamp is still operating during A/V Mute, so the lamp hours
continue to accumulate.
Relat
g
•
•
ed Links
"Projector Setup Settings - Extended Menu" p.111
"Projector Setup Settings - ECO Menu" p.121
To turn the image and sound back on, press [A/V Mute] again.
b
Page 69
Stopping Video Action Temporarily
You can temporarily stop the action in a video or computer presentation and
eep the current image on the screen. Any sound or video action continues to
k
run, however, so you cannot resume projection at the point that you stopped it.
Press the [Freeze] button on the remote control to stop the video action.
a
To restart the video action in progress, press [Freeze] again.
b
69
Page 70
Zooming In/Zooming Out of Images (E-Zoom)
You can zoom in or zoom out of the projected image using the [E-Zoom] button
n the remote control.
o
e size and the position of the zoomed image remain even aer switching the
input source or turning o the projector.
Relat
g
•
•
ed Links
"Zooming Into Images" p.70
"Zooming Out of Images" p.70
•
T
o zoom out of the image, press the [E-Zoom] – button.
•
To return to the original image size, press the [Default] button.
When projecting images from an Epson document camera, you can
en
large the image from one to eight times its size in 57 incremental steps
using the [E-Zoom] + button on the document camera.
When the zoom ratio display disappears, the size and the position of the
zo
omed image will be saved. Press the [E-Zoom] +/- buttons to make
adjustment again.
Zooming Out of Images
70
Zooming Into Images
Press the [E-Zoom] + button on the remote control.
a
rojected image is enlarged focusing around the center of the image.
e p
You can enlarge the image between one to four times in 25 incremental
steps.
Use the following buttons on the remote control to adjust the zoomed
b
im
age while the zoom ratio is displayed:
•
Press the [E-Zoom] + button repeatedly to zoom into the image.
•
To pan around the zoomed image, use the arrow buttons.
Press the [E-Zoom] - button on the remote control.
a
rojected image is reduced. You can reduce the image between 100%
e p
to 50% in incremental steps.
Use the following buttons on the remote control to adjust the zoomed-out
b
im
age while the zoom ratio is displayed:
•
Press the [E-Zoom] - button repeatedly to zoom out of the projected
image.
•
To move the zoomed-out image in the projection area, use the arrow
buttons.
•
To zoom into the image, press the [E-Zoom] + button.
Page 71
Zooming In/Zooming Out of Images (E-Zoom)
•
o return to the original image size, press the [Default] button.
T
When projecting image from an Epson document camera, you can also
r
educe the image using the [E-Zoom] - button on the document camera.
When the zoom ratio display disappears, the size and the position of the
omed image will be saved. Press the [E-Zoom] +/- buttons to make
zo
adjustment again.
71
Page 72
Saving a User's Logo Image
72
You can save an image on the projector and display it whenever the projector
urns on. You can also display the image when the projector is not receiving an
t
input signal. is image is called the user's logo screen.
You can select a photo, graphic, or company logo as the user's logo, which is
useful in identifying the projector's owner to help deter the. You can prevent
changes to the user's logo by setting up password protection.
•
I
f the User's Logo Protection setting in the Password Protection
setting menu is set to On, set to O before saving the user's logo.
•
When you copy the menu settings from one projector to another using
the batch setup feature, user's logo is also copied. Do not register the
information that you do not want to share between multiple projectors
as a user's logo.
•
You cannot save content that is protected by HDCP.
Display the image you want to project as the user's logo.
a
Press the [Menu] button, select the E
b
xtended menu, and press [Enter].
Select U
c
You see a prompt asking if you want to use the displayed image as a user's
logo.
Select Y
d
Check the displayed image, and then select Y
e
e user's logo is overwritten and a completion message is displayed.
Press [Esc] to exit the message screen.
f
Select the E
g
Select Dis
h
Select when you want to display the User's Logo screen:
i
•
•
•
ser's Logo > Start Setting and press [Enter].
Adjustments such as Keystone, E-Zoom, or Aspect are temporarily
anceled when you select User's Logo.
c
es and press [Enter].
es to save it as the user's logo.
xtended menu and press [Enter].
play and press [Enter].
