System setup18
Troubleshooting21
DVD characteristics22
DVD, special functions23
Functions supported by DVDs23
Technical data24
Rights25
Own notes26
V. Mode14
OSD14
Subtitle14
Step14
Time14
Repeat14
A-B repeat14
02
SAFETY PRECAUTIONS
A triangle with a lightning symbol draws the user's attention
to “dangerous voltage” without insulation in the housing
which may be high enough to entail a risk of electric shock.
A triangle with an exclamation mark draws the user's
attention to important instructions for use and maintenance
in the accompanying manual which should be studied.
Symbol for Class II (double insulation).
WARNING:
CAUTION:
TO MINIMISE THE RISK OF FIRE AND ELECTRIC SHOCK,DO NOT EXPOSE
DEVICE TO RAIN OR MOISTURE. DO NOT OPEN THE HOUSING AS IT
CONTAINS DANGEROUS VOLTAGE. ONLY SKILLED TECHNICIANS ARE
ALLOWED TO CARRY OUT REPAIR AND SERVICE.
If the power cord plug is to be replaced, it is important that the replacement is identical
to the plug to be replaced, or that the new plug has been recommended by the
manufacturer.
TO AVOID THE RISK OF ELECTRIC SHOCK, IT IS IMPORTANT TO INSERT THE
PLUG CORRECTLY INTO THE SOCKET.
This DVD player includes a laser system.
There is a risk of dangerous radiation from the laser beam if buttons, controls and
procedures are not used or carried out as described in this manual. To avoid contact
with the laser beam, do not open the device.
DO NOT LOOK DIRECTLY INTO THE LASER BEAM.
03
IMPORTANT SAFETY NOTICES
WARNING: IT IS IMPORTANT THAT YOU STUDY AND OBSERVE BOTH THE INSTRUCTIONS IN THIS MANUAL AND
THE INSTRUCTIONS ON THE DEVICE. KEEP THIS MANUAL FOR FUTURE USE.
This device was developed and made with a view to providing maximum safety for the user. Incorrect use of the device
may cause electric shock or fire. The protection built into this device will protect the user if the procedure below is
observed in connection with installation, use and repair. This device is fully electronic and contains no parts which can be
repaired by the user.
THE HOUSING MUST NOT BE REMOVED. RISK OF DANGEROUS VOLTAGE. ONLY SKILLED TECHNICIANS ARE
ALLOWED TO REPAIR THE DEVICE.
Read the manual
On unpacking the device,
please read the manual
carefully and observe all
instructions given.
Power supply
Only the power supply indicated on the
rating plate must be used for this
device. If you are not sure which power
supply you have, please contact the
distributor or the local electricity
supplier.
Earthing or polarization
If the plug cannot be inserted properly into the
socket, or if the plug does not fit, the device must
not be used in your country.
Ventilation
The housing is provided with slots and
openings to ensure ventilation and reliable
operation and protect the device against
overheating. Do not block or cover these
openings. The openings must never be
blocked, for example by placing the device
on a bed, a sofa, a carpet or similar surface.
Heat
Do not place the device near
sources of heating such as
radiator, register, stove or other
heat-producing devices (including
amplifiers).
Water and moisture
The device must not be placed
close to water, such as bath tub,
wash basin, kitchen sink or
wash tub, in a damp cellar or
close to a swimming pool, etc.
Cleaning
Unplug the device before cleaning.
Do not use liquid detergents and
aerosol cleaning agents. Use a
dry cloth.
Power cords
Wiring must be organised to
prevent people from stepping on
the cables and to avoid pinching
by objects placed on or beside
them. Take special care around
sockets and plug boxes and
where the cable leaves the device.
Overloading
Make sure that sockets,
extension flexes and plug
boxes are not overloaded as
this may lead to fire or electric
shock.
04
IMPORTANT SAFETY NOTICES
Lightning
Unplug the device for additional
protection during thunder or when
the device is not used for prolonged
periods. This will prevent damage to
the device from lightning and surges.
Penetration of objects and liquid
Never push any objects through the
openings into the device, as they may
touch dangerous voltage points or
short circuit parts and cause fire or
electric shock. Do not spill liquid on
the DVD player.
Accessories
The device must not be placed on unstable surfaces
such as a trolley, stand, tripod, shelf or table.
The device may fall and injure children or
adults or be damaged. Use only trolley,
stand, tripod, shelf or table which are very
stable or provided with the device. The
Device must be installed in accordance with the
manufacturer's instructions and by means of installation
equipment recommended by the manufacturer.
