Emerson PD6517 User Manual

PORTABLE CD, CD-R / RW PLAYER

with CASSETTE RECORDER

and AM / FM STEREO RADIO

OWNER’S MANUAL

PD6517

Visit our web site at www.emersonradio.com

PD6517_B010703.p65 7/1/2003, 15:1922

!

CAUTION

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrow­head symbol, within an equi­lateral triangle is intented to
alert the user to the presence
of uninsulated ‘dangerous voltage’
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.

WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK ) , N O U SER
SERVICEABLE PARTS INSIDE
REFER SERVICING TO
Q U A LI F IE D S E R V IC E
PERSONNEL.

The exclamation point within
an equilateral triangle is in­tended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompany­ing the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1.) Read these instructions.

2.) Keep these instructions.

3.) Heed all warnings.

4.) Follow all instructions.

5.) Do not use this apparatus near water.

6.) Clean only with dry cloth.

7.) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

8.) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

9.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

11.) Only use attachments / accessories specified by the manufacturer.

12.) Unplug this apparatus during lightning storms or when unused for long periods of time.

13.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.

14.) This appliance shall not be exposed to dripping or splashing water and no object filled with
liquids such as vases shall be placed on the apparatus.

15.) Do not overload wall outlet. Use only power source as indicated.

16.) Use replacement parts as specified by the manufacturer.

17.) The product may be mounted to a wall only if recommended by the manufacturer.

18.) Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.

1

PD6517_B010703.p65 7/1/2003, 15:231

BEFORE WE BEGIN

Thank you for purchasing this Emerson audio product. The Emerson brand is your
assurance of quality, performance and value.

Our engineers have included many useful and convenient features in this product.
Please be sure to read this Owner’s Manual completely to make sure you are
getting the maximum benefit from each feature.

This product was manufactured using the highest quality components and standards
of workmanship. It was tested by Emerson inspectors and found to be in perfect
working order before it left our factory. However, there is always the chance that
some problem may occur because of rough handling during shipment to the retail
store or to the final consumer.

If, after reading this Manual, you experience any problems with the operation of
this product, please refer to the instructions for obtaining service at the end of this
Manual. Emerson and Emerson retailers are committed to your satisfaction.

Once again, thanks for purchasing this Emerson audio product.
For future reference, record the serial number in the space provided.

Model No: PD6517
Serial No:

2

PD6517_B010703.p65 7/1/2003, 15:232

IMPORTANT NOTES

• Av oid installing this unit in places

exposed to di rect sunlight or close to
heat radiating appli ances such as
electric heaters, on top of other stereo
equipment that radiates too much heat,
places lacking ventilation or dusty areas,
places subject to constant vibration and/
or humid or moist areas.

• Do not attempt to clean this unit wi th

chemical solvents as this might damage

• Operate control s and switches as
described in the manual.

• Before turning ‘On’ the power, make
certain that power cord is properly
installed.

• Store your CDs, cassettes in a cool area
to avoid damage from heat.

• When moving the set, be sure to first
disconnect the power cord.

the finish. Use a clean dry cloth.

CLASS 1 LASER PRODUCT

CLASS 1 LASER PRODUCT

APPAREIL Á LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

This product contains a low power Laser Device.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that

may cause undesired operation.

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN AND INTERLOCKS

DEFEATED.

AVOID EXPOSURE TO BEAM

PD6517_B010703.p65 7/1/2003, 15:233

3

PREPARATION FOR USE

UNPACKING AND SET UP

·Carefully remove the unit from the carton and remove all packing materials from

the unit.

·Carefully remove any small strips of tape which may have been used to keep

the CD and Cassette doors closed during shipment.

·Open the CD compartment by pressing the OPEN button on top panel and lifting

upward. Inside the CD compartment you will see a white transit card which is
used to prevent the laser pick-up from moving during shipment. Carefully remove
this card and close the CD compartment door.

·Please save the carton and pac king materials in the event that your unit ever

needs to be returned for service. The original carton and packing materials are
the only way to protect the unit from damage during shipment.

POWER SOURCES

This unit is designed to operate on 8 pcs “C” batteries, not included, or on normal
120V 60Hz AC house current. Operating this unit from any other power source
may cause damage to the unit, and such damage is not covered by your warranty.

AC Operation

Connect the small end of the AC Power Cord to the AC socket on the back cabinet,
then insert the plug in any convenient household 120V 60Hz AC outlet.

4

PD6517_B010703.p65 7/1/2003, 15:234

NOTE:

AC Outlet

This unit has a polarized AC plug with one
wide blade and one narrow blade. This plug
will only fit into a matching polarized AC
outlet. This is a safety feature to reduce
the possibility of electric shock. If this plug
will not fit in your AC outlet, you probably

AC Plug

have an outdated non-polarized outlet. You
should have your outdated outlet changed by a qualified, licensed electrician. Do
not file the wide blade on the plug, or use an adapter to make the plug fit into your
outlet. This defeats the safety feature and could expose you to electric shock.

Battery Operation

1.) Remove the battery compartment door

on the back of the cabinet by pressing
down on the two tabs directly below the
“ ” marks.

2.)Insert 8 pcs “C” size batteries into the

battery compartment acc ording to the
polarity diagram engraved inside the
compartment. If the batteries are inserted
incorrectly the unit will not work.

3.) Replace the battery compartment door.

NOTE: In order to operate the unit on battery
power the AC cord must be disconnected
from the AC socket on the back cabinet.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Use only the size and type of batteries specified.

2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)

5

PD6517_B010703.p65 7/1/2003, 15:235

LOCATION OF CONTROLS AND INDICATORS

TOP VIEW

FRONT VIEW

PD6517_B010703.p65 7/1/2003, 15:236

6

1.) VOLUME Control.

2.) FUNCTION (TAPE-POWER OFF/RADIO/CD ) Selector Switch.

3.) Carrying Handle.

4.) CD door.

5.) AC Cord Socket (Back Cabinet).

6.) Battery Compartment (Back Cabinet).

7.) FM Telescopic Antenna.

8.) TUNING Control.

9.) BAND (FM STEREO/FM/AM) Selector Switch.

10.) FM STEREO Indicator.

11.) Dial Pointer.

12.) Cassette Control keys.
(PAUSE / STOP-EJECT / F.FWD D / REW / PLAY
/ RECORD )

13.) CD door OPEN Button.

14.) BEAT CUT Switch.

15.) PHONES (Stereo Headphone) Jack.

16.) CD Track LCD Display.

17.) CD REPEAT Button.

18.) Speakers.

19.) CD FWD.Skip Search Button.

20.) CD PLAY/PAUSE Button.

21.) Cassette door.

22.) CD STOP Button.

23.) CD REV.Skip Search Button.

24.) CD PROGRAM Button.

7

PD6517_B010703.p65 7/1/2003, 15:237

OPERATING INSTRUCTIONS

LISTENING TO THE RADIO

1.) Move the FUNCTION selector to the RADIO position.

2.) Move the BAND selector to the desired band, FM STEREO, FM or AM.

3.) Tune to your desired station with the TUNING control. If you have set the BAND

selector to FM STEREO and you tune to a FM Stereo station the FM STEREO
LED Indicator will light.

4.) Set the VOLUME control to the desired level.

5.) When you are finished listening move the FUNCTION selector back to the

TAPE (POWER OFF) position to shut the power ‘Off’ and extend the battery
life.

Antenna Information

AM

The AM antenna is inside the cabinet.
IF AM reception is unsatisfactory try
rotating the entire unit until you find
the position that provides the best
reception.

FM

Vary the direction of the FM antenna to
find the position that provides the best
reception.

NOTE: If you are listening to a weak FM Stereo station you can usually improve
the reception by moving the BAND selector from the FM STEREO position to the
FM position, however the sound will now be mono.

8

PD6517_B010703.p65 7/1/2003, 15:238

PLAYING COMPACT DISCS

Note: Although this portable CD player can read CD-R and CD-RW discs, in addition
to normal CDs, the playability of CD-R and CD-RW discs may be effected by the
type of software that was used to create the discs, as well as the quality and condition
of the blank media you are using. 100% playability cannot be guaranteed. This is
not an indication of a problem with the player.

NORMAL PLAYBACK

1.) Move the FUNCTION selector to the CD position.

2.) Open the CD door by pressing the OPEN button on the top panel. If you have

not already removed the white transit card from the CD player, please remove
it now.

3.) Place your CD on the center spindle with the printed

label side facing up. Close the CD door. The player
will read the Table of Contents and the display will
show the total number of tracks on the disc. If the
disc is damaged or up side down, display shows
“– –”

4.) Press the CD PLAY/PAUSE button to begin

playback on Track 1. The PLAY Indicator appears
in the display .

• To skip to higher or lower numbered tracks during playback press the FWD

or REV button repeatedly until the desired track number appears in the
display. Playback will begin on the selected track.

• To search rapidly forward or backward during playback to locate a specific

portion of a track, depress and hold the FWD or REV button. The player
will search rapidly forward or back ward as long as the buttons are depressed.
Normal speed playback will resume when the buttons are released.

• To Pause momentarily during playback press the

PLAY/PAUSE button again. The sound s tops
and the PLAY Indicator flashes, however the disc

continues to spin. To cancel Paus e and resume
normal playback press the PLAY/PAUSE button onc e more. Normal
playback resumes and the PLAY Indicator stops flashing.

5.) Adjust the VOLUME control as desired.

9

PD6517_B010703.p65 7/1/2003, 15:239

6.) To Stop playback at any time press the CD STOP button. The disc stops and

the display again shows the total number of tracks on the disc . After the last
track has played the disc stops automatically and the display again shows the
total number of tracks on the disc.

7.) Open the CD door, remove your disc, and close the CD door again.

8.) Move the FUNCTION selector to the TAPE (POWER OFF) position to shut the

power ‘Off’.

TO START PLAYBACK FROM A SPECIFIC TRACK

Insert your disc in the player, close the door, and wait until the display shows the
total tracks. Press either the or button until the desired track number appears
in the display, then press the PLAY/PAUSE button to begin playback on that
track.

REPEAT PLAYBACK

You can program the player to repeat either a single track or all tracks on the disc
continuously. The Repeat feature can be activated while the disc is playing or
while the disc is stopped.

One Track Repeat

Press the REPEAT button once. The REPEAT Indicator
appears. Select the track you wish to repeat with the

or buttons and then press the PLAY/PAUSE

button. The selected track will be repeated

continuously.
To cancel One Track Repeat press the STOP button once.

ALL Tracks Repeat

Press the REPEAT button twice. The REPEAT ALL
Indicator appears. Press the PLAY/PAUSE button
to begin playback. The entire disc will be repeated
continuously.

To cancel All Tracks Repeat press the STOP button once.

10

PD6517_B010703.p65 7/1/2003, 15:2310

PROGRAMMED PLAYBACK

You can program up to 19 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.

Note: The player cannot be programmed while a disc is playing. If a disc is playing
press the STOP button to stop playback before you begin the programming
steps below.

1.) Move the FUNCTION selector to CD, insert your disc in the player, close the

door, and wait until the total track number appears in the display.

2.) Press the CD PROGRAM button once. The

PROGRAM Indicator and program memory “00”
begin flashing in the display.

3.) Use the / buttons to select the first track to be

programmed. (Example: Track 08).

4.) When track number “08” flashes in the display, press

the PROGRAM button once again to enter the track
“08” in program memory number “01”. Track number
“08” disappears and “00” flashes again in the display,
indicating that you may now select a track to be
entered in program memory number “02”.

5.) Use the or buttons to select the next track to be programmed. When the

desired track number appears in the display press the PROGRAM button again
to enter that track in the program memory.

6.) Repeat Step 5 until you have entered up to 19 tracks

in the program memory. When the memory is full,
the “– –” flashes in the LCD display

7.) To begin programmed playbac k press the PLAY/

PAUSE button. The LCD display will show the
first programmed track and playback will begin on
that track. The PROGRAM Indicator flashes.

11

PD6517_B010703.p65 7/1/2003, 15:2311

After the last programmed trac k has played the player
stops but the programmed tracks remain in the memory.
To play the programmed tracks again, press the
PROGRAM button and then the PLAY/PAUSE button.

To cancel the programmed sequence from memory, press the STOP button at
programming mode, open the CD door, or move the FUNCTION selector to the
TAPE (POWER OFF) position.

Program Repeat Playback

You can use the Program and Repeat features together to continuously repeat a
programmed sequence of tracks. First, program the desired tracks according to
Steps 1 through 7 in previous page. When Programmed
Playback begins press the REPEAT button twice to
activate the All Tracks Repeat feature. The REPEAT ALL
Indicator appears in LCD display and all the tracks in
your programmed sequence will be repeated
continuously.

To cancel Programmed Repeat Playback press the STOP button until both the
PROGRAM and REPEAT Indicators go ‘Off’.

PD6517_B010703.p65 7/1/2003, 15:2312

12

PLAYING CASSETTE TAPES

1.) Open the cassette door by pressing the STOP / EJECT key..

2.) Place a pre-recorded cassette tape into the slots on the inside of the door with

the exposed tape facing up and the full reel on the right side.

Close cassette door.

3.) Move the FUNCTION selector to the TAPE position.

4.) Press the cassette PLAY key to begin playback.

5.) Set the VOLUME control as desired.

6.) To advance the tape rapidly press the F. FWD key. To stop the tape before

it ends press the STOP /EJECT key..

7.) To rewind the tape rapidly pres s the REW key. To stop the tape before it

ends press the STOP /EJECT key..

7.) When the tape ends the Automatic Stop System releases the PLAY key and

shuts off the tape motor. You may then open the cassette door, remove your
tape, turn it over and play the other side if desired.

8.) When you are finished listening stop the tape, open the door, remove the tape

and close the door. If you are playing a tape and then switch to the RADIO or
CD function be sure to press the STOP /EJECT key to disengage the

tape mechanism. This prevents excess wear and tear on the mechanism.

IMPORTANT:

Always press the STOP /EJECT key to shut off the tape motor before opening
the cassette door to remove your tape. The Automatic Stop System does not function
in the F. FWD and REW modes. When the tape ends in the F. FWD and

REW modes the motor continues to run. You must press the STOP /EJECT

key to shut off the motor before opening the door to remove your tape.

13

PD6517_B010703.p65 7/1/2003, 15:2313

MAKING A TAPE RECORDING

This model allows you to make tape recordings directly from the CD player, or the
radio.

• Refer to “PLAYING COMPACT DISCS” if necessary to operate the CD player.

• Refer to “LISTENING TO THE RADIO” if necessary to tune in the station you

wish to record from radio.

1.) Press the STOP /EJECT key to open the cassette door..

2.) Insert a good quality blank cassette tape into the slots on the cassette door with

the open end facing up and the full reel on the right. Use normal tape only. Do
not use tape identified as “CrO2” (Chrome) or “Metal” tape formulations. For
best results use tapes of 60 minutes (C-60) or less. Do not use 90 minute or
120 minute tapes as these thinner tapes are more likely to jam in the mechanism.

3.) Close the cassette door.

4.) When you are ready to start recording press the RECORD key. The PLAYY

key will also engage. The CD you are playing, or radio program you selected

will be recorded directly on to the tape.

5.) Press the PAUSE key during recording to stop the tape temporarily and

avoid recording unwanted material such as radio commercials.

6.) When you have finished recording press the STOP /EJECT key to stop

and remove the tape.

BEAT CUT SWITCH (On Left Side Cabinet)

Occasionally when recording from the AM radio a repetitive whistle or ‘beat’ sound
may be heard. If this occurs slide the BEAT CUT switch to its other position to
eliminate the unwanted sound.

Automatic Recording Volume Level Control

This unit has an Automatic Level Control (ALC) circuit which controls the recording
volume level and prevents overloaded and distorted recordings. The VOLUME
control has no effect on recording volume level. You may change the VOLUME
control setting during the recording or even reduce the volume level to “Minimum”.
This will not effect the level of the recording.

14

PD6517_B010703.p65 7/1/2003, 15:2314

STEREO HEADPHONE JACK

Connect a set of stereo headphones (not included) with a 3.5mm mini plug to the
PHONES jack (located at left side cabinet) for private listening without disturbing
others. Before putting on the headphones reduce the VOLUME control to a low
level, then put the headphones on and gradually increase the VOLUME control to a
comfortable listening level. The built in speakers are automatically disconnected
when headphones are connected to the headphone jack .

PD6517_B010703.p65 7/1/2003, 15:2315

15

CARE AND MAINTENANCE

COVER OPENING WITH TAPE

BREAK OUT TO PREVENT RECORDING

ABOUT CASSETTE TAPES

Whenever you record on a cassette any previously recorded material is erased as
the new material is recorded. To prevent you from accidentally erasing material
which you wish to save, blank cassettes are equipped with erase prevention tabs
for each s ide of the tape. If the erase prevention tab for side A is removed, you
cannot accidentally record on side A. The record key cannot be depressed if the
erase prevention tab on the cassette has been removed.

To prevent accidental erasing on side A of a cassette use a small screw driver or
similar tool to break off the erase prevention tab for s ide A. This prevents the
record key from locking.

A

TAB FOR SIDE A

If later you do wish to record on side A of the cassette, cover the tab opening with
a piece of cellophane tape. This will allow the record key to function again.

A

IN ORDER TO RECORD AGAIN.

16

PD6517_B010703.p65 7/1/2003, 15:2316

CASSETTE CARE

Two common causes of trouble experienced when using cassettes are:

1.) Tape jamming — Leading to uneven speed in playback, and

2.) Tape tangling — Where the tape wraps itself around vital parts of themechanism.

To reduce the likelihood of these problems occurring, the following precautions
should be observed:

• Check that there are no loose layers of tape visible

through the cassette center window (see Fig. 1).
Take up any loose layers, using a pencil or hexagonal
barrelled ballpoint pen, before inserting the cassette
into the machine (see Fig. 2).

