Eneo VKC-14140F2810IR, VKC-14140F650IR Full Manual

Full Manual

1/3” Day/Night Camera with IR Illumination

VKC-14140F2810IR

VKC-14140F650IR

EN

Safety Precaution

03

ULTRA CLEAR RESOLUTION CAMERA

CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.

The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.

Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.

ULTRA CLEAR RESOLUTION CAMERA

Safety Precaution

04

NOTICE

The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
Avoid installing areas where has shock or vibration which results in the problems.

Pay attention to safety when laying the connection cable and observe that the cable
is not subjected to heavy loads, kinks or damage and no moisture can get in.
Never open the device such as boards or lens.
The warranty becomes void if repairs are undertaken by unauthorized persons.
Maintenance and repair have to be carried out only by authorized service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical specifications.
This can lead to destruction.
The camera should never be operated in water.

ULTRA CLEAR RESOLUTION CAMERA

Contents

05

Safety Precaution

p.03~04

Contents

p.05

Features

p.06~07

Composition

p.07

Dimensions

p.08

Part Names

p.09

Installation Instructions

p.10~11

Operating Instructions

p.12~31

Specifications

p.32~33

ULTRA CLEAR RESOLUTION CAMERA

Features

Key Features

06

• 1/3” High density Sony CCD (960H)

• 750TVL High-Resolution

•

True WDR (Wide Dynamic Range)

• TDN with Dual Filter Switcher

• Selectable f=2.8~10mm F1.4 Mega-pixel, DC Auto Iris vari-focal lens
f=6~50mm F1.4 DC Auto Iris vari-focal lens

• Improved noise reduction 2D+3DNR

• Improved IR-Optimizer

• DIS(Digital Image Stabilizer), LSC (Lens shading compensation)

• Scene preset select, Motion detection, Polygon privacy mask(up to 15),

E-Zoom, Defog, Sens-up, BLC/HLC, Flickerless, Anti-CR, Flip
IR Shade compensation

• External Zoom & Focus adjustment

• IR-LED 70pcs

• LED ON/OFF Control

• Up the Coaxial (UTC) communication

• RS-485 control (Option)

• OSD MENU & Video Sub-out port for easy installation & maintenance

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• Dual Window, 3-Axis bracket

• IP67 protection

ULTRA CLEAR RESOLUTION CAMERA

General Description

• With ICR mechanism,

- Enhances its sensitivity about 10x at night time

- Can accepts the infrared light

This is an ultra-clear resolution camera which realizes over 750TVL resolution
and a crisp color reproduction with SONY 960H CCD and Effio-V(Effio-A)
Enhanced image signal processor.

Features

07

Composition

Operating
Instruction

Camera

Mounting
Template

Torque Wrench:

3mm (1pc)
5mm (1pc)

Mounting Screw:
4 x 30mm (4pcs)

Plastic Anchor:

6 x 30mm (4pcs)

Video Sub-out

Cable (1pc)

•

With Effio-V Enhanced digital imaging system,

- Delivers the crystal clear images providing 750TVL resolution in conjunction

with SONY 960H High density CCD.

- VKC-14140F2810(650)IR are provided ‘TRUE WDR’ function

- Color signal processing provides the optimum balance between the luminance
and chroma signals for high color reproducibility even for the detail scene
which contains very high spatial frequency.

- Incorporates 2D+3DNR signal processing.

Cable Signal
Sticker

Wiring Connector:

(1pc)

ULTRA CLEAR RESOLUTION CAMERA

08

Dimensions

(unit : mm)

Ø100

115

94

225

175

214

297

ULTRA CLEAR RESOLUTION CAMERA

Part Names

09

CAUTION

• Care should be taken the cable is NOT to be damaged, kinked or exposed
in the hazardous area.

• Do not expose the camera directly to a strong light source such as the sun
or spot light.

REAR

VIEW

FOCUS / ZOOM
adjusting Screws

DUAL WINDOW

SUN-SHIELD

SUN-SHIELD
FIXING BOLT

POWER
CABLE

FRONT CASE

OSD Setup

CONTROL COVER

BRACKET

REAR CASE

ULTRA CLEAR RESOLUTION CAMERA

Installation Instructions

10

Torque Wrench (5mm)

Pan & Tilt adjustments

• Unlock the screw on the camera
bracket through using the torque
wrench(5mm) supplied.

• Set the camera’s viewing angle
then lock the screw on the bracket.

Tilt

Inclination

Pan

1. Locate the mounting template at the installation position and drill the wall.
Insert the anchors to the drilled holes

2. Place the bracket on pre-drilled position and fix it through using mounting
screws.

3. Route the Power cable to the connecting place.
Fix the camera bracket through using mounting screws (4x30mm).

4. Set the camera’s viewing angle and adjust zoom/focus of lens by using the
torque wrench.

Mounting Screw
: 4x30mm

1

Plastic Anchor
: 6 x 30mm

2

ULTRA CLEAR RESOLUTION CAMERA

Installation Instructions

11

Zoom & Focus adjustments

• Turn the Focus gear to “N”(Near) or

“∞”(Far) until the sharpest focus is

made.

• To widen the viewing angle, turn the
Zoom to “W”(Wide) and to obtain
a closer view, turn it to “T”(Tele)

Use the torque wrench supplied.

Installation and commissioning Instructions

• Make sure the power is removed before the installation.

• Follow the order for applying power.
First, connect the low voltage (AC24V or DC12V), then plug the AC adapter to

AC outlets to avoid an improper reset from power jitter and a damage from the

surge voltage when no load.

Power Supply Connections

Camera can work with either 24VAC or 12VDC, dual voltage power.
Primary and secondary grounds are completely isolated to avoid the possible
ground-loop problems.

VIDEO (BNC)

AC24V/GND (Black wire)

AC24V/DC12V (Red wire)

RTX- (Gray wire)

RTX+ (White wire)

※ Attach the Signal Assignment Sticker
in a visible spot for wiring reference.