Epson C83202 User Manual

EPSON
English
4002619 CO1-00
EPSON
EpsonScript™ Cartridge
C83202*
Macintosh User’s Guide
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the US) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
The EpsonScript Level 2 Cartridge is a customized product based on PhoenixPage Level 2 developed by Phoenix Technologies Ltd.
Epson is a registered trademark of Seiko Epson Corporation. TrueType, AppleTalk, Macintosh, and LaserWriter are registered trademarks of Apple
Computer, Inc.
ITC Avant Garde, ITC Bookman, ITC Zapf Chancery, ITC Zapf Dingbats are registered trademarks of International Typeface Corporation.
Bookman and Century Schoolbook are registered trademarks of Kingsley-ATF Type
Corporation.
Times, Helvetica, Helvetica Narrow, and Palatino are registered trademarks and New
Century Schoolbook is a trademark of Linotype AG and/or its related companies. Phoenix, PhoenixPage, and Phoenix MultiGray are registered trademarks of Phoenix
Technologies Ltd. PostScript is a registered trademark of Adobe Systems, Inc. General notice: Other product names used herein are for identification purposes only and
may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
EpsonScript Driver, Copyright © 1992,1993 PhonixPage PS2 Driver, Copyright © 1992,1993 COMPUTER:applications,Inc., Copyright © 1988-1993 All Right Reserved
Copyright ©1993 by Seiko Epson Corporation Nagano, Japan

Contents

Introduction
Features.. Before using EpsonScript
Available interface Required memory Applications NOT supported
Chapter 1
Installing the printer driver
Before installing
Easy and customize installation Using Easy installation Customize installation
Chapter 2 Setting Up Your Macintosh
Using Chooser to Set Up Your Printer
Selecting EpsonScript
Making settings in Page Setup
Renaming the Printer
Running the EpsonScript Utility Print Dialog Tips on Using TrueType Fonts
................................
........................
.........................
.........................
..................
Installing the Programs
.......................
..........................
.................
......................
......................
.................
.......................
....................
..........................
.................
................................
.....................
1 2 2 2
3
1-1
1-1 1-2 1-2 1-5
2-1 2-1 2-2 2-10
2-10 2-12 2-17
Chapter 3
Operation outline . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Using the EpsonScript Driver Utility
iii
Utility Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
PostScript Printers/ AppleTalk Zones . . . . . . . . . . . . . . 3-3
Printer is silent (box) . . . . . . . . . . . . . . . . . . . . . . . 3-3
Update Lists (Button) . . . . . . . . . . . . . . . . . . . . . . . 3-4
Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Print Requested Info (box) . . . . . . . . . . . . . . . . . . . . 3-4
Font Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Printer Options. . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
About (button) . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Font Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
List Fonts (button) . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Download (button) . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Remove (button) . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Printer Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
Printer Info (button) . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Send File (button) . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Rename (button) . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
General (button) . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

Features

The EpsonScript™ driver gives your Epson printer the capability to print out documents formatted for PostScript™ Level 2 printers (equivalent to the Apple® Personal Laser Writer-2g) with your Macintosh® computer. This driver provides you with the following high performance features, for use with today’s desktop publishing:
Q Printing of documentations for PostScript printers. You can
easily print text, line art, graphics, and so on. With this cartridge installed, your Epson printer works as if it is an Apple Laser Writer 2g.
iJ
35 fonts in 11 font families: Fixed Pitch 810 Courier, Dutch 801 Roman, Swiss 721, Geometric ITC AvantGarde, Revival 711 ITC Bookman, Swiss 721 Narrow, Century 702 Century Schlbook, Zapf Calligraphic 801, ITC Zapf Chancery Medium Italic, ITC Zapf Dingbats, and Symbol.
Q Epson quality, reliability, and ease of operation.
This manual is a supplement to your printer manual. It gives you the additional information necessary to use the EpsonScript cartridge with your printer. Store these manuals together.
Introduction 1

Before using EpsonScript

Available interface

By connecting your Macintosh using Epson’s optional LocalTalk interface C82312*, you can use EpsonScript with your Macintosh computer. (If your printer has a built-in LocalTalk interface, you can use it instead.)
Note:
0
Do not use the serial interface for this purpose, because the
Macintosh does not have a printer driver for the serial interface.
0
This cartridge cannot be used in the EPL4000/4100/4200,
EPL-7000, or EPL-8000/8100 printers. Also, this cartridge does not
work with any other printers even if the printer has a cartridge slot. Please contact your dealer for details on whether you can use this cartridge with later Epson printers than those listed in this manual.
0
This cartridge does not work if the optional Epson PostScript CARD
(C82609*) is installed in your printer.

Required memory

Before using this cartridge, make sure your printer has more than
1.5MB of memory. Because this cartridge generates printing data
using banding memory techniques, you should be able to print
out most documents without adding more memory. If you connect your printer to more than one computer, you must
assign at least 1.5MB of printer memory to the channel using the cartridge. (See your user’s guide for more details.)
However, it is recommended you increase your printer’s memory if you print documents that require large amounts of data, such as detailed graphics or complex layout formats.
2 Introduction
Note:
0
You
cannot
assign
the
PostScript
even
if
your printer has more than 3.OMB
0
When memory is insufficient for your document, the printing process is canceled. If this occurs, install extra memory in your printer.
mode to more than one channel,

Applications NOT supported

Applications listed below are not supported:
LaserTalk™ SmartArt™
of memory.
Introduction 3
Chapter 1
Installing the Programs
This chapter explains how to install the printer software on your Macintosh computer.
Before installing this software, install the EpsonScript hardware in
your printer according to the instructions in your User’s Guide. You can install this software using the installer programs included
in the disk packed with the EpsonScript package. This installer copies the printer driver, utility, driver supplement files, and screen fonts to your Macintosh computer.

