Emerson CKD1100, CKD1100BL, Stereo Radio, CKD1100GN, CKD1100PK, CKD1100 User Manual

573.85 Kb
Loading...

Stereo Radio, CD-R/RW Player

with Dual Alarm Clock

OWNER’S MANUAL

CKD1100 (Silver Color)

CKD1100BL

CKD1100GN

CKD1100PK

(Blue Color)

(Green Color)

(Pink Color)

Visit our web site at www.emersonradio.com

CKD1100_052107.p65

30

 

21/5/2007, 10:44

 

 

 

 

 

 

 

 

 

 

CAUT I ON

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUT I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER ( O R B A C K ) , N O U S E R SERVICEABLE PARTS INSIDE R E F E R S E R V I C I N G T O Q U A L I F I E D S E R V I C E PERSONNEL.

!

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The Caution Marking maybe located at the bottom enclosure of the apparatus.

IMPORTANT SAFETY INSTRUCTIONS

1.) Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.

2.) Do not use this apparatus near water.

3.) Clean only with dry cloth.

4.) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

5.) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

6.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

7.) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

8.) Only use attachments / accessories specified by the manufacturer.

9.) Unplug this apparatus during lightning storms or when unused for long periods of time.

10.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

11.) This appliance shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed on the apparatus.

12.) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

13.) Do not overload wall outlet. Use only power source as indicated. 14.) Use replacement parts as specified by the manufacturer.

15.) The product may be mounted to a wall only if recommended by the manufacturer.

16.) Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.

1

CKD1100_052107.p65

1

 

21/5/2007, 10:44

 

 

 

 

 

 

 

 

 

 

Before We Begin

Thank you for purchasing this Emerson audio product. The Emerson brand is your assurance of quality, performance and value.

Our engineers have included many useful and convenient features in this product. Please be sure to read this Owner's Manual completely to make sure you are getting the maximum benefit from each feature.

This product was manufactured using the highest quality components and standards of workmanship. It was tested by Emerson inspectors and found to be in perfect working order before it left our factory. However, there is always the chance that some problem may occur because of rough handling during shipment to the retail store or to the final consumer.

If, after reading this Manual, you experience any problems with the operation of this product, please refer to the instructions for obtaining service at the end of this Manual. Emerson and Emerson retailers are committed to your satisfaction.

Once again, thanks for purchasing this Emerson audio product.

2

CKD1100_052107.p65

2

 

21/5/2007, 10:44

 

 

 

 

 

 

 

 

 

 

IMPORTANT NOTES

CLASS 1 LASER PRODUCT

CLASS 1 LASER PRODUCT

CAUTION

INVISIBLE LASER RADIATION

 

APPAREIL Á LASER DE CLASSE 1

WHEN OPEN AND INTERLOCKS

PRODUCTO LASER DE CLASE 1

DEFEATED.

AVOID EXPOSURE TO BEAM

 

This product contains a low power Laser Device.

Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas, places subject to constant vibration and/or humid or moist areas.

Operate controls and switches as described in the manual.

Before turning on the power, make certain that the AC power cord is properly installed.

When moving the set, be sure to first disconnect the AC power cord and remove cords connected to other equipment.

FCC Information

This equipment has been tested and found to comply with the limits for a class B digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

3

CKD1100_052107.p65

3

 

21/5/2007, 10:44

 

 

 

 

 

 

 

 

 

 

PREPARATION FOR USE

Unpacking And Set Up

Remove the unit from the carton, and remove all packing materials from the unit.

Save the carton and packing materials in case the unit ever needs to be returned for service. Using the original carton and packing materials is the only way to safely repack the unit for shipment.

Remove any descriptive labels or stickers from the top or front of the unit. Do not remove any labels from the back or bottom of the cabinet.

Remove any small strips of tape that may have been used to prevent the CD door from opening in transit.

Press the CD door in the area marked OPEN/CLOSE button to open the CD door and remove the ‘dummy CD’protection card from the CD player and discard it. Close the CD door.

Unwind the FM wire antenna on the back cabinet and extend it to its full length.

Unwind the AC power cord and extend it to its full length.

