Emerson Branson Specifications

Ultrasonic Vapor Degreasers

Overview

The Branson B-Series Ultrasonic Vapor Degreasers are

a series of environmentally sound, cost effective preci-

sion degreasers. Branson, well known for ultrasonics,

is also the global leader in solvent cleaning technology.

The B-Series integrates over 60 years of of degreasing

experience with the demanding needs of a changing

marketplace to offer you a functional solvent solution

to your cleaning needs. They incorporate all of the

important environmental and safety features you need,

including onboard compressors for both primary and

sub-zero cooling. All controls are clustered on compact,

front-mounted, digital control panels. The B-Series is

ideal for use with most commercially-available vapor

degreasing solvents.

B-Series

Environmental Features

The B-Series is designed to comply with EPA environ-

mental regulations on solvent emissions, an important

environmental and economic consideration. Some

of these features also facilitate OSHA compliance.

The units include, as standard, a number of engineered

improvements designed specifically to minimize solvent

losses. The following list details some of these more

important features:

• Freeboard ratio of 100% to minimize diffusion losses

due to drafts

• Sub-zero freeboard condenser to provide a cold

barrier minimizing emissions

• Primary refrigerated condensing coil to efficiently

condense the bulk of the solvent vapors prior to

reaching the sub-zero condenser

• Captured sliding cover to eliminate drafts and help

seal the unit during periods of inactivity

• Internal water separator keeps all solvent within

the unit at all times

• Recirculating pump and filter to remove particulate

and extend solvent life

Safety Features

In addition to the benefits associated with keeping

solvent away from the operator, the B-Series has many

other features which contribute to safety and reliability.

Key among these are:

• Low voltage controls for operator safety

• High-vapor level sensor to prevent solvent boil off

• Low solvent sensor to prevent heater damage

• Boil Sump over temperature alarm

Options

• Automated Hoist Systems

• Stainless Steel Parts Baskets

• Rotating Parts Baskets

• Desiccant Dryer for Azeotropic Solvents

• Power-Operated Sliding Cover

• Upper Enclosure System

• Solvents Spraying

• High-Frequency Ultrasonics

Specifications

B-Series

The Branson Advantage

Top View

Front View

Side View

The system shown is the B950R with the optional
dual-axis lift. While there are slight differences
between each model, this drawing is representative
of the basic system layout.

BRANSON

FREEBOARD

VAPOR AREA

ULTRASONIC
SUMP

BOIL
SUMP

MODEL B352R MODEL B452R MODEL B950R MODEL B1950R MODEL B3550R

Working Dimensions 8" X 10" X 6"D 10" X 12" X 8"D 12" X 16" X 12"D 16" X 20" X 14.5"D 20" X 24" X 17"D

Boil Sump Heat 1200W strip heat 2000 W immersion heat 4000 W immersion heat 8000 W immersion heat 14000 W immersion heat

Ultrasonic Heat NA 400 W 1000 W 1500 W 2000 W

Ultrasonics * 40 kHz 40 kHz 40 kHz 40 kHz 40 kHz

Distillation Rate ** 4 gph 7 gph 14 gph 28 gph 49 gph

Recirculation 1 gpm 1 gpm 2 gpm 4 gpm 6 gpm

Load Capacity ** 100 lbs. steel/hour 200 lbs. steel/hour 400 lbs. steel/hour 800 lbs. steel/hour 1400 lbs. steel/hour

Vapor Zone 23.7" X 13" X 7"D 28.7" X 15" X 8.5"D 32.7" X 19" X 12"D 40.7" X 23" X 14.5"D 48.7" X 27" X 17"D

Solvent Capacity 5.1 gallons 9.2 gallons 26 gallons 50 gallons 82 gallons

Overall 40" X 31" X 47"H 55" X 28.5" X 46"H 65" X 32.5" X 49"H 88" X 36.5" X 59"H 110" X 40.5" X 68"H

Input Power 208 or 230V, 1Ph, 20A 208 or 230V, 3Ph, 27A 208 or 230V, 3Ph, 39A 208 or 230V, 3Ph, 66A*** 208 or 230V, 3Ph, 90A***

Shipping Weight 500 lbs. with pallet 550 lbs. with pallet 750 lbs. with pallet 950 lbs. with pallet 1200 lbs. with pallet

*Higher frequencies available upon request. **Based on HFE and HFC solvents. ***460V 3P available.

Americas

Branson Ultrasonics Corp.
41 Eagle Road
Danbury, CT 06810, USA
T: 203-796-0400
F: 203-796-0450
www.bransonultrasonics.com

All specifications subject to change without notice. All dimensions are nominal. All units are CE compliant and
comply with FCC rules and regulations governing radio frequency interference. Note: All sales shall be subject to
the Supplier’s terms and conditions of sale as described in Branson’s quotations and sales contracts.

Europe

Branson Ultraschall
Niederlassung der Emerson
Technologies GmbH & Co. OHG
Waldstrasse 53-55
63128 Dietzenbach, Germany
T: [phone]
F: [phone]
www.branson.eu

Asia

Branson Ultrasonics (Shanghai) Co., Ltd.
758 Rong Le Dong Road
Song Jiang, Shanghai, PRC, 201613
T: 86-21-3781-0588
F: 86-21-5774-5100
www.branson.com.cn

© Branson Ultrasonics Corporation 2014.

The Emerson logo is a trademark and service mark

of Emerson Electric Co. PJ-001X-14