Endress+Hauser CYH112 Specifications

TI00430C/07/EN/14.19 71453976 2019-01-07

Products Solutions Services

Technical Information

Flexdip CYH112

Holder for water and wastewater assemblies

Application

• Water and wastewater

• Plant construction

Your benefits

• Simple, cost-effective and easily extensible

• Holder can be installed on the floor, wall, coping stone or rail

• Can be adapted to ambient conditions

• Sensor installation on a cantilever arm with chain, fixed immersion pipe or free swinging installation

• Introduces sensors into the process safely and reliably

• Float version available for variable levels

• Holder largely adjustable in terms of height, extension and orientation

• Extensible and easy to retrofit

• Available as stainless steel or plastic version

• Captive threaded joints

• Easy to install and service

Function and system design

Flexdip CYH112

Measuring system

A complete measuring system consists of:

• CYH112 holder

• Assembly, e.g. CYA112

• Transmitter, e.g. Liquiline CM44

• Sensor, e.g. CUS71D

 1 Measuring system with CYH112 holder

1 Main pipe secured to floor 2 Transmitter 3 Protective cover 4 Transverse pipe with fastening elements 5 Hook-and-loop cable ties 6 Chain 7 CPA111 assembly

The holder system permits any combination of the components.

A0010865

The main pipe is suitable for mounting a transmitter with a weather protection cover. A junction box and a surge arrester can additionally be mounted on the weather protection cover. The holes for mounting must be drilled by the customer on site for this purpose.

The transverse pipe is used to position the sensors with regard to the distance from the wall and the immersion location. The assembly is used to adjust the immersion depth and to securely position the sensor in the medium. Hook-and-loop cable ties are preferably used for routing the sensor cable on the holder (see the Product structure). Cable routing for the power supply must be implemented by the customer onsite.

2 Endress+Hauser

Flexdip CYH112

The following assemblies can be used:

• Flexdip CYA112

• Dipfit W CLA111

• Dipfit W CPA111

• Existing assemblies that meet the requirements of the CYH112 holder as chain or fixedinstallation assemblies (weight, dimensions, lock)

Elements

The holder consists of the two basic elements - the main pipe and the transverse pipe - as well as the functional components (e.g. multifunctional clamp ring). This permits a wide variety of configurations to suit different installation requirements.

Main elements

Main pipe Ø 40 mm (1.6 in) , lengths: 500 mm (19.7 in), 1 000 mm (39.4 in), 1 800 mm (70.9 in)

Transverse pipe Ø 40 mm (1.6 in), lengths: 500 mm (19.7 in), 1 000 mm (39.4 in), 1 500 mm (59.1 in)

Chain Length: 5 m (16.4 ft)

The chain is supplied with 2 multifunctional clamp rings and 1 triangular carabiner (secures the chain). The open ends of the main pipe and transverse pipe are covered by caps. The main pipe remains open at the end.

Endress+Hauser 3

Functional components

Flexdip CYH112

A0010858

 2 Functional components for the CYH112 holder

1 Base 2 Cross clamp 3 Multifunctional clamp ring 4 Pendulum holder with pendulum adapter 5 Flange clamp 6 Rail mounting 7 Immersion pipe tray 8 Triangular carabiner (secures the chain) 9 Quick-action clamp

Base

The base is used to:

• Mount an upright post on the floor

• Mount a transverse pipe on a wall

Cross clamp

Two pipes can be joined at an angle of 90° with the cross clamp.

Multifunctional clamp ring

The multifunctional clamp ring has the following functions:

• For holders with a chain, the multifunctional clamp ring is used as the chain outlet on the basin side. On the stand side, the multifunctional clamp ring is used to secure the chain in conjunction with the triangular carabiner.

• In the case of the main pipe and transverse pipe, the working height on the main pipe can be adjusted with the multifunctional clamp ring.

• On main pipes and transverse pipes, the multifunctional clamp ring acts as an anti-slip lock.

Triangular carabiner

The chain is secured with the triangular carabiner.

4 Endress+Hauser

Flexdip CYH112

Quick-action clamp as retrofit kit

• Allows user-friendly operation of the cross clamp and flange clamp for the quick extension, retraction and rotation of the transverse pipe. The pipe can therefore be clamped without any tools.

• Facilitates sensor maintenance work with rail mounting.

Pendulum holder

• Holds the assembly while still permitting assembly movement.

• For rail mounting, the holder is reduced to a pendulum holder with a cross clamp. This permits pendulum movements in both axes.

 3 Pendulum movements in both axes

Flange clamp

Is used to mount a pipe. The pipe can be readjusted and repositioned after releasing the clamping elements.

A0010906

Endress+Hauser 5

Versions

Upright post for transmitter

Flexdip CYH112

A0011212

 4 Upright post for transmitter

1 Weather protection cover (not included in delivery) 2 Transmitter (not included in delivery) 3 Main pipe 1 800 mm (70.9 in) 4 Base for floor mounting

Order structure information: main pipe with floor mounting

Order code: CYH112-AB60A11A1

6 Endress+Hauser

Flexdip CYH112

Main pipe for floor mounting with fixed holder

A0011046

 5 Main pipe for floor mounting with fixed holder

1 Base for floor mounting 2 Main pipe 1 800 mm (70.9 in) 3 Multifunctional clamp ring 4 Cross clamp 5 Transverse pipe 1 000 mm (39.4 in) 6 Additional multifunctional clamp ring (not included in delivery) 7 CYA112 assembly (not included in delivery)

Order structure information: main pipe for floor mounting, transverse pipe

Order code: CYH112-AB60B50D1

The version is suitable for attaching a fixed assembly. Here, the multifunctional clamp ring (item 3) serves as a support for the transverse pipe. The additional multifunctional clamp ring (item 6) acts as an anti-slip lock.

Endress+Hauser 7

Main pipe for floor mounting with chain retainer

Flexdip CYH112

A0011045

 6 Main pipe for floor mounting with chain retainer

1 Base for floor mounting 2 Main pipe 1 800 mm (70.9 in) 3 Multifunctional clamp ring 4 Cross clamp 5 Transverse pipe 1 000 mm (39.4 in) 6 Triangular carabiner 7 Chain

Order structure information: main pipe for floor mounting, transverse pipe, chain

Order code: CYH112-AB60B50B1

The triangular carabiner secures the chain at the end of the pipe. The immersion depth of the assembly can be adjusted by adjusting the triangular carabiner.

8 Endress+Hauser

Flexdip CYH112

Wall mounting with transverse pipe and fixed holder

A0011054

 7 Wall mounting with transverse pipe and fixed holder

1 Base 2 Transverse pipe 500 mm (19.7 in) 3 Cross clamp 4 CYA112 assembly (not included in delivery)

Order structure information: no main pipe, transverse pipe with wall mounting

Order code: CYH112-AA11C30D1

The version is suitable for attaching a fixed assembly.

Endress+Hauser 9

Coping stone mounting with chain retainer

Flexdip CYH112

A0038623

 8 Coping stone mounting with chain retainer

1 Triangular carabiner 2 Multifunctional clamp ring 3 Flange clamp 4 Transverse pipe 1 000 mm (39.4 in) 5 Chain 6 CYA112 assembly (not included in delivery)

Order structure information: no main pipe, transverse pipe with coping stone mounting

Order code: CYH112-AA11D50B1

The version is suitable for an assembly suspended from a chain. The triangular carabiner secures the chain at the end of the pipe. The immersion depth of the assembly can be adjusted by adjusting the triangular carabiner.

10 Endress+Hauser

+ 22 hidden pages