Elvid OCM-7B-4KV2 User Manual

FIELDVISION

OCM-7B-4KV2

7˝ 4K IPS Monitor

USER
MANUAL

2

THANK YOU FOR CHOOSING ELVID.

The Elvid FieldVision 4KV2 is a lightweight 7-inch on-camera monitor

that’s capable of displaying signals up to UHD 4K (3840 × 2160) and

DCI 4K (4069 × 2160). The LCD panel’s native resolution of 1920 × 1200

provides a sharp image and facilitates precise color rendering. It offers

an aspect ratio of 16:10 (native) that you can set to your preferred size

along with four zoom presets. In addition, pixel-to-pixel mode gives you

the actual quality of 4K resolution in order to see the ne details of your

image. The FieldVision 4KV2 also accepts composite video and two-

channel audio with an A/V breakout cable (not included).

The on-screen menu makes it easy to adjust your image, and it offers

adjustments for brightness, contrast, hue, sharpness, color temperature,

and saturation. There are also broadcast-specic features like safety

frame markers and multiple display formats.

The FieldVision 4KV2 is equipped with advanced tools like Check Field to

help calibrate the monitor, a Focus Assist setting to ne-tune your focus,

and Camera mode to scale the incoming video signal when shooting on a

DSLR. Onboard programmable function buttons provide quick shortcuts

to the tools you want at your ngertips. There’s also an integrated

speaker and a 3.5 mm stereo headphone output for live audio monitoring.

A removable sunshade is included to minimize glare when shooting

outdoors.

3

3

PRECAUTIONS

• Exposure to high sound levels
can cause permanent hearing
loss. Avoid listening at high
volumes for extended periods of
time.

• Keep this product away from

water and any ammable gases

or liquids.

• Do not expose this product to
humidity or extreme heat or
cold.

• Make sure this product is
powered off when plugging it
into a power source.

• Use only the correct,
recommended voltage.

• Do not attempt to disassemble
or repair this product.

• Do not place or store the
FieldVision 4KV2 facedown,
since this can damage the
screen.

4

• Handle this product with care.
Avoid any impacts to this
product.

• Do not block the vents in this
product.

• Disconnect this product from its
power source before storage and
during electrical storms.

• Do not use chemical solutions to
clean this product. Clean it with
only a soft, dry cloth.

• Keep this product away from
children.

• Make sure that this product
is intact and that there are no
missing parts.

• To avoid damage to this product,
be careful not to overtighten or
improperly thread any of the

threaded ttings.

• All images are for illustrative
purposes only.

TABLE OF

CONTENTS

Overview ..............................................................................................6-7

Product Contents .................................................................................. 8

Powering Options .............................................................................9-10

Using the OCM-7B-4KV2 ...............................................................11-12

The HDMI Lock .....................................................................................13

The Sunshade ........................................................................................14

Front Panel Buttons ............................................................................15

Function Buttons .................................................................................16

The Menu ...............................................................................................17

Color Menu ...................................................................................... 18-19

On-screen Display (OSD) Menu .................................................20-21

Function Menu .............................................................................22-24

Function Button Shortcut Menu .....................................................25

Specications .................................................................................26-27

Troubleshooting ............................................................................ 28-29

FCC Statement .....................................................................................30

Warranty ................................................................................................31

5

OVERVIEW

FIELDVISIONHR4K

MODE MENU F3 F4/F2/F1

6

Screen

Mode button

Left Nav/Vol -

Right Nav/Vol +

Down Nav/F1 button

Menu button

Status LED

Power button

F4 button

F3 button

Up Nav/F2 button

Headphone jack
OSD controller port
USB port

USBOSDAVHDMIDC 12V

Sunshade slots

HDMI lock mount
DC power input
HDMI input
AV input

Speaker
Battery plate
1/4″ -20 threaded socket

7

PRODUCT

CONTENTS

· 7 in. On-Camera Monitor

· Shoe-mount ball head

· Sunshade mounting frame

· Sunshade

Note: For additional battery plates and adapters compatible with
other popular brands, visit elvidcinema.com.

8

· Mini HDMI to HDMI cable

· HDMI lock collar

· Sony L-Series battery mount

POWERING

OPTIONS

There are two ways to power the FieldVision 4KV2: AC power
or battery (not included).

CAMERA BATTERY

The FieldVision’s built-in battery mounting plate accommodates
a Sony L-Series–type battery.

To install a compatible battery,
follow these steps:

1. Place a compatible battery in
the battery plate. Make sure
the battery’s bottom contacts
are aligned with the contacts
in the battery plate.

2. Slide the battery forward
until it locks into place. The
indicator LED will glow red
when the power source is
connected.

9

To turn on the FieldVision 4KV2, press the power button on
the front panel of the monitor. The FieldVision 4KV2 will
turn on and enter standby mode (yellow indicator LED).

A battery monitor appears at the top of the screen and
displays the remaining battery charge.

Note: The power indicator glows red in standby mode while
connected to a power source.

AC POWER

To run the FieldVision 4KV2 with AC power, use a 12 V DC
adapter (not included) to connect the FieldVision 4KV2’s
DC power input to your AC power source.

To turn on the FieldVision 4KV2, press the power button.
The FieldVision 4KV2 will turn on and enter ready mode,
and the power indicator LED will turn green.

10