• If the cassette feels “tight” while performing operation

shown (see Fig. 2), the tape may be jamming due to
“ridges” formed in the winding of the tape (visible
through the center window). These may be removed,
in most cases, by fast winding of the cassette from
one end to the other and back again.

• Use only well-known brands of tape. Avoid use of C-120 cassettes.

Furthermore, do not expose cassettes to direct sunlight, dust or oil, and do not touch
the tape surfaces.

HEAD CLEANING

The tape heads, pinch roller and capstan require periodic cleaning. This removes
particles of the metal oxide coating that wear off the tape and accumulate on these
parts and impair performance. Switch off the power, press the STOP/EJECT key
to open the cassette door, and press the PLAY key. Clean the tape heads, pinch
roller and capstan with a soft cloth or cotton pad dampened in isopropyl alcohol or
special tape head cleaner.

Pinch Roller Capstan Record/Play Erase Head

17

PD6517_B010703.p65 7/1/2003, 15:2117

Head

COMPACT DISC CARE

• To remove a disc from its storage case, press down on the center of the case

and lift the disc out, holding it carefully by the edges.

• Fingerprints and dust should be carefully wiped off the disc’s recorded surface

with a soft cloth.Unlike conventional records, compact discs have no grooves
to collect dust and microscopic debris, so gently wiping with a soft cloth should
remove most particles. Wipe in a straight line from the inside to the outside of
the disc. Small dust particles and light stains will have absolutely no effect on
reproduction quality.

• Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents

or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.

• Never write on or affix labels to the surface of compact discs.

CARE OF THE CABINET

If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax,
polish sprays, or abrasive cleaners on the cabinet.

CAUTION

Never allow any water or other liquids to get inside the unit while cleaning.

18

PD6517_B010703.p65 7/1/2003, 15:2318

TROUBLESHOOTING GUIDE

R

Should this unit exhibit a problem, check the following before seeking service.

Symptom Possible Cause Solution
Radio

Noise or sound Station not tuned properly for Retune the AM or FM
distorted on AM or FM AM or FM. broadcast station.
broadcasts. FM: Telescopic antenna is not Extend FM Telescopic

extended. antenna.
AM: The bar antenna is not Reposition the unit until

positioned correctly. best reception is obtained.
FM STEREO indicator The BAND selector is switched Switch the BAND selector
does not light. to FM position. to FM STEREO position.
AM or FM, no sound. FUNCTION switch is not set to Set FUNCTION switch to

RADIO. RADIO.

Volume at minimum. Increase Volume.

Compact Disc Player

CD Player will not play. FUNCTION switch is not set to Set FUNCTION switch to

CD. CD.

CD is not installed or installed Insert CD with Iabel side

incorrectly. up.
CD skips while playing. Disc is dirty or scratched. Wipe disc with cloth or use

another disc.

SERVICE

CALL TOLL FREE: 1-800-695-0098

FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE

FOR CUSTOMER SERVICE, PLEASE WRITE TO:

PD6517_B010703.p65 7/1/2003, 15:2319

TO FIND THE LOCATION AND PHONE
NUMBER OF YOUR NEAREST SERVICE
CENTER PERMITTED TO PERFORM
WARRANTY...

PLEASE CALL:

1-800-898-9020

Emerson Radio Corp.

Consumer Affairs Dept.

1901 Diplomat Drive,

Farmers Branch, TX 75234.

19

LIMITED WARRANTY

Emerson Radio Corp. warrants manufacturing defects in original material, including
original parts and workmanship, under normal use and conditions, for a period of
ninety (90) days from the date of original purchase in the U.S. With your dated
proof of purchase, we will provide repair service at no charge for labor and parts at
an authorized Depot Repair Facility, or replace the product in our discretion. For
repair or replacement, pack your unit in a padded box, enclose your check or
money order payable to Emerson Radio Corp. in the amount of $9.00 (not required
by California residents) to cover shipping and handling costs, and enclose a copy
of your proof of purchase. Send your unit to:

Emerson Radio Corp.
1901 Diplomat Drive.

Farmers Branch, TX 75234.

This warranty does not cover damage from negligence, misuse, abuse, accident,
failure to follow operating instructions, commercial use, rental, repairs by an
unauthorized facility, or products purchased, used, serviced or damaged outside
of the United States.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

AU898M

20

PD6517_B010703.p65 7/1/2003, 15:2320

EMERSON
Part No.: 16-2850B

301-01

EMERSON RADIO CORP.

Printed in China

PD6517_B010703.p65 7/1/2003, 15:2321