T
o display it whenever there is no input signal, select Display
Background and set it to Logo.
s Extended > Display > Display Background
To display it whenever you turn the projector on, select Startup Screen
and set it to On.
s Extended > Display > Startup Screen
To display it whenever you press the [A/V Mute] button, select A/V
Mute and set it to Logo.
s Extended > Display > A/V Mute
Page 73
Saving a User's Logo Image
73
To prevent anyone from changing the User's Logo settings without r
a password, set the User's Logo Protection setting to On in the Password
Protection setting menu and set the password.
Related Links
g
•
"Shutting O the Image and Sound Temporarily" p.68
•
"Selecting Password Security Types" p.79
st entering
Page 74
Saving a User Pattern
74
ere ar
lines and grid patterns. You can project these patterns to aid in presentations
using the Pattern Display settings.
You can also save the image that is currently being projected as a User Pattern.
a
b
e four types of patterns pre-registered in the projector, such as ruled
Once you save a User Pattern, the pattern cannot be returned to the
fac
tory default.
Project the image you want to save as the User Pattern, and then press the
[Menu] button on the control panel or remote control.
Select the S
ettings menu and press [Enter].
•
A
djustments such as Keystone, E-Zoom, or Aspect are
temporarily cancelled when you select User Pattern.
•
You cannot save digital images protected by HDCP technology as
a User Pattern.
Select Y
d
Press [Enter].
e
Y
Select Y
f
You see a completion message.
es and press [Enter].
ou see a prompt asking if you want to save the image as the User Pattern.
es and press [Enter].
Select P
c
You see a prompt asking if you want to use the displayed image as a User
Pattern.
attern > User Pattern and press [Enter].
Page 75
Color D
ierence Correction when Projecting from Multiple Projectors
75
When lining up multiple projectors to project images, you can correct the
rightness and color tone of each projector's image so that the images match
b
closely.
You can set a unique projector ID for each projector to operate them
individually using a remote control, and then correct the brightness and color
for each projector.
•
I
n some cases the brightness and color tone may not match completely
even aer correction.
•
If brightness and color tone dierences become more noticeable over
time, repeat the adjustments.
Relat
g
•
•
•
ed Links
"Setting the Projector ID" p.75
"Selecting the Projector You want to Operate" p.75
"Matching Multiple-Projector Display Quality" p.76
Setting the Projector ID
To control multiple projectors from a remote control, give each projector a
uniq
ue ID.
Use the arrow buttons to select the identication number you want to use
c
for the projector. en press [Enter].
Press [Menu] or [Esc] to exit the menus.
d
Repeat these steps for all the other projectors you want to operate from
e
o
ne remote control.
Selecting the Projector You want to Operate
Press the [Menu] button, select the E
a
b
Select P
rojector ID and press [Enter].
xtended menu, and press [Enter].
Aer s
etting the projector's ID, select the ID for the projector you want to
operate using the remote control.
Aim the remote control at the target projector and press the [ID] button.
a
Page 76
Color D
e c
disappears aer about 3 seconds.
While holding the [ID] button, press the number button that matches the
b
ID o
ierence Correction when Projecting from Multiple Projectors
urrent Projector ID is displayed on the projected screen. It
f the projector you want to operate.
Matching Multiple-Projector Display Quality
You can match the display quality of multiple projectors that will project next to
ach other.
e
•
W
hen you select [0/All] on the remote control, you can operate
all projectors regardless the Projector ID setting.
•
When you set the Projector ID setting to O, you can operate
the projector using the remote control whichever ID you select
on the remote control.
•
e projector ID setting is saved in the remote control. Even if
the remote control batteries are removed to replace them and
so on, the saved ID setting is retained. However, if the batteries
are le out of the remote control for an extended period, the ID
returns to its default setting ( 0/All).
•
When you use multiple remote controls at the same time, you
may not be able to operate projectors as intended due to infrared
interference.
76
rojector you want to operate is selected.
e p
Turn on all the projectors on which you want to match the display quality.
a
Set ID numbers on each projector.
b
Make sure all the projectors are using the same Color Mode setting.
c
Select the remote control ID to match the r
d
st projector.
Page 77
Color D
ierence Correction when Projecting from Multiple Projectors
77
Press the [Menu] button, select the I
e
Select settings as necessary.
f
Select the remote control ID to match the next projector, then repeat
g
I
mage menu adjustments as necessary to match the projectors' displays.
mage menu, and press [Enter].
