Eneo VKC-1338/PIR Instruction Manual

1

Instruction Manual

Hidden CCD Camera VK-1321/PIR (B&W),
VKC-1338/PIR (Colour)

2

Contents

1. Safety Instructions ......................................................................................... 3

2. Description ....................................................................................................

4

3. Installation ..................................................................................................... 5

4. Wiring Instructions .........................................................................................

6

5. PIR Detector Board Installation and Descriptions ............................................

7

6. Specifications .............................................................................................. 10

7. Dimensional Drawings .................................................................................

12

3

1. Safety Instructions

• Read these safety instructions and the operation manual first before you install
and commission the camera.

• Keep the manual in a safe place for later reference.

• Protect your camera from contamination with water and humidity to prevent it
from permanent damage. Never switch the camera on when it gets wet.
Have it checked at an authorized service center in this case.

• Never operate the camera outside of the specifications as this may prevent the
camera functioning.

• Do not operate the cameras beyond their specified temperature, humidity or po

­wer ratings. Operate the camera only at a temperature range of -10°C to +50°C
and at a humidity of max. 90%.

• To disconnect the power cord of the unit, pull it out by the plug.
Never pull the cord itself.

• Pay attention when laying the connection cable and observe that the cable is not
subject to heavy loads, kinks, or damage and no moisture can get in.

• The warranty becomes void if repairs are undertaken by unauthorized persons.
Do not open the camera housing.

• Never point the camera towards the sun with the aperture open.
This can destroy the sensor.

• Installation, maintenance and repair have to be carried out only by authorized
service centers. Before opening the cover disconnect the unit from mains input.

• The fitter is responsible for the system of protection being followed in accordance
with the technical data, e.g. by sealing of the cable outlet with silicone.

• Contact your local dealer in case of malfunction.

• Only use original parts and original accessories from Videor E. Hartig GmbH.

• Do not use strong or abrasive detergents when cleaning the housing. Use a dry
cloth to clean the dome surface. In case the dirt is hard to remove, use a mild
detergent and wipe gently.

NOTE: This is a class A digital device. This digital device can cause harmful

interference in a residential area; in this case the user may be required
to take appropriate corrective action at his/her own expense.

4

2. Description

This B/W (Colour) HIDDEN CCD Camera uses high sensitive 1/3” interline transfer
CCD Image Sensor (CCD = Charge Coupled Device), and all state circuitry which
provides extremely long life and high reliability.

This Camera offers excellent image quality with low lag and high burn resistance,
and is not subject to distortions from magnetic fields.

Highly resistance to shock and vibration, and easy to install this Camera is a very
good choice for your B/W (Colour) CCTV system.

• For Wall Mount

• Resolution of 600 Horizontal Lines

(VK-1321/PIR, # 91989)

Resolution of 470 Horizontal Lines (VKC-1338/PIR, # 91991)

• Built-in Pinhole Lens F2.0/3.7mm

• Electronic Shutter Control (ESC)

(VK-1321/PIR, # 91989)

Automatic Shutter Control (AES) (VKC-1338/PIR, # 91991)

• Automatic Gain Control (AGC)

• Automatic White Balance (AWB)

(VKC-1338/PIR, # 91991)

• Internal Synchronization

• PIR Sensor Function

• Supply Voltage: 12VDC

• Easy installation