Eneo PXD-2080MIR D User Manual

Quick Installation Guide

1/3” Network Dome, Fixed, Day&Night, H.264, 1920x1080,

3D-DNR, Infrared, PoE, ONVIF

PXD-2080MIR D

MEGA-PIXEL NETWORK CAMERA

Safety Precaution

To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent electric shocks and risk of fire hazards, do NOT use other than specific power source.

CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the unit.

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Mains power quality should be that of a typical commercial environment. If the user of the model requires continued operation during power mains interruptions, it is recommended that the model be powered from an uninterruptible power supply (UPS) or a battery.

MEGA-PIXEL NETWORK CAMERA

Safety Precaution

NOTICE

The image used in this instruction manual are processed to help comprehension and may differ from actual video of the camera. Avoid installing areas where has shock or vibration which results in the problems.

Pay attention to safety when laying the connection cable and observe that the cable is not subjected to heavy loads, kinks or damage and no moisture can get in. Never open the device such as boards or lens. The warranty becomes void if repairs are undertaken by unauthorized persons. Maintenance and repair have to be carried out only by authorized service centers. Use only a mild detergent to clean the housing. The camera should never be operated beyond the technical specifications. This can lead to destruction. The camera should never be operated in water.

MEGA-PIXEL NETWORK CAMERA

Contents

p.03~04

p.05

p.06~07

p.07

p.08

p.09

Safety Precaution

Contents

Features

Composition

Dimensions

Part Names

p.10~13

Installation Instructions

p.14~29

Operating Instructions

p.30~31

Specifications

MEGA-PIXEL NETWORK CAMERA

Features

Key Features

• Full HD, 2Mega Pixel, NETWORK CAMERA, 1920x1080(30p/25p)

• ONVIF & PSIA Conformance

• Real time True WDR(Wide Dynamic Range) / 30fps

• Improved noise figure with the enhanced 3DNR

• Built-in f=2.8~10mm F1.4, Mega-pixel DC Auto Iris vari-focal lens

• Dual Filter Switcher

• Color D/N, optimized color mode for night

• Day & Night Simulation for easy focus adjustment

• Intelligent focusing status indicator on screen

• Various Zooming Technologies

- Smart Motion Zoom (Automatic zoom in/out when motion is detected)

- Pointing Zoom (which enables the programmable zooming at any area)

- Preset Zoom

- Flex Zoom

• Motion Detection, Privacy Mask, D-WDR, Defog, BLC/HLC, Title Set,

Sens-up, D-Zoom(~8x), Smart IR, AGC, Flickerless, H/V/HV Flip, Deblur

• Top performance at low light sensitivity (Sens-up On)

• H.264 / MJPEG dual streaming

• Slot for Micro SD memory card verified up to 32GB

• Two way Audio & Alarm input /output

• Menu Control via either Local Joystick or WEB

• OSD menu & CVBS Video output BNC for easy installation & maintenance.

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• PoE(IEEE Std. 802.3af) & Local dual power

• Operable up to -30ºC

• Built-in 30 IR-LEDs

• LED ON/OFF Control

• Zoom & Focus Adjustment on 3-Axis Gimbal

• Double side Hard Coated Polycarbonate Clear bubble dome

• Flush mount (option: Surface mount and various adaptors)

• Cooling Fan & Heating function

• IP67 / IK10 Protection

MEGA-PIXEL NETWORK CAMERA

Features

General Description

• With ICR mechanism,

- Enhances its sensitivity about 10x at night time

- Can accept the infrared light

• With PoE as well as 24VAC/12VDC dual power design,

- Offers the flexibility of installation

- Ensures the reliability

• With Intelligent Focus Indicator and FOCUS ADJUST menu,

- Offers easy adjustment of sharp focus

- Eliminates the mistake of the erratic focus adjustment

Composition

Network Dome Camera

Video Sub-out Cable (1pc)

Plastic Anchor:

6 x 30mm (3pcs)

Mounting Screw: 4 x 30mm (3pcs)

Operating Instruction

EMI Ferrite Core (1pc)

Mounting Template

Wiring Connector

(1pc)

Torque Wrench:

3mm (1pc)

Connector fixing Screw:

2.5 x 5mm (1pc)

Cable Signal Sticker

Focus adjust:

Driver (1pc)

MEGA-PIXEL NETWORK CAMERA

Dimensions

(unit : mm)

119

Ø140

Ø102 Ø140

3-Ø4.2

PCD Ø120

MEGA-PIXEL NETWORK CAMERA

Part Names

POWER CABLE

FLUSH MOUNT

FOCUS / ZOOM

LENS

SAFTY WIRE

3-AXIS GIMBAL

DOME COVER

BUBBLE DOME

[ BOTTOM VIEW ]

ETHERNET &POWER CABLE

OSD CONTROL JOY STICK

IP RESET

REAR VIEW

MICRO

SD-CARD SLOT

Micro SD Card

Coupler Board

Power Supply Connector

Ethernet Connector

MEGA-PIXEL NETWORK CAMERA

Installation Instructions

1. Locate the mounting template at the installation position and drill the ceiling or wall if needed.

2. Open the dome cover by loosening screws(4x12mm). Use the torque wrench supplied.

- Place the dome base unit on pre-drilled position and fix it through using mounting screws (4x30mm).

- Route the power cable to the connecting place.

3. Set the camera’s viewing angle and adjust zoom/focus of lens by using the focus driver.

4. Put the dome cover to the dome base unit and tighten the assembly screws.

Plastic Anchor

(6x30mm)

Torque Wrench

■ Optional Mounting Accessories

• Surface mount

• Pole mount adaptor

• Tilted junction mount

Mounting Screw

(4x30mm)

• Tilted mount

• Wall mount (Requires additional Surface mount)

MEGA-PIXEL NETWORK CAMERA

Installation Instructions

■ Option 1.

Installation with Flush mount / Tilted Junction mount

① Cables are unfixed on the Dome base. ② Disassemble coupler board for LAN cabling. ③ Connect the ethernet and power cables to their repective connections.

* Refer to the instruction guide for Tilted Junction mount .

■ Option 2.

Installation with Surface mount / Tilted mount

① Cables are unfixed on the Dome base. ② Organize the cables to fix the dome base as illustrated.

Fix the power supply connector with fixing screw.

③ Connect the ethernet cable to the coupler board. ④ Tie up the cables with the cable holders. ⑤ Check the final view for cable exit. ⑥ Connect the wiring connector to their repective connections.

* Refer to the signal assignment for wiring connection.

Connector

fixing screw

Cable holder-1

Coupler Board

Cable holder-2

CAUTION

• In the case of installation with Flush/ Surface/ Tilted mount, IP protection rating is not guaranteed.

• If power, Video, Network connectors are exposed to water or rain, separate protection shield is essential.

+ 25 hidden pages

Eneo PXD-2080MIR D User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual