EWS
Point of Entry, Two Stage Cartridge Filtration Unit
Model: CS-BB-FUGAC200A-1 application for 3/4” to 1” lines
For any larger service lines - see the EWS or CWL Series of whole home water
ltration for proper ow rates to the home and longevity of ltration media instead
of routine lter cartridge replacements.
Point of entry cartridge ltration unit contains a string wound pre-sediment lter which prevents premature
clogging and a Radial Flow Carbon post-lter. For the initial budget conscious consumer looking for the
benets of water ltration throughout the home with yearly lter replacements**.
Improves taste, clarity and odor by removing chlorine and other volatile organic compounds. The 50 micron
pre-sediment lter serves to remove suspended matter, dirt, rust and sediment and improves performance
of the post-lter. Meets or complies with NSF Standard 42 and 61.
* Powder Coated, Corrosion Resistant Bracket Mounts Easily
* 20” Heavy Duty Housings Contain our Full Sized, Full Bed
Depth Cartridges for Optimum Performance and Longer Life
* Replacing Filters is Easy; Use the Included Spanner Wrench
to Spin Housings Off and On.
Benets:
* Improves Taste, Clarity and Odors
* Removes Chlorine and VOC’s
* Reduces Dirt, Silt, Sediment and Rust
* Replaces Costly Bottled Water
* Better Tasting, Quality, Filtered Water for Coffee,
Tea, Juices and Ice
* Quality Water Throughout the Home
Applications:
* Installs Easily at any Point of Entry Location
* For All Your Needs - Drinking and Cooking, Showering
and Bathing, Skin Absorption and Inhalation
* Safe for People, Pets and Plants
Pictured:
Fully Assembled CS-BB-FUGAC200A-1
All completely assembled units include the following standard features:
Blue 20” housing with full bed depth ltration cartridges, spanner wrench to open housings for
easy lter replacement, simple to use mounting bracket
Upgrade Options:
EWS/CWL Series for Whole Home Filtration:
Filtration media lasts up to 10 years before replacement and have superior ow rates with no observed pressure or ow
rate loss. Filtration of self-cleaning EWS or CWL media does not degrade over usage like POE cartridge units between
needed or routine lter cartridge(s) change-out
Sink Filtration or Drinking Water Upgrade Options, Based on Consumer Preference, Need or Local Water Conditions:
For the additional drinking safeguard of lead and cyst removal (DWS)
For the additional drinking safeguard of bacterial, viral, e-coli and/or microorganism safeguard (DWS-UV)
Reverse osmosis (RO3), if applicable based on consumer preference or local water issues
ALL FILTRATION PRODUCT PROUDLY MADE & ASSEMBLED IN THE USA
www.ewswater.com O: 702.256.8182; M-F 8:30am-4:30pm PST E: customerservice@ewswater.com
EWS
SET-UP, INSTALLATION OF UNIT & BYPASS AND START-UP:
(1) Shut off main water supply.
(2) Install at main, point of entry or designated water line using proper plumber supplied pipe, ttings,
unions and ball (shut-off) valves to the inlet, outlet and bypass of the unit.
(3) Install a bypass with proper ball valves before inlet and after outlet of unit and on bypassed line. (Note) Make
sure unions are installed between the inlet and outlet of the unit and the installed ball valves for future unit servicing.
(4) Once unit installation and bypass is complete, open main water supply.
(5) Slowly open (less than 1/2 regular ow rate or less than 5 gpm) inlet of unit and close bypass. Keep outlet of
unit closed and allow unit to ll slowly. Check unit at inlet connections, housings, bracket and housing connections.
(6) Once lled, open inlet and outlet of unit completely. Check all connections.
(7) Flush unit of carbon nes. Find nearest faucet to the unit, remove aerator or any restriction, and open cold side
only. Allow carbon nes to ush through faucet until water runs clear. Open all faucets to clear air in lines.
(8) Afx a plumber service label or card on unit and record installation date. Leave this booklet and warranty booklet
with unit and/or consumer. Replace lters up to one year after initial installation and/or at regular or needed intervals.**
Technical Information: CS-BB-FUGAC200A-1
REPLACEMENT FILTERS
Part No. Description Replacement Time**
BB-PRESED-50-SW 50 Micron String Wound Sediment Cartridge Up to a Year
BB-GACB-10-RFA 20” Carbon Block Radial Flow Cartridge Up to a Year
FILTER SPECIFICATIONS:
Pre-Filter: BB-PRESED-50-SW
Construction: 100 % Pure Polypropylene Fibers
Dimensions: 4 1/2 in. x 20 in. (11.4 cm x 51.0 cm)
Micron Rating: 50 µm Nominal
Initial Pressure Change: 1.00 psid @10.0 GPM
Fits all Standard 20 in. Housings
Meets FDA Requirements for food and beverage contact.
Filter: BB-GACB-10-RFA
Vibration Packed Radial Flow Granular Activated Carbon Block
Dimensions: 4 1/2 in. x 20 in. (11.4 X 51.0 cm)
Micron Rating: 20 µm Nominal
Initial Pressure Change: 3.00 psid @7.0 GPM
Chlorine Reduction: 40,000 Gal. @ 7.0 GPM based
on 2ppm chlorine with greater than 90% reduction
Fits all Standard 20 in. Housings
Cartridge is Tested and Certied by International
ANSI/NSF Standards 42 and 61 - Conforms to requirements.
System Weight: 29 lbs./ 13.18 Kgs.
System Size: 8 5/8 in. W x 15 3/8 in. L x 26 1/4 in. H / 21.6 cm x 38.8 cm x 66.5 cm
Min/Max Water Temperature: 40º / 100 ºF - 4.4 / 37.8 ºC
Max Water Pressure for 20” Housings: 100 PSI / 6.2 Bar
Initial Pressure Change of Vessel without Filters: 1.00 psid @15.0 GPM
WARNING: It is recommended that working pressure does not exceed or surge above 75 PSI and that a working PRV be installed to
control high household pressure and/or pressures surges.
CS-BB-FUGAC200A-1 Housing Inlet/Outlet Size: 1” Flow Rate : <10.0 GPM / 37.85 LPM
Designed system ow rates to insure proper ltration tolerances.
Pictured:
CS-BB-FUGAC200A-1 with Spanner Wrench
and lter cartridges,
BB-PRESED-50-SW and BB-GACB-10-RFA
SHIPPING INFORMATION: Carton Size.:16 in. W x 10 in. L x 28 in. H
**Up to one year or as needed, based on local water conditions, usage and ow rates. Diminished ow rate or ltration issues
indicates cartridge change needed. Application for known municipally treated or well water of known quality. All waranties and
application requirements apply. For other performance requirements or applications, other models are available.
ALL FILTRATION PRODUCT PROUDLY MADE & ASSEMBLED IN THE USA
www.ewswater.com O: 702.256.8182; M-F 8:30am-4:30pm PST E: customerservice@ewswater.com