Eneo TSD-52F0013P0A User Manual

User Manual

EN

1/3" HD Dome, Fixed, Day&Night,
1920x1080, Infrared, 1,34mm, 360°,
Indoor, 12VDC

TSD-52F0013P0A

2

Table of Contents

General safety instructions .............................................................................................. 3

1. Product Features .......................................................................................................... 5

2. The Overview ................................................................................................................ 6

3. Installation ..................................................................................................................... 7

3.1 Connections ................................................................................................................................ 7

3.2 Separate the main body of the camera and the base .................................................................. 7

4. Menu Operation ............................................................................................................. 8

4.1 Main Menu ................................................................................................................................. 9

4.2 Video Type ................................................................................................................................ 10

4.3 Video Setting ............................................................................................................................ 11

4.4 System....................................................................................................................................... 13

4.4.1 Updating System Firmware ............................................................................................................................ 13

5. Using a Web Brower ................................................................................................... 15

5.1 Connecting to the Camera ....................................................................................................... 15

5.2 Browsing Images from the Camera .......................................................................................... 15

6. Specifications ............................................................................................................. 16

3

General safety instructions

 Before switching on and operating the system, first read this safety advice and the operating

instructions.

 Keep the operating instructions in a safe place for later use.
 Installation, commissioning and maintenance of the system may only be carried out by authorised

individuals and in accordance with the installation instructions - ensuring that all applicable
standards and guidelines are followed.

 Protect the devices from water penetration and humidity, since these can cause lasting damage.
 Should moisture nevertheless enter the system, under no circumstance switch on the devices

under these conditions, rather send them for examination by an authorised specialist workshop.

 The system must never be used outside of the technical specifications, since this can destroy it.
 The device must be protected from excesses of heat, dust, humidity and vibration effects.
 When separating the system from the voltage supply, only ever use the plug to pull out the cable.

Never pull directly on the cable itself.

 Lay the connecting cables carefully and check that they are not mechanically stressed, kinked or

damaged and that no humidity can penetrate into them.

 In the event of a malfunction, please inform your supplier.
 Maintenance and repairs may only be carried out by authorised specialist personnel.
 The system must be isolated from the power supply before opening the housing.
 The device may only be opened by qualified service personnel. Unauthorised access invalidates

any warranty claim.

 Connection cables should always be exchanged through VIDEOR E. Hartig GmbH.
 Use only original spare parts and accessories from VIDEOR E. Hartig GmbH.
 The housing should only ever be cleaned using a mild domestic cleaning agent. Never use

solvents or petrol as these can permanently damage the surface.

 During installation, it is essential to ensure that the seals provided are correctly installed and that

they are not displaced during installation. Damaged seals must not be installed.

 The installer is responsible for the maintenance of the enclosure as per the technical data, e.g. by

sealing the cable outlets with silicone.

 Wire end ferrules should be used when shortening the flexible connection cables.
 The devices may only be operated in the temperature range indicated in the data sheet and within

the defined air humidity range.

Product-specific safety instructions:

Dome cameras

 Do not attempt to remove the camera module from the dome.
 The camera may never be pointed at the Sun with the aperture open (this will destroy the sensor).
 All of the openings in the housing intended for installation must be closed and/or sealed.

4

 It is unavoidable that during manufacture and to a certain extent during later use, humidity will be

present in the ambient air within the device's housing. In the event of large temperature
fluctuations, this humidity may condense inside the housing. To avoid this condensation inside the
very tightly sealed housing, the manufacturer has inserted silica gel bags in the housing.

 It is however a physical given, that these silica gel bags will reach saturation after a certain amount

of time. They should therefore be replaced with new silica gel sachets.

 The installer is responsible for the maintenance of the enclosure in accordance with the technical

data, e.g. through the use of all the accompanying seals and O-rings, through sealing of the cable
outlets with silicone and by laying the cables in such a way that no "water channel" results through
the cable.

 During installation, it is essential to ensure that the seals provided are correctly installed and that

they are not displaced during installation. Damaged seals must not be installed.

5

1. Product Features

 Full HD Image Quality and Details: A high-resolution megapixel sensor provides latency-free

1920x1080P Full HD resolution video to ensure that you won’t miss a thing.

 Day/Night Surveillance: Integrated infrared LED illuminates darkness and provides a clear picture

at night for a dependable, 24-hour surveillance solution.

 Direct fit to your existing HD-TVI DVR system: Just replacing your standard resolution analog

system with the HD-TVI compliant products through coaxial cable, you can seamlessly upgrade

your system to a HD analog system without additional cabling.

 360° and assorted viewing modes.

 Cost-effective Solution: Greater field of view at one time makes it a cost-effective replacement for

four separate 720P cameras.

 OSD Menu: Functional cable (in-line joystick) with easier adjustment.

6

2. The Overview

1. Camera Lens.

2. Light Sensor: Detects light levels and adjusts IR-LEDs accordingly.

3. Micro SD Card Slot: Insert a micro SD card for firmware upgrading.

4. Power LED.