Outside Plant for
Business-Critical Continuity™
3 and 6-Pair Terminal Blocks
Key Features
•Variety of binding post configurations provide flexibility to meet most termination requirements
•Solid injection-molded plastic material provides a low moisture absorption rate
•Discharge washer overvoltage protection is available for protection on a range of 5000 volts DC and approximately 10KV or less on a surge front of 5KV/ µsec
•Raised terminal posts offer high surface insulation
OSPDS-061900 / 1109
Description
The 3 and 6-pair terminal blocks provide drop wire terminal points in ready-access and pedestal closures. They are available with or without leads for tying into the cable. These blocks are also available with discharge washer overvoltage protection. The stainless steel washers provide protection in a range of 5000 volts DC and approximately 10KV or less on a surge front of 5KV/msec.
The blocks are made of a solid injection-molded Red plastic material that has a low moisture absorption rate. The terminal posts are brass and are raised to provide high surface insulation.
On those terminals provided with double leads, the wires are 24-gauge color-coded PVC, 30-in. (762.7mm) long. Single-lead blocks have 20-1/2-in. (520mm) leads.
Terminal blocks without leads are available with a variety of binding post configurations.
Application
The Emerson Network Power 3 and 6-pair terminal blocks provide protected or unprotected drop-wire terminal points in ready-access and pedestal closures.
145 |
145P |
1645 |
16645P |
1
Loading...