Emerson PACSystems RX3i CPL410 Datasheet

PACSystems RX3i CPL410

00813-0100-0102

PACSystems RX3i CPL410

Edge Controller featuring PACEdge Technology

Designed for Real-world Demands

Emerson’s PACSystems RX3i CPL410 edge controller is a

exible and high-performance control system ideal for a
range of applications, including water wastewater, metro,
industrial steam, automotive, chemical, oil and gas, discrete
manufacturing and modular machine designs. These diverse
applications require a compact controller that delivers the high
performance and exibility needed to run application-specic
control reliably.

The PACSystems RX3i CPL410 augments real-time deterministic
control with embedded PACEdge technology, delivering near
real-time advice through market analysis, eet and enterprise
data, or asset/process knowledge to optimize business
outcomes.

The CPL410 includes PACEdge with Linux and provides an open
platform for reliable, secure communication and analytics using
either cloud-based or edge-based apps. Controls can now be
programmed to dynamically inuence business outcomes,
generate new forms of revenue, and improve protability.

Reliable, High-Speed Performance

The PACSystems RX3i CPL410 runs on a real-time operating
system allowing it to deliver reliable and secure industrial
applications. It offers premier high-speed performance and
secure data handling for any multi- disciplined control system.
A generous working memory accommodates large programs
and extensive data storage. The quad-core high-speed
microprocessor executes programs faster than ever before.
It supports industry-standard PROFINET with I/O update rates
as fast as 1ms and up to 32 devices. With Ethernet interface
rates up to 1 Gbps, the CPL410 is built for rapid, reliable data
interchange.

Industrial Internet Enabled
with PACEdge Technology

Emerson edge controllers use realtime hypervisor technology
to run realtime deterministic control applications concurrently
with the PACEdge with Linux technology in a safe and
cooperative manner without impacting each other. PACEdge
technology is an Industrial Internet enabled coprocessor
platform that enables customers to not only connect to their
preferred cloud service, but also allows them to develop and run
data processing Linux-based applications next to the control
system to optimize their processes for better outcomes. Fleet
level analytics and access to realtime information enabled by
the CPL410 is critical to OEMs and machine builders looking to
get the most from their equipment eets, minimize travel and
maintenance costs, and quickly create and deploy intellectual
property to differentiate their machines.

Data Sheet

March 2021

PACSystems RX3i CPL410

Advanced Security

Industrial controls are constant targets of cyber threats. We
understand the risk involved in securing our customers’ most
important assets. We believe in defense-in-depth architectures
to secure assets from potential cyber threats.

With Achilles Level 2 Certication, the RX3i CPL410 has been
developed to be secure by design, incorporating technologies
such as Trusted Platform Modules, and secure boot. A
centralized conguration allows encrypted rmware updates to
be executed from a secure central location. A broad suite of
cyber-security technology and tools help prevent unauthorized
updates while built-in security communication protocols help
protect against man-in-the middle and denial of service attacks.

Flexible Redundancy
Tailored to Your Needs

March 2021

Key Benefits

Cloud Agnostic Platform. PACEdge with Linux

technology allows for secure connection to the
customer’s preferred cloud, leveraging data to analyze
and optimize business operations and improve
protability.

Co-processor Engine. A co-processor engine means
that existing Linux-based applications can be quickly
integrated with CPL410 to enable more intelligent
controls.

Reduced Risk. Built on the strong foundation of 40
years’ experience providing real-time, deterministic
controls for the world’s industrial assets, the CPL410
is secure by design, enabling secure operations and
connectivity from edge to cloud.

Building on our market leadership and decades of expertise in
mission critical backup power and critical cooling solutions,
PACSystems High Availability with PROFINET is a exible and
intelligent high-availability control system that helps ensure
maximum uptime while reducing total cost of ownership (TCO)
through easier conguration, operation, and maintenance.

Built on a scalable, synchronized, hotstandby redundancy
control platform, the PACSystems High Availability on CPL410
solutions provide uninterrupted control of your applications and
processes with total transparency.