Place the unit on a stable, level surface such as a table, desk, shelf, etc within easy reach of an AC outlet, out of direct sunlight, and away from sources of excessive heat, dust, moisture or humidity.

4

CKD1100_052107.p65

4

 

21/5/2007, 10:44

 

 

 

 

 

 

 

 

 

 

Power Source

This system is designed to operate on 120V AC 60Hz house current only. Connecting this system to any other power source may cause damage to the system and such damage is not covered by your warranty.

NOTE: The system has polarized AC plug with one wide blade and one narrow blade. The plug will only fit into matching polarized AC outlets.

This is a safety feature to reduce the possibility of electric shock. If the plug will not fit in your AC outlet, you probably have an outdated non-polarized outlet. You should have your outdated outlet changed by a qualified, licensed electrician. Do not file the wide blade on the plug, or use an adapter to make the plug fit into your outlet. This defeats the safety feature and could expose you to electric shock.

AC Outlet

AC Plug

Protect Your Furniture

This model is equipped with non-skid rubber ‘feet’to prevent the product from moving when you operate the controls. These ‘feet’are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber ‘feet’before you place the product on fine wooden furniture.

5

CKD1100_052107.p65

5

 

21/5/2007, 10:44

 

 

 

 

 

 

 

 

 

 

Battery Back Up System

This unit uses a single 9-Volt battery (not included) to maintain the time and alarm settings in the event that it is accidentally unplugged, or you experience a temporary power failure. We recommend that you install a well-known brand of Alkaline battery for longest life and best performance. To keep the battery back up system operational you should install a new battery every 6 to 9 months.

To install the back up battery, turn the unit upside down.

1.) Press on the small tab to remove the battery door.

2.) Connect the battery to the battery terminal.

3.) Pus h the battery bac k into the compartment and replace the battery door.

If the power is interrupted the clock display will go off but the battery will maintain the clock and alarm time settings. When power is restored the time display will be correct and your alarm setting will also be maintained.

If you notice that the time display is completely wrong you probably experienced a power failure with a weak or exhausted battery in the compartment. Reset the clock and replace the battery as soon as possible.

6

CKD1100_052107.p65

6

 

21/5/2007, 10:44

 

 

 

 

 

 

 

 

 

 

LOCATION OF CONTROLS AND INDICATORS

Front Panel

 

6

7

8

9

5

 

 

 

10

4

 

 

 

 

3

 

 

 

11

2

 

 

 

 

1

 

 

 

12

 

 

 

 

15

14

 

13

 

Top Panel

25

24

23

23

26

22

 

21

27

 

20

28

19

 

18

29

 

17

30

 

16

 

 

31

7

CKD1100_052107.p65

7

 

21/5/2007, 10:44

 

 

 

 

 

 

 

 

 

 

1.) AM/PROG. (AM Radio ‘On’ or CD Program Track) Indicator. 2.) AL2 (Alarm 2) ‘On’ Indicator.

3.) VOLUME Control.

4.) AL1 (Alarm 1) ‘On’ Indicator.

5.) PM Indicator.

6.) TIME-DN/F.REV Button.

7.) STOP Button.

8.) CD PLAY/PAUSE Button.

9.) TIME-UP/F.FWD Button.

10.) SLEEP Indicator.

11.) TUNING Control.

12.) FM Radio ‘On’ Indicator.

13.) LED Display.

14.) AUX Jack.

15.) PHONES Jack.

16.) ALARM 1 Button.

17.) RADIO/BAND Button.

18.) CLK.ADJ/PROG. Button.

19.) DIMMER (HIGH/LOW) Selector Switch.

20.) ALARM OFF/POWER Button.

21.) POWER ‘On’LED Indicator.

22.) Back Up Battery Compartment (At bottom cabinet)

23.) Speakers.

24.) AC Power Cord.

25.) FM W ire Antenna.

26.) CD compartment.

27.) CD Door OPEN/CLOSE Position.

28.) SNOOZE Button.

29.) SLEEP Button.

30.) ALARM SET/DISPLAY Button.

31.) ALARM 2 Button.

8

CKD1100_052107.p65

8

 

21/5/2007, 10:44

 

 

 

 

 

 

 

 

 

 

+ 21 hidden pages