Emerson CKS9031 User Manual

to the clock radio AUX IN jack with a cable with 2 ends 3.5mm stereo plug.

3.) “AUX IN” indicator will light on while AUX IN jack is plugged in, and the radio

will change to AUX function.

4.) Start to play iPod,MP3 or other audio player, and set the player volume to

maximum.

5.) Adjust the main unit volume to your desired level.

6.) Stop the main unit and your iPod, MP3 or other audio player when finished

listening, and disconnect the cable from the AUX IN jack.

Remark:

Once the AUX IN jack is plugged in,the alarm sound will be buzzer sound only

while the alarm function is activated.

Listening To The Radio

Digital Radio Frequency Display

1.) Set the Band AM/FM selector switch to the desired band, AM or FM.

2.) Set the VOLUME control to a low setting.

3.) Press the RADIO ON/OFF button to turn the radio ‘On’. The display changes

from time to an AM or FM radio frequency display.

4.) Turn the TUNING control to the leftside to select higher numbered

frequencies or to the right-side to select lower numbered frequencies.

Important: It is not necessary to tune to the exact frequency of your desired
station. Just rotate the TUNING control until you find the strongest signal and
the best reception, even if the frequency number on the display is higher or
lower than the actual station frequency.

5.) Adjust the VOLUME control to the desired setting.

6.) When you are finished listening, press the RADIO ON/OFF button to turn

the radio ‘Off’.

3.) Set the ALARM selector switch for one or both alarms to the “RADIO”

position The appropriate ALARM 1 and/or ALARM 2 indicators will light up

to confirm that the alarms are set.

“ ”

CR2032

AM

MON TUE WED THU FRI SAT SUN

Selecti ng The Alarm Mode

Your SmartSet®clock radio allows you to select from among three different alarm

operation modes for either alarm. The alarm modes are:

• Everyday – The alarm will turn on all 7 days.

• Weekdays only – The alarm will only turn on Monday through Friday

• Weekends only – The alarm will only turn on Saturday and Sunday.

;

To check the Alarm Mode setting forAlarm 1, depress the ALARM 1 setting button.

The displaywill show theAlarm 1 wake up time and the “Day Of The

will show you the alarm mode which is selected.

• If all 7

indicators are ‘On’, the Everyday mode

is selected.

• If only the M

onday through Friday indicators are

‘On’, the Weekdays only mode is selected.

• If only the S

aturday and Sunday indicators are

‘On’, the Weekends only mode is selected.

To change the Alarm Mode setting for Alarm 1, h

and p

ress the ALARM M ODE button until the Day indicators show the desired

old the ALARM 1 setting button

Week” indicators

AM

MON TUE WED THU FRI SAT SUN

AM

MON TUE WED THU FRI

AM

SAT SUN

mode setting, Weekdays only, Weekends only, or Everyday operation.

Release the ALARM MODE and ALARM 1 setting buttons and the display will

return to the correct time.

Follow the same pro cedu re to select the desire d Ala rm Mod e for Alarm 2 if

necessary.

Check ing The Wak e Up Times And Al ar m Mode

Whenever you want to check the wake up time or the alarm mode settings, simply

press either the ALARM 1 or ALARM 2 setting buttons. The display will change

from correct time to wake up time and the day indicators will show you the alarm

mode which is currently selected.

Release the ALARM 1 or ALARM 2 setting buttons to return to correct time.

9

ALARM

twice

ALARM

ALARM

10

ALARM 1 ALARM 2

ALARM

CR2032

128

Tuesday

13

“ ”

CR2032

FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE
PLEASE CALL:
1-800-898-9020 OR
1-800-695-0098 OR
E-MAIL TO: [e-mail]

14

Send your unit to:

Emerson Returns Facility

11500 Philadelphia ST

Mira Loma, CA 91752

ATTN:Returns Department

AU898N

2008

CKS9051/CKS9031

CKS9051/CKS9031-902-02

1511