Emerson BMS Brochures and Data Sheets
Chloride BMS
Battery Monitoring System
Industrial Power for
Business-Critical Continuity
™
Chloride BMS is a battery monitoring
tool to effectively manage stand-by
battery banks, thereby ensuring the
reliability of back-up power systems. It
helps minimizing the risk of failure to
critical systems.
BMS enables maintenance teams to easily
monitor battery health status and resolve
potential issues before they become
costly problems.
Benefi ts
Reduced maintenance costs through
preventive maintenance instead of emergency replacement
Maximized battery life through smart
diagnostics, regular data analysis and ontime remedial action
Increased safety on site as back-up power
remains available when most needed and
less human presence is required in battery
room
Key Features
24/7 alarm notifi cation
Event Log of all activities affecting the
battery bank
Remote access – via TCP/IP or Modbus
Automatic capture of data and report
generation
Individual battery impedance measure
Individual and ambient battery temperature
measures
Individual and battery string voltage and
current measures
Compatible with Ni-Cd and Lead batteries,
open or gas-recombination types
Optical isolation to increase safety
Wide choice of confi gurations to meet the
most complex architectures
The power to predict battery health
Chloride BMS battery monitoring system is the ultimate detection tool to
predict and detect stand-by battery bank issues.
Routine testing is essential to evaluate performance of any battery. The
Chloride BMS continuous monitoring tool allows preventive detection of any
potential anomaly: all the relevant parameters, such as voltages, current,
impedance and temperature are constantly measured to allow a secure
diagnostic of the battery health status.
A wide scope of communication features such as emailing, SMS and serial link
allows the maintenance manager to get the right information early enough
to prevent power failures.
By using the Link dedicated software, the user can access to real time battery
status and measurements, view alarm and battery history and check alarm
status of all connected cells. It is also possible to initiate and manage battery
dedicated reports.
Applications
Chloride BMS suits all applications where safety
and reliance on a battery bank is highly critical:
Oil and Gas, Petrochemical and Chemical
industries
Power generation plants
Power Transmission and Distribution
Continuous process industries
Chloride BMS
Battery Monitoring System
Chloride BMS Box - technical data
Purpose
The Chloride BMS box is a wall-mounted box to interconnect the monitored battery with the monitoring software tool
and which allows remote indication via serial link and volt-free contacts.
General Data
Power supply voltage range 48VDC - 400VDC (from battery)
Dimensions Height: 560mm
Ingress protection IP42 according to IEC60529
Frame colour Grey RAL 7032
Cable entry Bottom
Operating temperature 0°C to 50°C
Storage temperature 0°C to 70°C
Communication
Relay outputs (volt-free contacts) -Voltage fault
Com port 1 Ethernet
Com port 2 RS 485 interface: Modbus ASCII or RTU protocol
Sentinel data acquisition module - technical data
Purpose
The Sentinel module allows to measure string values and makes data acquisition from the connected m-Senzors.
Battery string measured values
String voltage range 2V - 600V
String current:
•Measurement Range 0A - 2000A
•Number of string current measures up to 5 (scaleable to 16)
String ambient temperature:
•Measurement range 0°C to 50°C
•Number of measures up to 5. Only 1 sensor per battery room if several strings in
Acquisition of battery monoblock measured values
Number of monoblocks
Voltage (depending on battery type and m -Senzor type) from 1V to 12V
Impedance
Temperature
General Data
Power supply voltage range 48 VDC - 110 VDC
Dimensions Height: 270mm (1U)
Communication
LEDs 12 status LEDs on front of the module
Service port RS232 for confi guration / factor y setting)
Digital inputs 4
(1)
(2)
Purpose
m-Senzor is the measurement module which can measure individual monoblock voltage, impedance and temperature.
Application Lead Acid or Nickel-Cadmium
Measurements
Input confi guration Single or Dual monoblocks sensors
Nominal voltage 1 V 2 V 4 V 6 V 8V 12 V
Voltage measure 0.8V - 1.9V 1.6V - 2.6V 3.2V - 5.2V 4.8V - 7.8V 6.4V - 10.4V 9.6V - 15.6V
Impedance measure 0.15 - 5 mΩ 0.15 - 5 mΩ 0.15 - 5 mΩ 0.5 - 20 mΩ 0.5 - 20 mΩ 1 - 40 mΩ
Temperature measure -10°C to +70°C (measure taken on negative post of battery)
General Data
Power supply powered by the monoblocks being monitored
Interface to Sentinel BBUS (150m max cable length per BBUS port)
Purpose
Link is the battery management software which allows easy interfacing and understanding of battery status and alarms
Recommended PC system requirements
Processor Intel E5400 DUAL CORE or better
Operating system Windows XP Professional or greater
RAM 2 GB
(3)
(2)
A monoblock represents one or more battery cells in a container.
Available as option.
m-Senzor module technical data
Link Battery Management Software
PC is not part of our scope of supply.
(1)
(depending on block voltage and m-Senzor) from 0.15 to 40 mΩ - For Lead Acid batteries ONLY
(2)
Vented or Recombination
(3)
Width: 585mm
Depth: 400mm
-Temperature fault
-Impedance fault
-System fault
the same battery room
up to 160 (scaleable to 1280)
from -10°C to +70°C
Width: 430mm
Depth: 45mm
Chloride BMS box
Sentinel module
Link software screenshot
Industrial Power for
Business-Critical Continuity
m-Senzor module
™
While every precaution has been taken to ensure the accuracy and completeness of this literature, Emerson Network power assumes no responsability and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
Emerson Network Power.
The global leader in enabling
Business-Critical Continuity™.
AC Power
Connectivity
DC Power
Embedded Computing
Emerson Network Power IS S.A.S
30 avenue Montgolfi er - BP90 - 69684 Chassieu Cedex - France
T: +33 (0)4 78 40 13 56 F: +33(0)4 78 90 58 90
Industrial.sales.Chloride@Emerson.com
EmersonNetworkPower.com
Embedded Power
Industrial Power
Infrastructure Management & Monitoring
Outside Plant
Emerson Electric Co. or one of its affi liated companies.
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Emerson, Business-Critical Continuity and
Emerson Network Power are trademarks of
©2012 Emerson Electric Co.
BMS-DSUK-Rev0-12/2012
Loading...