Emerson NR303TTC User Manual

COMPLETE STEREO SYSTEM

with AM/FM STEREO RADIO,

CD and CASSETTE PLAYER,

and FULL SIZE STEREO PHONOGRAPH

OWNER S MANUAL

NR303TTC

Visit our web site at: www.emersonelectronics.ca

CAUTION

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES

CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE

OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence

within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK), NO USER

SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

1.)

2.)

Keep these instructions.

3.)

Heed all warnings.

4.)

Follow all instructions.

5.)

Do not use this apparatus near water.

6.)

Clean only with dry cloth.

7.)

Do not block any ventilation openings. Install in accordance with the manufacturer s instructions.

8.)

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.)

Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into you outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs,

10.) convenience receptacles, and point where they exit from the apparatus.

11.)

Only use attachments / accessories specified by the manufacturer.

12.)

Unplug this apparatus during lightning storms or when unused for long periods of time.

13.)

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14.)

This appliance shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed on the apparatus.

15.)

Do not overload wall outlet. Use only power source as indicated. Use replacement parts as specified by the manufacturer.

16.)

17.)

The product may be mounted to a wall only if recommended by the manufacturer.

18.)

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.

Thank you............ for purchasing this Emerson Heritage Series complete

home stereo system. Inside this beautiful real wood veneer cabinet you

will find a state of the art audio system that includes an AM/FM Stereo

Radio, a Compact Disc player, and a wide-range dynamic speakers. This

system has been designed to provide you with many years of enjoyment

and trouble-free operation with an absolute minimum of care and

maintenance.

Every component in this system was in perfect working order when it left

our factory. If you experience any problems with the set up or operation of

this system, PLEASE DO NOT RETURN IT TO THE RETAIL STORE.

Please call the SYNNEX Canada Limited Customer Service Hotline, toll-

free, at 1-800-663-5954. One of our representatives will attempt to resolve

the problem for you. If the problem cannot be resolved by phone you will

be instructed on how to proceed.

Please read all of the instructions in this manual to make sure you are

getting the maximum benefit out of the features included in this system.

And please save this manual for future reference. It includes your

warranty and important service information.

Once again, thank you for purchasing this Emerson Heritage Series

Complete Stereo System.

The serial number of your system is located on the back panel. Please

take a moment now to locate the serial number and write the number in the

space provided below. You may be asked to provided this number when

calling for product service.

Model Number: NR303TTC

Serial Number:

IMPORTANT NOTES

Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas,

Operate controls and switches as described in the manual.

Before turning On the power, make

certain that power cord is properly

installed. places subject to constant vibration and/ or humid or moist areas.

Store your Cds, cassettes in a cool

area to avoid damage from heat. Do not attempt to clean this unit with chemical solvents as this might damage the finish. Use a clean dry cloth.

When moving the set, be sure to first

disconnect the power cord.

CLASS 1 LASER PRODUCT

APPAREIL A LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

This product contains a low power Laser Device.

FCC INIFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may causes harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS

DEFEATED.

AVOID EXPOSURE TO BEAM

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)

This device may not cause harmful interference, and

(2)

This device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTES

IMPORTANT

Since digital circuitry may cause interference to other radio or television tuners nearby, switch this unit off when not in use or move it away from the affected radio/television tuner.

NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television operation (which can be determined by turning the equipment off), the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

PREPARATION FOR USE

UNPACKING AND SET UP

Carefully remove the unit from the display carton and remove all packing

material from the unit.

Unwind the AC power cord and extend it to its full length.

Unwind the FM Antenna wire and extend it to its full length.

Place the unit on a stable, level surface, convenient to an AC outlet, out of

direct sunlight, and away from sources of excess heat, dust, moisture, humidity,

or strong magnetic fields.

Connect the plug to your AC outlet.

Raise the lid to expose the phonograph. The phonograph has been secured

for shipment with a transit screw. Use a coin or screwdriver to turn the transit

screw clockwise. This will allow the turntable to float .

TRANSIT SCREW

Remove the opaque white plastic stylus cover from the phonograph stylus by

sliding it in the direction of the arrow.

STYLUS COVER

Discard the stylus cover.

Remove the twist-tie that was used to secure the tone arm during shipment.

Release the tone arm lock lever.

TONE ARM LOCK LEVER

Connect the plug to your AC outlet.

+ 14 hidden pages