Specifications

General

n Dimensions: 203.5mm x 56.7mm x 153.6mm (H x W x D)
n PACSystems: Operating System - VxWorks
n PACEdge: Operating System - Linux, Ubuntu 16.04

Temperature Range

n -40°C to 70°C

Power Requirements

n Input Power (Max) – 20 Watts
n Input Voltage (Min) – 18 Vdc
n Input Voltage (Max) – 30 Vdc
n Memory Backup Mechanism – Energy Pack: IC695ACC403

Firmware Upgrade

n CPU Firmware Upgrade Mechanism – Web/Ethernet Port

Reduced Lifecycle Cost. Advanced capabilities
simplify system architecture and reduce applied
engineering costs. Costs are further reduced with
embedded PROFINET, accommodating dedicated I/O
for application-specic needs

Maximum Uptime. Our market-leading PACSystems
high-availability solutions CPL410 offers a best-in­class high-availability control system for concurrent
maintainability and elimination of single points of
failure, maximizing uptime.

Display

n OLED Display

Program Portability

n RX3i PACSystems Applications using Family Type Conversion

Program Security

n Secure Boot
n Trusted Platform Module (TPM)

Program Storage

n PACSystems: RAM – 64 Mbytes
n PACSystems: Non-Volatile Flash – 64 Mbytes
n PACSystems: Energy Pack Capacitors, Life Expectancy – 5 years
n PACEdge: RAM – 2 GB
n PACEdge: Storage – 50 GB SSD

2 www.Emerson.com/PACSystems

March 2021

PACSystems RX3i CPL410

Auxiliary Storage

n PACEdge: 1x USB 3.0

Marine

n ABS, DNV-GL, BV, LR

Communications

n LAN1 – 10/100/1000 Mbps supported by 1x unswitched RJ-45
n LAN2 – 10/100/1000 Mbps supported by 2x switched RJ-45
n LAN3 – 10/100/1000 Mbps supported by 2x switched RJ-45
n Serial – 1x RS-232
n PACEdge with Linux – 10/100/1000 Mbps supported by 1xRJ-45
n USB – USB-A 3.0 x2 (Left port dedicated to PACEdge)

Redundancy Support

n Media Redundancy (MRP)
n PROFINET System Redundancy (PNSR)
n OPC UA Non-Transparent Server Redundancy

Ethernet Protocols

n SRTP
n Modbus TCP
n Ethernet Global Data (EGD)
n HART Passthrough
n PROFINET
n OPC-UA Server with secure access
n DNP3.0 Ethernet Outstation – L3

Serial Protocols

n ASCII Serial

Environmental

n IEC/EN 61131-2: 2007 (sections 5 & 6)
n Storage (unpowered)

– Dry Heat - IEC 60068-2-2: 1974 test Bb (70°C @ 16hrs)
– Cold Temp - IEC 60068-2-1: 2007 test Ab (-40°C @ 16hrs)

n Damp Heat

– IEC 60068-2-30: 2005 test Db (unpowered, 55°C, 2x)

n Marine Damp Heat

– IEC 60068-2-30: 2005 test Db (powered & unpowered, 55°C,
95%RH, 12hr x 2cycles)

n Sinusoidal Vibration

– IEC 60068-2-6: 1995 (test Fc)

n Shock

– IEC 60068-2-27: 1987 (test Ea)

EU

n CE Mark
n EMC Directive

– IEC/EN 61131-2: 2007(sections 8-10, Zone B)
– IEC/EN 61000-6-2: 2005 Ed 2.0
– IEC/EN 61000-6-4: 2006 Ed 2.0
– CISPR 11:2009 +A1: 2010 / EN 55011: 2009 +A1: 2010
– CISPR 22: 2010 / EN55022: 2010/AC:2011, (Class A)
– CISPR 24: 2010 / EN55024: 2010
– IEC/EN 61131-2: 2007 (sections 4 & 6)

n ATEX Directive

– Category 3 equipment - [II 3 G]
– EN 60079-0: 2012 A+11:2013
– EN 60079-7: 2015 [Type of Protection Ex ec]

n RoHS Directive
n REACH Regulation
n WEEE Directive

US

n FCC 47 CFR 15 Subpart B, Class A
n Hazardous Locations

– ISA 12.12.01: 2015, Class I Div. 2 Groups ABCD
– UL 60079-0 Ed 6.0 (2013), Class I, Zone 2 Gas Group ABCD
– UL 60079-15 Edition 4.0 (2013), [Ex nA]

