Eneo VKC-900IR36 User Manual

Full Manual

1/3" Camera, Day&Night, 900TVL,

Infrared, 12VDC

VKC-900IR36

VKC-900IR2812

EN

Notes on safety .................................................................................................2

Overview .............................................................................................................2

Introduction ................................................................................................................................. 2

Functions and Features ............................................................................................................ 2

Hardware Connection ........................................................................................3

Power and Video Cables .......................................................................................................... 3

Function Keys .............................................................................................................................3

Device Dimensions ............................................................................................5

Components and Functional Description ........................................................6

Device Installation ..............................................................................................7

Function Menus ..................................................................................................9

OSD Main Menu ......................................................................................................................... 9

Image Setting Menu .................................................................................................................. 9

Advanced Setup Menu ...........................................................................................................10

Technical Specifications ..................................................................................12

Further information .........................................................................................14

DE
EN

1

Notes on safety

Please also pay attention to the enclosed safety instructions, and carefully read
through this instruction guide before initial operation.

Important points of advice are marked with a caution symbol.

Overview

Introduction

The product is a 900 TVL infrared bullet camera that uses a SONY 1/3“Exmor
CMOS image sensor which can capture high-quality and high-resolution images.

Functions and Features

• High sensitivity: The camera uses a SONY 1/3“Exmor CMOS image sensor
and has an illumination as low as 0.01 Lux. When infrared-ray (IR) LEDs are on,
the illumination can reach 0 Lux.

• On-screen display (OSD) menus: The camera provides OSD menus that sup­port six languages, facilitating commissioning and setting camera parameters.

• Digital noise reduction (DNR): The camera uses 3D DNR technology that signi­ficantly optimizes images in low-illumination environments by improving signal to
noise ratio (SNR).

• High resolution: The horizontal resolution is up to 900 TVL, which makes the
image clear and fine.

• Privacy masking: The camera allows you to define a maximum of 8 quadrilate­ral mask areas, which meets privacy requirements.

• Built-in mobile optical filter (optional)

• Intelligent IR technology: The intelligent IR technology enables the camera to
adjust shutter, aperture, and gain depending on image brightness in black and
white mode, optimizing the infrared effect and preventing center overexposure.

• Built-in efficient IR-emitting tubes: With the built-in tubes, the camera can cap­ture quality images even in total darkness and the nighttime.

2

Hardware Connection

Power and Video Cables

Figure 2-1 shows the power and video cables.

Power and video cables

Figure 2-1

Connect the BNC connector of the power or video cable to a video signal cable and
connect the other connector to a low-voltage power cable (12 V DC). After installing
the camera, directly connect the video cable and power cable.

The BNC video output interface is used to emit composite video signals. Monitors
with a resolution of higher than 800 TVL are recommended.

DE
EN

Function Keys

A user can call OSD main menus through multi function switch control keys, and
check and set camera parameters.

Figure 2-2 shows the camera function keys.

OSD menu control key: It is used to enter OSD menus or select menu items when
you press this key in the middle of the multi function switch.

Figure 2-2

3

UP/DOWN keys: The UP and DOWN keys are used to select menu items upwards
and downwards by prodding the multi function switch upwards and downwards.

LEFT/RIGHT keys: The LEFT and RIGHT keys are used to select menu items hori­zontally or modify parameters by prodding the multi function switch towards the left
or the right.

When you prod the multi function switch upwards and downwards, the menu items
rapidly roll upwards and downwards accordingly; and when you prod the multi func­tion switch towards the left or the right, the parameter values will rapidly decrease or
increase.

4