If the device is placed on a trolley, the trolley must be
moved carefully. Sudden stops, unnecessary force and
uneven surfaces may cause the trolley to turn over.
Discs
Do not use scratched, deformed or
repaired discs. Such discs will break
easily and may cause serious injury
and damage to the device.
Damage
Unplug the device and contact skilled technicians in the
following cases:
A) If power cord or plug is damaged.
B) If liquid has been spilled on the device or objects
have fallen into the device.
C) If the device has been exposed to rain or water.
D) If the device does not work properly after
adhering to the instructions in the user manual.
Make only the setups mentioned in the manual, as
incorrect setup may cause damage and will often
make it difficult for a skilled technician to make the
device work properly again.
E) If the device has been dropped or damaged in any
other way.
F) When the operation of the device changes drastically,
the device requires service.
Service
Do not attempt to carry out any
service work yourself. By opening or
removing the housing, you will be
exposed to dangerous voltage, etc.
Any service work should be carried
out by skilled technicians.
Disc drive
Keep your hands off the drive
when it closes to avoid trapping
your fingers.
Loads
Do not place heavy loads on the
DVD player, and do not step on it.
The load may fall and cause
serious injury or damage to the
device.
Spare parts
If spare parts are required, make sure that the
technician uses spare parts specified by the
manufacturer or with the same characteristics as the
original component. Unauthorised spare parts may
cause fire, electric shock, etc.
Safety check
After service or repairs on the DVD
player, ask the service technician to
carry out a safety check to ensure
that the device is ready for use.
05
IMPORTANT INFORMATION
Handling instructions
The DVD player's top and back panel may
become warm after prolonged use. This is not due
to a defect.
When the DVD player is not used, remove the
disc and turn off the device.
If the DVD player is not used for a long period, its
function may deteriorate. Therefore, the DVD
player should be turned on and used now and
then.
Protect the power cord
Follow the instructions below to avoid irregular
function, electric shock, fire, or injury:
Hold the plug firmly when inserting it into the
socket
Avoid heat-producing devices
Do not place objects on the power cord
Do not carry out service work on or change the
power cord
Condensation
Condensation may occur in the following cases:
When the DVD player is moved directly from a
cold to a warm place.
When the DVD player is used in a room where
the radiator has just been switched on or where
the cold air from the air condition plant is directed
at the device.
If the DVD player is used in the summer in a
warm and humid room just after it has been
removed from an air conditioned room.
If there is steam or a high level of humidity in the
room.
In case of condensation, the DVD player will not
work properly. Remove the disc and turn off the
device. Unplug the device and leave it for 2-3
hours. The DVD player will then have adapted to
the environment and any condensation will have
disappeared.
Positioning
Do not place the device in any of the following
places:
In sunlight, close to heat-producing devices and
in a closed trolley
At high temperatures (40ºC or above) or high
relative humidity (90% or more)
In dirty places as some internal parts may be
damaged
Do not put your fingers or any
other objects into the device
Touching the internal parts is dangerous and may
cause injury or damage. Do not open the
housing.
Do not place foreign matter on the drive.
Interference
Placing the DVD player near a television set,
radio or video player may cause poor picture and
sound quality. In that case, move the DVD player
further from television set, radio or video player.
NOTE:
An Ø may appear on the screen when the
device is turned on. This means that the
required operation is not available.
06
The following discs can be used:
DISC’S MARKING CONTENTS DIMENSION
SUITABLE DISCS
No other discs than those mentioned above cannot be used.
Non-standard discs cannot be used, not even when marked as above.
The quality of a CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, or DVD-RAM depends on
the way the CD was recorded. In some cases, the quality can be very poor.
07
DISC PROTECTION AND ACCESSORIES
Disc handling
Do not touch the playback side of the disc
Do not put paper or tape on the disc
Cleaning the discs
Finger prints and dust may cause poor sound
and picture quality. Wipe the disc with a dry, soft
cloth. Wipe from the centre out. The disc should
always be clean.
Storing the discs
Do not store the discs where they may be
exposed to direct sunlight or where they are close
to sources of heat.
Do not store the discs where they may be
exposed to moist or dust, for example in a
bathroom or close to a humidifier.
Store the discs standing in a cassette. If the
cassettes are stacked or an object is placed on
the cassettes, the discs may become uneven.
Organisation of discs
Normally, DVD discs are divided into titles, and the
titles are then divided into chapters. Music CDs are
divided into tracks.