Page 78
Projector Security Features
You can secure your projector to deter t
setting up the following security features:
•
Password security to prevent people who do not know the password from
using the projector, and prevent changes to the startup screen and other
settings.
is acts as an anti-the function as the projector cannot be used even if it is
stolen, and you can limit who can use the projector.
•
Button lock security to block operation of the projector using the buttons on
the control panel.
is is useful at events or shows when you want to deactivate all buttons
during projection or at schools when you want to limit button operation.
•
Security cabling to physically secure the projector in place.
Related Links
g
•
"Password Security Types" p.78
•
"Locking the Projector's Buttons" p.80
•
"Installing a Security Cable" p.81
he or prevent unintended use by
ed Links
Relat
g
•
"Setting a Password" p.78
•
"Selecting Password Security Types" p.79
•
"Entering a Password to Use the Projector" p.80
•
"List of Functions" p.9
Setting a Password
or the rst time you use the projector, you must set a password.
F
No password is set by default. You must set a password.
Hold down the [Freeze] button on the remote control for about 5 seconds.
a
78
Password Security Types
You can set up the following types of password security using one shared
password:
•
Power On Protection password prevents anyone from using the projector
without rst entering a password. When plugging the power cord and turning
on the projector at rst time, you must enter the correct password. is also
applies to Direct Power On and Auto Power On.
•
User's Logo Protection password prevents anyone from changing the custom
screen displayed when the projector turns on, when no signal is being input,
or when you use the A/V Mute feature. e custom screen discourages the
by identifying the projector's owner.
•
Network Protection password prevents anyone from changing the projector's
Network settings.
You see the Password Protection setting menu.
•
I
f no password has been set, a screen prompting you to set
a password is displayed before you can view the Password
Protection setting menu.
•
If Password Protection is already activated, you must enter the
correct password to display the Password Protection setting
menu.
Page 79
Projector Security Features
79
Select P
b
You see the prompt C
Select Y
c
Hold down the [Num] button on the remote control and use the numeric
d
b
assword and press [Enter].
hange the password?.
es and press [Enter].
If you select N
again.
uttons to set a four-digit password.
o, the Password Protection setting menu is displayed
Enter the password again.
e
Y
ou see the message Password accepted. If you enter the password
incorrectly, a message is displayed prompting you to re-enter the
password.
Press [Esc] to return to the menu.
f
Make a note of the password and keep it in a safe place.
g
Selecting Password Security Types
er setting a password, you see this menu, allowing you to select the password
A
security types you want to use.
e p
assword displays as **** as it is entered. A conrmation prompt is
displayed when you enter the fourth digit.
If you do not see this menu, hold down the [Freeze] button on the remote
co
ntrol for 5 seconds until the menu appears.
•
To prevent unauthorized use of the projector, select On as the Power On
Protection setting.
•
To prevent changes to the User's Logo screen or related display settings, select
On as the User's Logo Protection setting.
•
To prevent changes to network settings, select On as the Network Protection
setting.
Page 80
Projector Security Features
80
You can attach the password protect sticker to the projector as an additional
he deterrent.
t
Be sure to keep the remote control in a safe place; if you lose it, you will
n
ot be able to enter the password.
Entering a Password to Use the Projector
hen the password screen is displayed, enter the correct password.
W
If the password is incorrect, you see a message and a prompt to try again.
b
En
ter the correct password to proceed.
Attention
•
f an incorrect password is entered three times in succession, the message
I
e projector's operation will be locked. is displayed for approximately
5 minutes, and the projector switches to standby mode. If this happens,
disconnect the power plug from the electrical outlet, reinsert it, and turn
the projector back on. e projector displays the password entry screen
again so that you can enter the correct password.
•
If you have forgotten the password, make a note of the " Request Code:
xxxxx" number that appears on the screen and contact Epson for help.
•
If you continue to repeat the above operation and input the wrong
password 30 times in succession, the message e projector's operation
will be locked. Contact Epson as described in your documentation. is
displayed and the projector does not accept any more password entries.
Contact Epson for help.
Locking the Projector's Buttons
Hold down the [Num] button on the remote control while you enter the
a
p
assword using the numeric buttons.
assword screen closes.
e p
You can lock the buttons on the control panel to prevent anyone from using the
projector. e projector can still be operated using the remote control.
