Eneo PXB-2280Z10 D User Manual

Quick Installation Guide

1/3” Network Camera, WDR,
Day&Night, 1920x1080, 5.1-

EN

51mm, PoE, Infrared, 10x AF
Zoom

PXB-2280Z10 D

NETWORK AF-ZOOM CAMERA

Safety Precaution

To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.

CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.

The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.

Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.

03

NETWORK AF ZOOM CAMERA

Safety Precaution

NOTICE

The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
Avoid installing areas where has shock or vibration which results in the problems.

Pay attention to safety when laying the connection cable and observe that the
cable is not subjected to heavy loads, kinks or damage and no moisture can get
in.
Never open the device such as boards or lens.
The warranty becomes void if repairs are undertaken by unauthorized persons.
Maintenance and repair have to be carried out only by authorized service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical specifications.
This can lead to destruction.
The camera should never be operated in water.

04

NETWORK AF ZOOM CAMERA

Contents

p.03~04

Safety Precaution

p.05

Contents

p.06~07

Features

p.07

Composition

p.08

Dimensions

p.08

Part Names

p.09~11

Installation Instructions

p.12~33

Operating Instructions

p.34~35

Specifications

05

NETWORK AF ZOOM CAMERA

Features

Key Features

• Full HD, 2.4 Mega Pixel, NETWORK CAMERA, 1920x1080(30p/25p)

• ONVIF & PSIA Conformance

• True WDR (Wide Dynamic Range)

• Improved noise figure with 2D+3DNR

• Built-in f=5.1~51mm, F1.6~F1.8 Day & Night zoom lens
(Optical 10x Auto focus zoom / Digital 32x zoom)

• Intelligent Motion Detection, Privacy Mask

• Lens Refresh, E.Zoom, Flickerless, BLC, HLC, H/V/HV Mirror,

Defog, Freeze, Defect Detection, DSS(Sens-up), ACE(D-WDR),

Zoom Preset, Sharpness

• Home Position setting

• ID / TITLE / INITAIL MESSAGE / ZOOM RATIO DISPLAY

• Enhanced Sensitivity by DSS technology

• Improved DIS(Digital Image Stabilization) function

• H.264/MJPEG dual streaming with TI DM365/368 engine

• Full duplex 2 way Audio, Alarm IN/OUT

• Max 30fps live view @ 1920x1080p

• Slot for Standard SD memory card verified up to 32GB

• Zoom & Menu Control via either Local Joystick or WEB

• OSD menu & Video sub-out for easy installation & maintenance

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• PoE(IEEE Std. 802.3af), 24VAC/12VDC

• 4 High power LEDs

• Dual Window, Cooling Fan

• One touch 3-Axis locking bracket, Easy Installation Pad

• IP67 Protection

06

NETWORK AF ZOOM CAMERA

Features

General Description

This camera realizes the natural and crisp image as you see the scene in front of
you by adopting Auto Focus Full HD(1920x1080p) camera module.
Highly detailed pictures can be achieved and color reproducibility deserves attention.

• With ICR mechanism,

- Enhances its sensitivity about 10x at night time

- Can accepts the infrared light

• With 24VAC/12VDC dual power & PoE (Power Over Ethernet) design

- Offers the flexibility of installation

- Ensures the reliability

Compositon

Plastic Anchor:

6 x 30mm (4pcs)

Mounting Screw:
4 x 30mm (4pcs)

Camera

Operating

Instruction

Wiring Connector
(1pc)

Easy
Bracket

Mounting Template

Cable Signal
Sticker

Assembly Screw:

4 x 14mm (4pcs)

Video Sub-out:

Coupler for
RJ45 Cable (1pc)

07

Cable (1pc)

Torque Wrench:

3mm (1pc)

EMI Ferrite
Core (1pc)

NETWORK AF ZOOM CAMERA

Dimensions

(unit : mm)

80

100

86.40

75.90

87.30
108

Part Names

SUNSHIELD BOLT

SUNSHIELD

DUAL WINDOW

267

190

ETHERNET &
POWER CABLE

OSD Setup

CONTROL COVER

FRONT CASE

REAR CASE

LOCK/UNLOCK
SCREW

08

BRACKET

EASY
BRACKET

NETWORK AF ZOOM CAMERA

Installation Instructions

1. Locate the mounting template at the installation position and drill the ceiling or
wall if needed. ( *The easy bracket can not be installed on the ceiling)

2. Place the easy bracket on pre-drilled position and fix it through using mounting
screws. Skip this step when an easy bracket is not installed.

3. Route the power cable to the connecting place.
Hook up the camera bracket with the easy bracket as illustrated below.

4. Fix the camera bracket through using assembly screws.

5. Set the camera’s viewing angle.

6. Put the sunshield to the camera unit and tighten the sunshield-bolts.

Assembly Screw
: 4x14mm

Torque Wrench

Mounting Screw
: 4x30mm

2

4

1

3

REAR VIEW

Cable exit

CAUTION

• Extreme care should be taken NOT to scratch the window in front of lens.

• Care should be taken the cable is NOT to be damaged, kinked or exposed
in the hazardous area.

• Do not expose the camera directly to a strong light source such as the sun
or spot light.

09

NETWORK AF ZOOM CAMERA

Installation Instructions

Pan & Tilt adjustments

• Unlock the screw on the camera bracket through using the torque wrench supplied

• Set the camera’s viewing angle then lock the screw on the bracket.

1) Pan limit:
Pan is limited to +/- 90°.

2) Tilt limit:

Tilt is limited to 0°(2°) min ~ 90° max.
for wall(ceiling) installation respectively
with reference to the wall(ceiling) when
the inclination of camera module is 0°,
that is, the image is aligned horizontally.

90° 90°

90°

• on the wall

3) Inclination limit

(Horizontal image alignment):
Inclination limited to +/-90° max.

±90°

88°

• on the ceiling

Torque
wrench

■ Adjustment of viewing angle with a bracket

10

Lock/Unlock
Screw

NETWORK AF ZOOM CAMERA

Installation Instructions

Installation and commissioning Instructions

• Make sure the power is removed before the installation.

• After all connections are finished properly, follow the order for applying power.
a) Plug the network cable into RJ-45 Ethernet Port.
If PoE is the unique power, there will be no need to connect Power terminal.
b) When DC12V or AC24V Local power is necessary, first connect the low
voltage (DC12V or AC24V), then plug the AC adapter to AC outlets to avoid
an improper reset from power jitter and a damage from the surge voltage
when no load.

► When PoE and Local dual power are connected at the same time,
Local power has priority.

Power Supply Connections

Camera can work with either 24VAC or 12VDC, dual voltage power and PoE
(IEEE Std. 802.3af). Primary and secondary grounds are completely isolated
to avoid the possible ground-loop problems.

~24V/DC12V (RED)

~24V/GND (BLACK)

ALARM-IN (GREEN)

ALARM-OUT (BLUE)

GND (GRAY)

AUDIO-IN (BROWN)

GND (GRAY)

AUDIO-OUT (ORANGE)

■ Attach the Signal Assignment Sticker
in a visible spot for wiring reference.

■ EMI Ferrite Core Connection

50mm

50mm

11