EPOS Touch Vision 1553 User Manual

Page 1
ePOS TOUCH VISION 1553
www.eposcom.ru
USER MANUAL
Page 2
Contents
www.eposcom.ru
ABOUT THIAS MANUAL........................................................................................ i
WARNING.............................................................................................................. i
WARRANTY LIMITS .............................................................................................. i
TRADE MARKS AND SERVICE MARKS ..............................................................ii
IMPORTANT SAFETY INFORMATION ..................................................................ii
1.1 Unpacking ....................................................................................................... 2
1.2 Product Overview ............................................................................................ 3
1.3 I/O Ports and Connectors................................................................................ 5
1.4 Specifications .................................................................................................. 6
2. Monitor Setting ....................................................................................................... 7
2.1 OSD Control Panel.......................................................................................... 7
2.2 On-Screen Display .......................................................................................... 8
3. Peripherals & Driver Installation ......................................................................... 10
3.1 Second Display ............................................................................................. 10
3.2 Pole-type Customer Display...........................................................................11
3.3 Touch Screen Driver...................................................................................... 12
4. Peripherals Testing .............................................................................................. 16
4.1 Magnetic Stripe Card Reader........................................................................ 16
4.2 Customer Display .......................................................................................... 17
1
Page 3
1. Introduction
www.eposcom.ru
The PPD series offers high-quality, durable LCD touch screen that comes with a steady
aluminum die-casting base and standard 75mm VESA mounting holes. The PPD is designed
with the ability to integrate with any POS peripheral devices, such as speakers, rear top mount
or pole type customer display, magnetic card reader, and second monitor.
1.1 Unpacking
The contents may vary with different options. If there’s any physical damage or missing parts,
please contact your supplier immediately. Please keep all packing materials in case you need
to ship back the device for service.
POS Monitor 12.1”/15”/17” (For PPD-1210/1500/1700)
Touch Cable (USB or RS-232 Interface)
AC Power Cord (US, EU or UK)
Support CD
Options
Speakers (Pre-installed, Internal, 2W x 2)
Magnetic Stripe Card Reader (PS2, USB, or RS-232 Interface)
Second Monitor 10.4”/12.1”/15”
Customer Display (Pole-type or Rear Top Mount)
2
Page 4
www.eposcom.ru
1.2 Product Overview
z Front View
z Rear View
z Side View
3
Page 5
Bottom View
www.eposcom.ru
4
Page 6
www.eposcom.ru
1.3 I/O Ports and Connectors
A. PS/2 interface MSR cable B. USB interface MSR cable C. RS-232 interface MSR cable D. USB interface touch cable E. RS-232 interface touch cable F. Audio cable G. VGA cable
5
Page 7
1.4 Specifications
www.eposcom.ru
Model
TFT LCD
Brightness
Resolution
Touch Screen
Tilting Angle
Serial
USB
RJ 45
VGA
Audio In
Option
VESA
Power Input
Color
Compliance
Weight
Dimension (W x H x D:
Operating Temperature
Storage Temperature
Storage Humidity
Display
PPD-1700 PPD-1500 PPD-1210
17” 15” 12.1”
300 Nits 250 Nits 180 or 400 Nits
1280 x 1024 Pixel 1024 x 768 Pixel
5 Wire Resistive Type, 25-Point Calibration
15 ~ 80 Degrees
I/O Ports
RS-232 DB-9 x 2 (Optioned Touch x 1, MSR x1)
USB2.0 x 1 for Touch Panel
PS2, or USB Optioned for MSR
1 x DB-15, Female, Support up to XGA / SXGA at 75Hz
1 x Audio Jack with Internal Speaker 2W x 2
Others
MSR, VFD, 2
nd
Display, Speaker
75mm
12VDC 48W 12VDC 24W
Black or Silver Optioned for Front Panel
FCC / CE / WEEE / RoHS
6.4 Kg 5.4 Kg 5 Kg
416 x 370 x 330 356 x 340 x 305 305 x 320 x 305
5°C ~ 40°C
-20°C ~ 60°C
20% - 80% RH, Non-condensing
6
Page 8
2. Monitor Setting
www.eposcom.ru
2.1 OSD Control Panel
Button Function
Power Turn on/off the monitor
Auto Adjust
Up
Down
Menu Activate the OSD menu and enter/select the function.
a. Automatically optimize and adjust the screen settings.
b. Exit the OSD menu.
a. Increase the volumn.
b. Increase the value of the function selected or move to the
previous function as the OSD menu is active.
a. Decrease the volumn.
b. Decrease the value of the function selected or move to the next
function.