Page 81
Projector Security Features
81
Press the [Menu] button on the control panel or remote control.
a
Select the S
b
Select L
c
Select one of these lock types and press [Enter]:
d
•
T
o lock all of the projector's buttons, select Full Lock.
•
To lock all buttons except the power button, select Partial Lock.
You see a conrmation prompt.
Select Y
e
e Control Panel Lock setting takes eect.
ettings menu and press [Enter].
ock Setting > Control Panel Lock, and press [Enter].
es and press [Enter].
Unlocking the Projector's Buttons
f the projector's buttons have been locked, do one of the following to unlock
I
them.
•
Hold down the [Enter] button on the control panel for 7 seconds. A message
is displayed and the lock is released.
•
Select O as the Control Panel Lock setting in the projector's Settings menu.
s Settings > Lock Setting > Control Panel Lock
Related Links
g
•
"Projector Feature Settings - Settings Menu" p.109
Installing a Security Cable
You can install the security cable on the projector to deter the.
•
Use the security slot on the projector to attach a Kensington Microsaver
Security system.
For more details on the Microsaver Security System, visit the
ensington Web site.
K
https://www.kensington.com/
•
U
se the security cable attachment point on the projector to attach a wire cable
and secure it to a room xture or heavy furniture.
Related Links
g
•
"Unlocking the Projector's Buttons" p.81
Page 82
Projector Security Features
82
You can use a commercially available t
the documentation supplied with the wire lock for locking instructions.
he-prevention wire lock. See
Page 83
Using the Projector on a Network
ollow the instructions in these sections to set up your projector for use on a network.
F
Related Links
g
•
"Wireless Network Projection" p.84
Page 84
Wireless Network Projection
You can send images to your projector through a wireless network.
•
o do this, you must install the Epson 802.11b/g/n wireless LAN module, and
T
then set up your projector and computer for wireless projection.
•
Some models have built-in wireless LAN modules. You don't need to install
the Epson 802.11b/g/n wireless LAN module.
You can connect the projector to your wireless network by conguring the
connection manually using the projector's Network menus.
Aer installing the wireless LAN module and setting up the projector, download
and install the necessary network soware. Use the following soware and
documentation to set up and control wireless projection.
•
Epson iProjection (Windows/Mac) soware allows you to hold interactive
meetings by projecting the computer screens of users over a network. See the
Epson iProjection Operation Guide (Windows/Mac) for instructions.
•
Epson iProjection (iOS/Android) app allows you to project from iOS or
Android devices.
You can download Epson iProjection from the App Store or Google Play. Any
fees incurred when communicating with the App Store or Google Play are the
responsibility of the customer.
•
Epson iProjection (Chromebook) app allows you to project from
Chromebook devices.
You can download Epson iProjection from the Chrome Web Store. Any
fees incurred when communicating with the Chrome Web Store are the
responsibility of the customer.
•
electing Wireless Network Settings in Mac" p.88
"S
•
"Setting Up Wireless Network Security" p.88
•
"Using a QR Code to Connect a Mobile Device" p.89
•
"Using a USB Key to Connect a Windows Computer" p.89
•
"List of Functions" p.9
Installing the Wireless LAN Module
To use the projector over a wireless network, install the Epson 802.11b/g/n
w
ireless LAN module. Do not install any other type of wireless LAN module.
Attention
ever remove the module while its indicator is blue or ashing, or while you are
N
projecting wirelessly. is could damage the module or lose data.
Use a cross-head screwdriver to remove the screw that secures the wireless
a
AN module cover.
L
84
If the W
set a password is displayed when you save the network settings. Follow the
on-screen instructions to set the password.
Relat
g
•
•
•
ed Links
"Installing the Wireless LAN Module" p.84
"Selecting Wireless Network Settings Manually" p.85
"Selecting Wireless Network Settings in Windows" p.87
eb Control Password has not been set, a screen prompting you to
Page 85
Wireless Network Projection
85
Connect the wireless LAN module to the USB-A port.
b
Attach the wireless LAN module cover, and secure it in place with the
c
screw.
Selecting Wireless Network Settings Manually
Before you can project from your wireless network, you need to select network
s
ettings for the projector.