If the dust cannot be removed with a soft cloth,
wipe the disc carefully with a moist cloth and then
with a dry cloth.
Do not use any type of solvents such as thinner,
petrol, commercial detergents and anti-static
spray for vinyl records. These may damage the
disc.
Each title, chapter and track has been given a
number, designated title number, chapter number
and track number, respectively.
08
Front panel
FRONT PANEL
R
POWER
132
DV-280 DVD-PLAYER
1. Power
2. Standby LED
3. Display
4. Infrared receiver
5. Open/Close
NEXT
OPEN/CLOSE
4
PLAY/PAUSE
5
PREVIOUS
STOP
7
6
89
10
6. Play/Pause
7. Stop
8. Previous
9. Next
10. DVD tray
11
STANDBY
DV-280
NORMAL PLAYBACK
Preparation
When you wish to watch a DVD film, switch on the
TV-set and choose the video input connected to the
DVD player.
When you wish to listen to the disc from the audio
system, switch on the audio system and choose the
input connected to the DVD player.
Normal playback
1. Press Standby at the front panel to switch on the
DVD player. The start logo appears on the TV
screen. If the disc drive already contains a disc, the
playback will start as soon as the DVD player is
switched on.
2. Press the OPEN/CLOSE button to open the disc
drive and insert a disc.
Discs come in two different sizes. Place the disc
correctly in the disc drive. If the disc does not fit into
the opening, the disc may be damaged and the
device may not work properly.
Do not insert discs which are not suitable for this
type of DVD player.
3. Press the OPEN/CLOSE button to close the disc
drive; the playback will now start.
Press the ENTER/PLAY button if the playback does
not start automatically.
4. Some discs will start by presenting a menu. Use the
cursor button on the remote control to choose
among the different items, then press ENTER/PLAY.
Alternatively, you can enter the number of the
function in question.
Stop playback
1. Press the STOP button to stop the playback. The
start logo will reappear on the TV screen. Some
discs offer the possibility of resuming playback
from the same spot, for example DVDs and music
CDs.
2. Press PLAY to continue playback where the
playback was stopped, or from the start.
3. Press STOP twice the stop the playback
completely.
Previous and next
During playback, press PREV I<< to go back to the
start of the chapter. Press PREV again to go back to
the chapter before that, etc. (please note: this function
depends on the disc format and may vary from one
disc to the other).
With each activation of NEXT >>Iduring playback, the
device will skip the current chapter and go on to the
next.
Fast forward/reverse
1. Press F.FWD >> to go fast forward on the disc. The
speed changes every time F.FWD >> is pressed.
2. Press PLAY to revert to normal playback.
3. Press F.REV << to go fast backward on the disc.
The speed changes every time F.REV << is
pressed.
4. Press PLAY to revert to normal playback.
Pause
1. Press PLAY/PAUSE to stop playback (still picture).
The sound will be deactivated in still mode.
2. Press ENTER/PLAY or PAUSE to continue normal
playback.
13
ADVANCED PLAYBACK
IMPORTANT
All descriptions refer to DVDs. Function and display may vary if other types of discs are used.
14
ADVANCED PLAYBACK
ZOOM
Press this button to enlarge the picture. The size of
the picture changes every time the button is pressed.
NTSC/PAL
Choose between PAL, NTSC, and multi through the
setup menu. In the multi function, the device will find
the right system.
VOLUME and MUTE
Press the volume + button to increase the volume
and the volume - button to reduce the volume. When
MUTE is pressed once, the sound will disappear.
Press once more to restore the sound.
MENU
Press this button to see the main menu and make
the desired choice. (This button can be used for
DVDs with multi-layer menu. Make the desired
choice).
TITLE
On some DVDs, the title menu will be shown when
this button is pressed. Numbers can also be used to
choose the desired tracks.
ANGLE
When watching sports, concerts or a play, press this
button to see the same action from different angles.
(Applies to discs with this function. Some discs were
recorded from several angles, and the desired angle
can be selected, for example from the front, from the
side, the whole picture or from outside).
