Eneo TVD-2080Z03IR User Manual

EN

User Manual

1/2.8” HD-TVI Dome, Fixed,
Day&Night, 1920x1080, 3x AF
Zoom, Infrared, 3D-DNR, 12/24V

TVD-2080Z03IR

Safety Precaution

03

FULL-HD AF-ZOOM CAMERA

CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.

Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.

The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.

Safety Precaution

04

FULL-HD AF ZOOM CAMERA

NOTICE

The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
Avoid installing areas where has shock or vibration which results in the problems.

Pay attention to safety when laying the connection cable and observe that the cable
is not subjected to heavy loads, kinks or damage and no moisture can get in.
Never open the device such as boards or lens.
The warranty becomes void if repairs are undertaken by unauthorized persons.
Maintenance and repair have to be carried out only by authorized service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical specifications.
This can lead to destruction.
The camera should never be operated in water.

Contents

05

FULL-HD AF ZOOM CAMERA

Safety Precaution

p.03~04

Contents

p.05

Features

p.06~07

Composition

p.07

Dimensions

p.08

Part Names

p.09

Installation Instructions

p.10~13

Operating Instructions

p.14~29

Specifications

p.30

Features

Key Features

06

FULL-HD AF ZOOM CAMERA

• Full HD, 2Mega Pixel HD-TVI CAMERA, 1920x1080(30p/25p)

• TVI Video Transmission Distance over Coax.; 500M (RG59, 75Ω)

• Automatically removable IR Cut filter by Dual filter switcher

• Built-in f=3~9mm, F1.2~F2.1 Day & Night zoom lens

(Optical 3x Auto focus zoom / Digital 32x zoom)

• Focusing Status Indicator on Screen

- ★(Blue) Focusing in process

- ★(White) Focusing Completed

• True WDR(Wide Dynamic Range)

• Improved Noise figure with the enhanced 3D-NR

• Pointing Zoom which enables the flexible zooming at any area.

• Smart Motion Zoom in combining with Pointing Zoom.

• Preset Zoom

• Home Position setting

• Motion Detection, Privacy Mask, Defog, Sens-up(x32), BLC/HLC,

H/V/HV Flip, LSC(Lens Shade Compensation), Motion Deblur,

Pixel Defect Compensation, Lens Refresh, Lens Initializing Set

• ID / TITLE / ZOOM RATIO DISPLAY

• Enhanced Sensitivity by DSS technology

• Top performance at low light sensitivity (Sens-up On)

• OSD menu & Video sub-out for easy installation & maintenance.

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• Remote control via RS-485 (Pelco-D/P)

• UTC Control through HD-TVI DVR

• Built-in 2pcs High-power LED

• Double side Anti-Scratch Hard coated clear bubble

• Flush mount (option: Surface mount and various adaptors)

• Built-in 3-Axis Gimbal

• IP67 / IK10 Protection

• AC24/DC12V Dual power

General Description

• With ICR mechanism,

- Enhances its sensitivity about 10x at night time

- Can accepts the infrared light

• With 24VAC/12VDC dual power design,

- Offers the flexibility of installation

- Ensures the reliability

This camera realizes the natural and crisp image as you see the scene in front
of you by adopting Auto Focus Full HD(1920x1080p) camera module.
Highly detailed pictures can be achieved and color reproducibility deserves
attention.

Features

07

FULL-HD AF ZOOM CAMERA

Composition

Mounting Template

Cable Signal
Sticker

Operating
Instruction

Torque Wrench:

3mm (1pc)

Video Sub-out

Cable (1pc)

Mounting Screw:
4 x 30mm (3pcs)

Plastic Anchor:

6 x 30mm (3pcs)

Dome Camera

Wiring Connector

(1pc)

Connector fixing Screw:

2.5 x 5mm (1pc)

Dimensions

08

FULL-HD AF ZOOM CAMERA

Ø140

119

PCD Ø120

Ø102
Ø140

3-Ø4.2

82

(unit : mm)

Part Names

09

FULL-HD AF ZOOM CAMERA

BUBBLE DOME

3-AXIS GIMBAL

DOME COVER

SAFTY WIRE

FLUSH MOUNT

ZOOM LENS

OSD CONTROL

JOY STICK

POWER CABLE

VIDEO (BNC)

POWER CABLE

[ BOTTOM VIEW ]

POWER SUPPLY
CONNECTOR

POWER

CABLE

Installation Instructions

10

FULL-HD AF ZOOM CAMERA

1. Locate the mounting template at the installation position and drill the ceiling
or wall if needed.

2. Open the dome cover by loosening screws(4x12mm). Use the torque wrench
supplied.

3. Set the camera’s viewing angle.

4. Put the dome cover to the dome base unit and tighten the assembly screws.

- Place the dome base unit on pre-drilled position and fix it through using mounting
screws (4x30mm).

- Route the Power cable to the connecting place.

• Surface mount

• Pole mount adaptor

• Tilted mount

• Wall mount
(Requires additional
Surface mount)

• Tilted junction mount

■ Optional Mounting Accessories

Mounting Screw

(4x30mm)

Plastic Anchor

(6x30mm)

Torque
Wrench