You can use the wireless LAN even when the projector is o
follow the steps below to congure the wireless LAN, and then set A/V
Output to Always On in A/V Settings from the Extended menu or set
Standby mode to Communication On from the ECO menu.
s Extended > A/V Settings > A/V Output
s ECO > Standby Mode
Press the [Menu] button, select the N
a
etwork menu, and press [Enter].
. To do so,
ed Links
Relat
g
•
"List of Functions" p.9
Select On as t
b
Select N
c
he Wireless LAN Power setting.
etwork Conguration and press [Enter].
Page 86
Wireless Network Projection
Select the Bas
d
ic menu and press [Enter].
•
P
rojector Keyword lets you turn on a security password to prevent
access to the projector by anyone not in the room with it. You must
enter a displayed, randomized keyword from a computer using Epson
iProjection to access the projector and share the current screen.
•
Display Keyword lets you select whether to display a projector keyword
on the projected image when accessing the projector using Epson
iProjection.
•
Display LAN Info. lets you set the display format for the projector's
network information.
Use the displayed keyboard to enter numbers and characters. Press
t
he arrow buttons on the remote control to highlight characters and
press [Enter] to select them.
86
Select the basic options as necessary.
e
•
P
rojector Name lets you enter a name up to 16 alphanumeric
characters long to identify the projector over the network.
•
Remote Password lets you enter a password up to 32 alphanumeric
characters long for accessing the projector using the Basic Control. (e
user name is EPSONREMOTE. No password is set by default.)
•
Web Control Password lets you enter a password up to 32
alphanumeric characters long for accessing the projector over the Web.
(e user name is EPSONWEB. No password is set by default.)
•
Monitor Password lets you enter a password up to 16 alphanumeric
characters long when using Epson Projector Management Ver.5.30
or earlier, or when monitoring the projector in combination with a
switcher or controller. (No password is set by default.)
•
Moderator Password lets you enter a four-digit number password for
accessing the projector as a moderator using Epson iProjection. (No
password is set by default.)
f
g
Select the W
Select the C
•
Quick lets you connect to multiple smartphones, tablets, or computers
directly using wireless communication.
ireless LAN menu and press [Enter].
onnection Mode setting.
Page 87
Wireless Network Projection
•
dvanced lets you connect to smartphones, tablets, or computers over a
A
wireless network access point.
If you selected the A
h
Point to select the access point you want to connect to.
dvanced connection mode, select Search Access
Press the [LAN] button on the remote control.
l
e w
ireless network settings are complete when you see the correct IP
address on the LAN standby screen.
87
If you need to assign the SSID manually, select SS
SSID.
For the A
i
network as necessary.
•
•
•
To prevent the SSID or IP address from being displayed on the LAN
j
s
tandby screen and Home screen, set the SSID Display setting or the IP
Address Display setting to O.
When you ni
k
screen instructions to save your settings and exit the menus.
dvanced connection mode, assign the IP settings for your
If your network assigns addresses automatically, select IP Settings to set
the DHCP setting to On.
If you must set addresses manually, select IP Settings to set the DHCP
setting to O, and then enter the projector's IP Address, Subnet Mask,
and Gateway Address as necessary.
If you want to connect the projector to the network using IPv6, select
IPv6 Settings to set the IPv6 setting to On, and then set the Auto
Conguration and Use Temporary Address settings as necessary.
sh selecting settings, select Complete and follow the on-
ID to enter the
When you have nished making wireless settings for your projector, you need to
select the wireless network on your computer. en start the network soware
to send images to your projector through a wireless network.
Selecting Wireless Network Settings in Windows
Before connecting to the projector, select the correct wireless network on your
mputer.
co
To access your wireless utility s
a
Windows taskbar.
oware, click the network icon on the
If no Web Control Password has been set, a screen prompting
you to set a password is displayed before you can save the settings.
Follow the on-screen instructions to set the password.
When connecting in Advanced connection mode, select the network
b
n
ame (SSID) of the network the projector is connecting to.
c
Click C
onnect.
Page 88
Wireless Network Projection
88
Selecting Wireless Network Settings in Mac
Before connecting to the projector, select the correct wireless network in Mac.
Click the Wi-Fi icon on the menu bar at the top of the screen.
a
When connecting in Advanced connection mode, make sure Wi-Fi is
b
t
urned on and select the network name (SSID) of the network the
projector is connecting to.