Canada

n ICES-003:2016 (Class A)
n Hazardous Locations

– CSA C22.2 No. 213-15
– CAN/CSA-C22.2 NO. 60079-0:15, Class I, Zone 2
– CAN/CSA-C22.2 NO. 60079-15:12

n WEEE & Battery Regulations

PACEdge Default Software Components

n SQLLite database
n OPC-UA Client
n Python script interpreter
n Apache webserver

3www.Emerson.com/PACSystems

PACSystems RX3i CPL410

Ordering Information

Part Number Description

IC695CPL410 RX3i CPL410 Standalone Edge Controller

IC695CKL410 RX3i CPL410 Standalone Edge Controller, with Energy Pack

IC695CPL410CA RX3i CPL410 Standalone Edge Controller, Conformal Coated

IC695CPE400 RX3i CPE400 Standalone Edge Controller with PREDIX Connectivity

IC695CPK400 RX3i CPE400 Standalone Edge Controller with PREDIX Connectivity, with Energy Pack

IC695CPE400CA RX3i CPE400 Standalone Edge Controller with PREDIX Connectivity, Conformal Coated

March 2021

4 www.Emerson.com/PACSystems

PACSystems RX3i CPL410

00813-0100-0102

Data Sheet

March 2021

United State Office

Emerson Automation Solutions
Intelligent Platforms, LLC
2500 Austin Dr
Charlottesville, VA

China Office

Emerson Automation Solutions Intelligent
Platforms (Shanghai) Co., Ltd
No.1277, Xin Jin Qiao Rd, Pudong,
Shanghai, China, 201206

Singapore Office

Emerson Automation Solutions Intelligent
Platforms Asia Pacic Pte. Ltd.
1 Pandan Cres,
Singapore, 128461

Germany Office

Emerson Automation Solutions
ICC Intelligent Platforms GmbH
Memminger Straße 14
Augsburg, DE 86159

Brazil Office

Emerson Automation Solutions
Av. Hollingsworth, 325 – Iporanga
Sorocaba – SP, 18087-105

India Offices

Emerson Automation Solutions
Intelligent Platforms Pvt. Ltd.,
Building No.8, Ground Floor
Velankani Tech Park, No.43
Electronics City Phase I, Hosur Rd
Bangalore-560100

Americas Support – Technical and Commercial

Phone: [phone] or 1-434-214-8532 (if toll free 800 option is unavailable)
Email for Technical Support: [e-mail]
Email for Commercial Support: [e-mail]
Primary language of support: English

Europe, Middle East, & Africa Support – Technical and Commercial

Phone: [phone]
or [phone] (if toll free 800 option is unavailable or dialing from a mobile telephone)
Email for Technical Support: [e-mail]
Email for Commercial Support: [e-mail]
Primary languages of support: English, German, Italian, Spanish

Asia Support – Technical and Commercial

Phone: [phone] for Greater China
[phone] (All Other Countries)
Email for Technical Support: [e-mail]
Email for Commercial Support Asia: [e-mail]
Primary languages of support: Chinese, English

Support Website: www.emerson.com/iac-support

Home Website: www.emerson.com/PACSystems

©2021 Emerson. All rights reserved.

The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks
are property of their respective owners. The contents of this publication are presented for
information purposes only, and while effort has been made to ensure their accuracy, they are
not to be construed as warranties or guarantees, express or implied, regarding the products
or services describe herein or their use or applicability. All sales are governed by our terms
and conditions, which are available on request, We reserve the right to modify or improve

the designs or specications of our products an any time without notice.