7
Page 9
www.eposcom.ru
2.2 On-Screen Display
OSD Main Menu Item Description
Color
Image Setting
Contrast Adjust the degree of
difference between lightness and darkness.
Brightness Adjust the balance
between lightness and darkness.
Color Adjust Set the value of red,
green, and blue. Color Temp Contain 5 color modes. Back Go back to menu. Clock Adjust the pixel clock
frequency. Phase Adjust the pixel clock
signal. Sharpness Adjust the clarity and
visibility of the edges.
Position
OSD Menu
Language
Back Go back to menu. H.Position Adjust the horizontal
position of the screen
image. V.Position Adjust the vertical position
of the screen image. Back Go back to menu. OSD H.Pos Adjust the horizontal
position of the OSD menu. OSD V.Pos Adjust the vertical position
of the OSD menu. OSD Timer Adjust the display time of
the OSD menu. Back Go back to menu. English Set the OSD menu
language to English. French Set the OSD menu
language to French.
8
Page 10
Germany Set the OSD menu
www.eposcom.ru
language to Germany.
Spanish Set the OSD menu
language to Spanish.
Chinese Traditional Set the OSD menu
language to Chinese
Traditional.
Chinese Simple Set the OSD menu
language to Chinese
Simple.
Japanese Set the OSD menu
language to Japanese.
MISC.
Exit Exit the menu.
Signal Source D-SUB (analog) input only.
Reset Reset all settings to the
default values.
.unem ot kcab oG kcaB
9
Page 11
3. Peripherals & Driver Installation
www.eposcom.ru
3.1 Second Display
a. Pass the cord through the hole. Plug the
cable into the VGA port on a PC.
Connect the extension power cord and
plug the power adaptor to an AC outlet.
b. Tighten the bundled screws specified for
the stand of the second display to fix it
to place.
10
Page 12
3.2 Pole-type Customer Display
www.eposcom.ru
a. Pass the cord through the hole. Plug the
cable into a free COM port on a PC.
Connect the extension power cord and
plug the power adaptor to an AC outlet.
b. Press the stand of the customer display
into place.
Note
The rear top mount customer display is pre-installed in factory.
11
Page 13
3.3 Touch Screen Driver
www.eposcom.ru
a. Double click the folder “Touch” “5W Resistive” and then double click the subfolder according
to the operating system.
b. Double click the file “setup” to start the installation.
c. Click “Next” on the welcome window.
d. Select the destination folder and click “Next.”
e. Click “Next”.
12
Page 14
www.eposcom.ru
f. Click “Install” to start the installation.
g. Click “Finish” to exit the setup and restart the system.
13
Page 15
Execute All Programs \ Touch Package \ Touch Tool. Select “General” and then click “9 Pts.
www.eposcom.ru
h.
Linearity” to start the 9-point-calibration. Or select “Advance” to select “4 Pts. calibration” or
“25 Pts. Linearity”. The more points are calibrated, the more accurate the calibration will be.
i. Press the red dot on the screen with a finger till it disappears. The dot will appear 4/9/25
14
Page 16
times in turn on the screen.
www.eposcom.ru
j. After the calibration is done, click the lower button to save it.
Note
Refer to the file “Userguide2_8” for more information on the setting of the touch package.
15
Page 17
4. Peripherals Testing
www.eposcom.ru
If the PPD is equipped with magnetic stripe card reader or customer display, follow the steps
below to test the function.
4.1 Magnetic Stripe Card Reader
a. Open the folder “Peripherals” “MSR” and double click the file “BREAKOUT.exe”.
b. After the testing window pops up, slide a magnetic stripe card and its information will show
on the window.
16
Page 18
4.2 Customer Display
www.eposcom.ru
a. Open the folder “Peripherals” “Customer Display” and double click the file “BREAKOUT.exe”.
b. Enter any keys on the window and the typed words will appear on the customer display.
ePOS Components
17
www.eposcom.ru
Loading...