Setting Up Wireless Network Security
You can set up security for your projector to use on a wireless network. Set
u
p one of the following security options to match the settings used on your
network:
•
WPA2-PSK security *
•
WPA3-PSK security **
•
WPA2/WPA3-PSK security **
* Available only for the Quick connection mode.
** Available only for the Advanced connection mode.
Select the Wireless LAN menu and press [Enter].
c
d
Select the S
ecurity setting and press [Enter].
Contact your network administrator for guidance on entering the correct
inf
ormation.
Press the [Menu] button, select the N
a
b
Select N
etwork Conguration and press [Enter].
etwork menu, and press [Enter].
Select the security settings to match your network settings.
e
Page 89
Wireless Network Projection
89
Select P
f
characters long. To enter more than 32 characters, use your Web browser.
When you have ni
g
on-screen instructions to save your settings and exit the menus.
Related Links
g
•
"Network Menu - Wireless LAN Menu" p.116
assphrase, press [Enter], and enter a passphrase from 8 to 63
shed making settings, select Complete and follow the
Using a QR Code to Connect a Mobile Device
electing the wireless network settings for your projector, you can display
Aer s
a QR code on the screen and use it to connect a mobile device using the Epson
iProjection (iOS/Android) app.
•
M
ake sure you have installed the latest version of Epson iProjection on
your device.
•
You can download Epson iProjection for free from the App Store or
Google Play. Any fees incurred when communicating with the App
Store or Google Play are the responsibility of the customer.
•
When using Epson iProjection in Quick connection mode, we
recommend making security settings.
•
I
f you do not see the QR code, set the Display LAN Info. setting
to Text & QR Code in the projector's Network menu.
s Network > Network Conguration > Basic > Display LAN
Info.
•
To hide the QR code, press [Esc].
•
When the QR code is hidden, press [Enter] to display the code.
Start Epson iProjection on your mobile device.
b
Read the projected QR code using Epson iProjection to connect it to the
c
p
rojector.
To correctly read the QR code, make sure you face the screen
quarely and closely enough so that the projected code ts into the
s
guide of the mobile device's QR code reader. If you are too far from
the screen, the code may not be read.
When a connection is established, select Contents menu from , and
then select the le you want to project.
Using a USB Key to Connect a Windows Computer
Press the [LAN] button on the remote control.
a
e Q
R code is displayed on the projected surface.
You can set up your USB as
projector to a wireless LAN supported Windows computer. Aer creating the
USB key, you can quickly project images from the network projector.
Set up the USB key using Epson iProjection (Windows) s
a
See the E
instructions.
h drive as a USB key to quickly connect the
oware.
pson iProjection Operation Guide (Windows/Mac) for
Page 90
Wireless Network Projection
90
Make sure the wireless LAN module is installed or built into your
b
p
rojector.
Turn on the projector.
c
Press the [LAN] button on the remote control.
d
e L
AN standby screen is displayed. Verify that an SSID and IP address
are displayed.
Do one of the following to connect the USB key.
e
•
C
onnect the USB key to the projector's USB-A port. (Models with a
built-in wireless LAN module.)
•
Remove the wireless LAN module from the projector and insert the
USB key into the same port used for the wireless LAN module. (Models
with the optional wireless LAN module installed.)
You see a projected message that the network information update is
complete.
Remove the USB key.
f
I
f your projector needs the wireless LAN module, reinsert the wireless
LAN module into the projector. (Models with the optional wireless LAN
module installed.)
Aer a f
When you have ni
i
Hardware option in the Windows taskbar, and then remove the USB key
from your computer.
ew minutes, your computer image is displayed by the projector.
shed projecting wirelessly, select the Safely Remove
You may need to restart your computer to reactivate your wireless
AN connection.
L
Connect the USB key to a USB port on your computer.
g
Follow the on-screen instructions to install the necessary application.
h
•
I
f the Windows Firewall message is displayed, click Yes to disable
the rewall.
•
You need administrator authority to install the soware.
•
If it is not installed automatically, double-click MPPLaunch.exe
in the USB key.
Page 91
Monitoring and Controlling the Projector
ollow the instructions in these sections to monitor and control the projector over a network.
