Eneo VKCD-1329ASFM User Manual

CCTV MINI VANDAL DOME CAMERA

700TVL High Resolution Mini Dome Camera

CAUTION

RISK OF ELECTRIC SHOCK

TO REDUCE THE RISK OF ELECTRIC SHOCK,

CAUTION :

DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICINGTO QUALIFIED
SERVICE PERSONNEL.

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to
alert the user to the presence of impor tant operating and maintenance
(servicing) instructions in the literature accompanying the appliance.

Regulatory Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including inter ference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause interference, in which case the user will be required to correct the interference at
his own expense.

WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:

Do NOT use other than specified power source.
Do NOT expose this appliance to rain or moisture.

This color video camera is designed for use in monitoring systems.

- IP66 Rating, Aluminum Die-casting Rugged Vandal proof Camera (Surface mount)

- 1/3” 520K Color IT-CCD

- Digital Clamp (with Anti-smear)

- ACE(Digital WDR)

- De-Fog

- Edge Adaptive 2-D Digital Noise Reducer

- Electronic IRIS

- Enhanced Y/C Separator (De-Mosaic, De-Moiré)

50

DC12V

Power and Video connection

Video Out

Power(+)

GND

GND

OSD Control Key(optional)

L

DOWN

UP

R

Unpacking

Below items should be included with the camera.
Please check the items before use.

Surface Mount

Manual

Flush Mount

Manual

Camera Structure

Surface Mount

STOPPER RING

DECORATION RING

DOME COVER

Camera

Camera

SET SCREW

Installation Screws

Installation Screws

CAMERA BRACKET

L-wrench Set Screw

L-wrench Set Screw

BASE HOUSING

Yellow, Video output

Red, Power input

SCREW

CAMERAPower(12V), Video

Ceiling processing sticker

Ø67

Center/Centre/Centro
Mittelpunkt
To be symmetrically placed
from the center
A placer symetriquenent par
rapport au centre

67mm

instalar simetricamente a la
perforcion del techo
Symetrisch am
Mittelpunkt ausrichten

Center Ø67

Ceiling processing sticker

Flush Mount

CAMERA BRACKET-BOTTOM

BASE HOUSING

SUPPORT

SCREW

Optional cable:

Optional joystick cable to
set OSD menu

CAMERA BRACKET-TOP

CAMERA AAS’Y

Surface mount

① Fix the BASE HOUSING to the desired

place with screws supplied.

② Adjust desired scene by turning and

moving the CAMERA BRACKET.

③ Put the DOME COVER over the BASE

HOUSING and turn it clockwise
by hand.

④ To fix DOME COVER tight, use SET

SCREW.

Dimensions(mm)

Sureface Type Flush Type

60.50

Ø57.00

37.00

Ø80.00

B.C.DØ72.00

Ø3.90

Ø57.00

58.50

Ø88.00

3-Ø3.90

Ø67.00

Flush mount

① Use “Ceiling processing sticker” on

the desired place to install camera

and make a hole on that place.

② Place the BASE HOUSING on the

hole and fix it with screws supplied.

③ Adjust desired scene by turning and

moving the CAMERA BRACKET.

④ Put the DOME COVER over the BASE

HOUSING and turn it clockwise by
hand.

Specifications

Signal Format

Image Device
Resolution
Total Pixels
Effective Pixels
Shutter Speed
Sync. System
S/N Ratio
Iris Control
Video Output
Temperature
Power supply
Humidity
Power Consumption

Specifications are subject to without notice.

VKCD-1329ASxM

1/3＂ 520K Color IT-CCD

700 TV Lines

607K pixels
568K pixels

1/50 ~ 120,000sec

Internal

More Than 50dB

Electronic

Composite ( 1.0Vp-p/75 Ohm )

-10℃ ~ +50℃
DC 12V(±10%)

RH 85% MAX

Max.1.5W