Eneo RJT-1000SFP Quick Installation Manual

EN

Quick Installation Guide

RJ45- SFP Transceiver Modul,
1000Base-T, 0°~ +70°C

RJT-1000SFP

Please follow the following step

Installation step

1

1000BASE-T copper SFP transceiver

Feature

Up to 1.25Gb/s bi-directional data links ;

Hot-pluggable SFP footprint ;

Extended case temperature range (0°C to +70°C );

Fully metallic enclosure for low EMI;

Low power dissipation (1.05 W typical);

Compact RJ45 connector assembly;

Access to physical layer IC via 2-wire serial bus;

1000 BASE-T operation in host systems with SERDES interface.

10/100/1000Mbps compliant in host systems with SGMII interface

Board diagram

Please check the following items before installation. If any missing, please contact the dealer.

1pc

User

manual

1000BASE-T copper SFP transceiver

1 Plug l module into SFP socket;

2 Check if the installation is correct and device

is good, make sure all the connection is

reliable

and power up the system;

3) Make sure the optical communication is normal.

) the

)

The Copper Small Form Plug gable (SFP) transceivers is high performance, cost effective module
compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and
IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted­pair CAT 5 cable. The module supports1000 Mbps (or 10/100/1000Mbps) full duplex data-links with 5­level Pulse Amplitude Modulation (PAM) signals.