F
Related Links
g
•
"Epson Projector Management Connected / Epson Projector Management" p.92
•
"Controlling a Networked Projector Using a Web Browser" p.93
•
"Setting Up Projector Network E-Mail Alerts" p.97
•
"Setting Up Monitoring Using SNMP" p.99
•
"Using ESC/VP21 Commands " p.100
•
"Web API" p.102
Page 92
Epson Projector Management Connected / Epson Projector Management
Epson Projector Management Connected and Epson Projector Management is
oware that lets you monitor and control the status of projectors connected to
s
your network.
Epson Projector Management Connected manages projector information on a
cloud server, enabling remote monitoring and control from any device.
Epson Projector Management is soware for Windows only that lets you
monitor and control projectors on the same network from a computer.
Choose the appropriate option based on your usage environment and needs. If
you use Epson Projector Management Connected, you need to install the Epson
Projector Connected Agent. For more details, visit the following website.
https://www.projection-service.epson.com/epm-connected/
e au
thentication method when registering projectors varies depending
on the version of the Epson Projector Management soware you are using.
•
Ver.5.30 or earlier: Monitor Password
•
Ver.5.40 or later: Web Control Password
For the best results, we recommend that you use the latest version of the
Epson Projector Management.
s Network > Network Conguration > Others
92
Page 93
Controlling a Networked Projector Using a Web Browser
Once you have connected your projector to your network, you can select
rojector settings and control projection using a compatible Web browser. is
p
lets you access the projector remotely.
•
M
ake sure the computer and projector are connected to the network.
When projecting images using a wireless LAN, connect in Advanced
connection mode.
•
You can use the following Web browsers.
•
Microso Edge (Windows)
•
Safari (Mac, iOS)
•
Chrome (Android)
•
While using the Web browser, do not connect using a proxy server. You
cannot select all of the projector menu settings or control all projector
functions using a Web browser.
•
If you set Standby Mode to Communication On, you can use a Web
browser to select settings and control projection even if the projector is
in standby mode (when the power is o).
s ECO > Standby Mode
A
Make sure the projector is turned on.
a
Make sure your computer or device is connected to the same network as
b
t
he projector.
B
C
D
Controls the projector remotely.
Displays a test pattern.
Sets detailed projector settings.
Operates the projector's menu settings with your n
93
ger or mouse.
Start your Web browser on the computer or device.
c
Go to the Epson Web Control screen by entering the projector's IP address
d
in
to the browser's address box. When entering an IPv6 address, wrap the
address with [ and ].
You see the Epson Web Control screen.
Page 94
Controlling a Networked Projector Using a Web Browser
94
Select the option corresponding to the projector function you want to
e
co
ntrol.
You may need to log in to access some of the options on the E
Web Control screen. Set the following passwords rst.
•
To access the Basic Control option, you need to log in using
EPSONREMOTE as the user name and your Remote Password.
(No password is set by default.)
Set Basic Control to On in the projector's Network menu, and
then set the password.
s Network > Network Conguration > Others > Basic
Control
•
To access other options and save settings, you need to log in
using EPSONWEB as the user name and your Web Control
Password. (No password is set by default.)
Set the password in the projector's Network menu.
s Network > Network Conguration > Basic > Web Control
Password
Relat
g
•
•
•
•
ed Links
"Web Control Options" p.94
"Projector Setup Settings - ECO Menu" p.121
"Network Menu - Basic Menu" p.115
"List of Functions" p.9
pson
Web Control Options
Basic Control
Returns to the Epson Web Control screen.
A
Turns the projector on or o
B
Selects the input source.
C
Turns the video and audio on or o temporarily.
D
Pauses or resumes images.
E
Displays the QR code.
F
Adjusts the speaker volume.
G
Searches for sources.
H
.
Page 95
Controlling a Networked Projector Using a Web Browser
95
OSD Control Pad
Returns to the Epson Web Control screen.
A
Displays the projector's setting menus.
B
Use your n
C
Switches the operation method to button operation.
D
Resets the selected setting to its default value.
E
Returns to the previous menu.
F
Displays help topics.
G
ger or mouse to navigate the menus.
Test Pattern
Returns to the Epson Web Control screen.
A
Displays available test patterns; select to project a test pattern.
B
C
Turns o
test pattern display.
Page 96
Controlling a Networked Projector Using a Web Browser
ed Links
Relat
Advanced
g
•
"List of Functions" p.9
96
Opens the menus.
A
Displays the menu name you selected.
