Start Here
Follow the steps on this card to get started with your BrightLink:
1 |
Connect your computer and turn on the projector |
|
Make sure the software is installed |
3 |
Calibrate |
|
• Using the remote control |
4 |
Use the pens |
|
• Choosing the right tool |
Use the built-in toolbar
BrightLink Interaction
The BrightLink interactive pens turn any wall or table into an interactive area, either with or without a computer.
•With a computer, you can use Easy Interactive Tools (dual pens). This software lets you use the pen as a mouse to annotate, save, and interact with content from your computer.
•Without a computer, you can use the toolbar that is built into the projector (single pen). This lets you annotate images from a document camera, tablet, DVD player, or other source connected to your projector.
Students and colleagues can connect their own laptops and annotate on the fly using the built-in toolbar, without installing software.
Get a DVD containing BrightLink training videos!
Just click the BrightLink Training Resources link on your desktop or go to www.epson.com/eduresources and request a DVD.
1 |
Connect the USB cable directly to any available |
|
USB port on your computer. |
6 Select Use Source and press Enter.
USB cable
2 |
Connect an HDMI or VGA cable from the projector |
|
to your computer. |
|
HDMI |
|
VGA |
3 |
Turn on the projector by pressing the red power |
|
button on the remote control. |
In Windows®, you may see messages about device drivers or new hardware.
|
Depending on how your computer is connected to |
|
the projector, you may need to select your source |
|
for computer interaction. |
4 |
Press the Menu button on the remote control, select |
|
the Extended menu, and press Enter. |
5 |
Select the Easy Interactive Function setting and |
|
press Enter. |
7 |
Select the source where your computer is |
|
connected. For example, if your computer is |
|
connected with a VGA cable to the projector’s |
|
Computer1 port, select Computer1. If your |
|
computer is connected with an HDMI cable, select |
|
HDMI. |
|
If you don’t know which source to select, check |
|
with your school’s tech coordinator. |
8 |
Display an image from your computer. If the image |
|
doesn’t appear, try one of the following: |
•On some Windows laptops, you may need to hold down the Fn key on the keyboard and press F7 or the function key that lets you display on an external monitor. It may have an icon such as , or it may be labelled CRT/LCD.
•On a Mac®, you may need to open System
Preferences and select Displays. Select the
VGA Display or Color LCD option if necessary, then click the Arrange or Arrangement tab, and select the Mirror Displays check box.
•Try pressing the Source Search button on the remote control.