Installing the printer driver

Before installing

To install the software, your Macintosh computer must have the following:
~3
2MB of RAM
Q
System 7.0 or later
0
Hard disk
Caution:
use this installer for these old systems, your system will be
corrupted.
Do not use the installerfor System 6.x or earlier.
(minimum; varies depending on the minimum size required by your system)
If
you
Installing the Programs 1-1

Easy and customize installation

The installer has two installation types; Easy Installation and Customize Installation. The characteristics of each installation are described below.
Easy installation
The installer copies all files which did not exist in your computer’s hard disk drive. This choice is recommended for most of the all users.
Customize installation
At the beginning of this installation, you can select the file(s) to be installed to your computer so you can save the hard disk space. However, we recommend you to start Easy Installation described above, because the utility program and the screen fonts revise your printing environment drastically better.

Using Easy installation

Follow the steps below to install the necessary files for using EpsonScript
with
your computer:
1. Turn on your Macintosh computer.
Note:
If
your Macintosh runs any applications automatically when the
turned on, quit the application before running the installer.
2.
Insert
1-2
Disk1 (Installation)
Tools window opens automatically.
3.
Double click the
window. The following window appears on your display:
Installing the Programs
“Installer”
into your computer. The
icon
in
the
“Printing Tools”
power
Printing
is
EPSON
Printing tools & Screen Fonts Installer
EpsonScript Printer Driver PPD files for the EPSON printers. EpsonScript Printer Utility Screen Fonts
4.
Click OK. The installer then shows the menu below:
easy Install
Click Install to place the
l EpsonScript Driver l EpsonScript Utility l Screen Fonts for System 7.1
on the hard disk named
0
HD-SCSI 0
Note
This sample is based on your running the installer using System 7.1, and
your current hard disk being HD-SCSI 0. The hard disk name, the
System name, and the items below
“Click Install to place the”
vary
according to your system environment.
Installing the Programs
1-3
5.
Make sure the name of the hard disk on you would like to install the programs is shown below the message
named”
(where
HD-SCSI 0
appears in the example).
“on the hard disk
If the hard disk name is correct, go to step 7.
6.
Click
Switch Disk.
Then one of other hard disk names is displayed. Click again until you see the desired hard disk name.
7.
Click
Install
to perform the easy installation. The installer starts
copying the necessary files automatically.
8.
Change the disk from
(Disk2)
when the installer instructs you to do so. Installer
Printing Tools (Disk1
) to
Screen Fonts
continues copying files automatically after you insert the next disk.
Note:
You need to exchange the disks several times, as the messages indicate.
9.
Make sure the following message shows on your display.
1-4
Installation on the active startup disk “HD-SCSI 0” was successful. You must now restart your Macintosh to use your new software.
10.
Click
Restart.
You are now finished copying files from the
disk 3.
Installing the Programs
Note :
If the screen fonts have already been installed, the following message appears in step 9. Click Quit to leave the installer if this occurs.
Installation on “HD-SCSI 0” was successful. If you are finished, click Quit to leave the Installer. If you wish to do additional installations, click Continue.
To enable the printer drivers, follow the instructions in the next chapter, “Setting Up Your Macintosh.”

Customize installation

Note:
You can copy only the files you need from the disks using this installation method. If you cannot print correctly after this installation, perform the your system settings.
Easy Installation
to copy the necessary files and modify
Steps 1 to 6 are the same as the steps in the
Easy Installation.
Follow the steps in that section first. From step 7, follow the procedures below:
7.
Click
Customize
The
Customize Installation
to open the
window is displayed.
Customize Installation
window.
Installing the Programs
1-5
Click the items you went to select; Shift-click to select multiple items.
Note:
You
can return to the
8.
Click the item(s) you would like to install. Selected items are
Easy Installation
by clicking
Easy Install.
displayed in reverse, and the product information is shown. For example, if you click
EpsonScript Driver,
the window
changes as follows:
1-6
Click the items you want to select; Shift-click to select multiple items.
Installing the Programs
Note:
You can select multiple items by dragging the mouse or clicking the next item while pressing the
shift
key. Product information is shown when
you select a single item only.
9.
After you select the items, click
Install.
The installer starts
copying the necessary files automatically.
10. If you install the screen fonts, eventually a message appears requesting you to change the disk. Change the disk from
Printing Tools (Disk1)
to
Screen Fonts (Disk2)
as instructed by the installer messages. Installer continues copying files automatically after you insert the required disk.
Note:
You will need to exchange the disks several times, as the messages indicate.
The following steps are the same as the previous “Easy Installation” section. Follow from step 9 on in that section to complete installation.
Installing the Programs
1-7
Chapter 2
Setting Up Your Macintosh
To use EpsonScript, you need to select your printer using
Chooser.
can start printing using your EpsonScript printer. When you are connecting two or more Epson printers of the same
model using AppleTalk, you must rename the printer to
distinguish it from the other printers. In this case, follow the steps
in the “Rename the Printer” section.

Using Chooser to Set Up Your Printer

Selecting EpsonScript

1.
After you choose the settings in
Page Setup...,
you
Press on the Apple menu and hold down. Then drag down to
Chooser.
The
Chooser
window displays.
APPleTelk
~~
Zones:
App’eTa’k 0 Inact$ve
@Active
Setting Up Your Macintosh
7:
2-1
Loading...
+ 36 hidden pages