B
Species t
C
Lock/unlock the projector settings.
D
Updates the projector settings.
E
he projector settings.
You cannot change the following settings using Epson Web Control.
•
U
ser Button
•
User's Logo
•
HDMI EQ Setting
•
Language
•
Reset Lamp Hours
Page 97
Setting Up Projector Network E-Mail Alerts
97
You can set up the projector to send you an e-mail alert over the network if
here is a problem with the projector.
t
If you set the Standby Mode setting to Communication On, you can receive
the e-mail alerts even if the projector is in standby mode (when the power is
o).
s ECO > Standby Mode
Press the [Menu] button, select the N
a
b
c
Select N
Select the N
etwork Conguration and press [Enter].
otications menu and press [Enter].
etwork menu, and press [Enter].
Select a number for the SMTP server P
f
(default is 25).
Enter the e-mail address to be indicated as the sender in F
g
Choose an address e
h
want to receive. Repeat for up to three addresses.
Your e-mail address can be up to 64 alphanumeric characters long.
o enter more than 32 characters, use your Web browser.
T
When you ni
i
screen instructions to save your settings and exit the menus.
If a critical problem causes a projector to shut down, you may not receive
an e-m
Relat
g
•
•
•
ed Links
"Network Projector E-mail Alert Messages" p.97
"Projector Setup Settings - ECO Menu" p.121
"List of Functions" p.9
sh selecting settings, select Complete and follow the on-
ail alert.
ld, enter the e-mail address, and select the alerts you
ort Number, from 1 to 65535
rom.
Set the M
d
Enter the IP address for the S
e
ail Notication setting to On.
Do not use "127.x.x.x" (where x is a number from 0 to 255) for the
S
MTP Server.
MTP Server option.
Network Projector E-mail Alert Messages
When a problem occurs with a projector on the network, and you selected
t
o receive e-mail alerts, you receive an e-mail containing the following
information:
•
e email address set in From as the mail sender
•
Epson Projector in the subject line
•
e name of the projector experiencing a problem
Page 98
Setting Up Projector Network E-Mail Alerts
98
•
e IP addr
•
Detailed information about the problem
ess of the aected projector
Page 99
Setting Up Monitoring Using SNMP
99
Network administrators can install SNMP (Simple Network Management
rotocol) soware on network computers so they can monitor projectors.
P
If your network uses this soware, you can set up the projector for SNMP
monitoring.
Press the [Menu] button, select the N
a
b
c
Select N
Select the N
etwork Conguration and press [Enter].
otications menu and press [Enter].
etwork menu, and press [Enter].
Enter up to two IP addresses to receive SNMP n
f
for each address eld.
Do not use these addresses: 224.0.0.0 through 255.255.255.255
here x is a number from 0 to 255). is projector supports SNMP
(w
agent version 1 (SNMPv1).
When you ni
g
screen instructions to save your settings and exit the menus.
Related Links
g
•
"List of Functions" p.9
sh selecting settings, select Complete and follow the on-
otications, using 0 to 255
Set the S
d
Enter the SNMP C
e
long.
NMP setting to On.
ommunity Name up to 32 alphanumeric characters
Page 100
Using ESC/VP21 Commands
100
You can control the projector from an external device using ESC/VP21.
ed Links
Relat
g
•
"ESC/VP21 Command List" p.100
•
"Cable Layouts" p.100
•
"List of Functions" p.9
ESC/VP21 Command List
When the power ON command is transmitted to the projector, the power turns
on and it enters warm-up mode. When the projector's power has turned on, a
colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and returns a
":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
e following commands are available.
Item Command
Power On/O On PWR ON
Item Command
O MUTE OFF
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Contact Epson for more details.
Cable Layouts
Serial connection
•
C
onnector shape: D-Sub 9-pin (male)
•
Projector input port name: RS-232C
•
Cable type: Crossover (null modem) cable
In the following illustration, the projector side is shown on the le, and the
computer side on the right:
O PWR OFF
Signal selection Computer1 SOURCE 10
Computer2 SOURCE 20
HDMI1 SOURCE 30
HDMI2 SOURCE A0
Video SOURCE 41
USB Display SOURCE 51
USB SOURCE 52
LAN SOURCE 53
A/V Mute On/O On MUTE ON
Signal name Function
GND Signal wire ground
Loading...