AUDIO
(selecting audio channel)
Press this button to choose between different
types of sound reproduction, such as:
Audio: 1/2: AC3 2 CH English
Audio: 2/2: AC3 5.1 CH English
15
SPECIAL FEATURES
Playing JPEG files
JPEG files contain picture information which can be encoded by micro computer software and transmitted to the
TV screen via a video output interface. This function is useful in many contexts. For example teachers can
change pictures to be shown in the classroom to JPG files by means of a digital camera or a scanner which are
often used within the IT world and transfer the pictures to CD-R discs. This will make things easier for the pupils
when the teachers play the discs via a TV set or other types of equipment in the classroom. It reduces the
repetitive work for the teachers, and the discs are easy to store (information on discs can be stored for more than
100 years). By means of a digital camera or scanner , families can transfer pictures to CD-R discs. If, for example,
a picture requires 100K bytes, one disc will hold about 6000 pictures. Manufacturers can show their customers
pictures of their products one by one.
Note: The actual contents vary from one type of disc to the other .
1. When a JPEG disc is loaded in the DVD-player, an automatic slide show will be launched.
Each picture will be displayed and scaled to fit the screen.
Press STOP to enter the file library.
Use the SCROLL key to navigate the pictures, and press PLAT or ENTER to display a picture.
When the a picture has been chosen, the slide show will resume with the next picture in the library.
2. Press ANGLE to rotate the picture. These operations are allowed only when a picture is being
displayed normally and will be cancelled automatically when a new picture is displayed.
3. Press ZOOM to execute the zoom function and select the zoom enlarging scale.
In zoom mode, press the SCROLL buttons to move the picture on the screen. With zoom mode off,
the next picture will be scaled to fit the screen.
Press PLAY to cancel the zoom mode and resume the slide show.
JPEG limitations
- JPEG files containing CMYK colors is not supported by this DVD-player.
- The range of pixels should not be exceeding 3840 X 3840 pixels, in order to achieve the best
performance.
16
SPECIAL FEATURES
MP3-disc’s
When playing MP3 discs, a navigation menu appears automatically. Choose the desired file folder from the
menu by means of UP or DOWN and confirm your selection by pressing ENTER/PLAY. Select the desired file
from the file folder by means of UP or DOWN and start playback by pressing ENTER/PLAY. On this page, press
SCROLL LEFT to return to the previous menu and PREV or NEXT to scroll one page back or forward.
DVD Audio is a new sound format which will open new possibilities of reproducing sound in the form of
“Advanced Resolution Stereo” and multi-channel sound. DVD Audio produces a sound of a much better
quality than standard CDs by reproducing up to 24K bit music data compared with 16K bit for standard CDs.
DVD Audio has a frequency of 0-96 KHz. DVD Audio discs are inserted and played just like ordinary music
DVDs.
17
SYSTEM SETUP
Because of the many functions in this DVDplayer, it is not possible to access all functions
via the remote control. So some functions must
be accessed by operating systems setup menu.
The keys used to navigate in the following
explanation is the SETUP-, SCROLL UP-,
SCROLL DOWN-, SCROLL LEFT- and SCROLL
RIGHT-keys.
- Press "SETUP" key on the remote the enter
the setup menu.
You can adjust the following items in the setup
menu.
Language
VideoAudio
Rating
- If the player is playing a disc, you need to
prees "STOP" key twice to make all menu
point accessable..
- After entering the setup menu, the blue
highlight bar shows the present position.
Use the the four "SCROLL" keys (UP, DOWN,
LEFT and RIGHT) to navigate in the setup
menu.
- Confirm the selections by pressing the
"ENTER" key.
- If you want to return to the previous setup
point, press the "UP" key until this happens.
- Press the "SETUP" key to exit the setup menu.
1 LANGUAGE SETUP
1.1 OSD MENU
OSD MENU SETUP:
The user may choose language for the entire
setup menu and the on screen display.
There are six available languages: English,
French, German, Dutch, Danish and Spanish.
Language
OSD Menu
Subtitle
Audio
DVD Menu
VideoAudio
EnglishEnglish
English
English
English
1.2 SUBTITLE
Choose the language to be used as a standard
for subtitles for DVDs (if the DVD supports the
language in question).
You also can choose "Auto" or "off".
Language
OSD Menu
Subtitle
Audio
DVD Menu
VideoAudio
EnglishEnglish
English
English
English
1.3 AUDIO
Dubbing language: Choose the dubbing
language to be used as a standard for DVDs (if
the DVD supports the language).
Rating
French
German
Dutch
Danish
Spanish
Rating
French
German
Dutch
Danish
Spanish
18
Language
OSD Menu
Subtitle
Audio
DVD Menu
VideoAudio
EnglishEnglish
English
English
English
Rating
French
German
Dutch
Danish
Spanish
SYSTEM SETUP
1.4 DVD MENU
DISC MENU: Choose the language to be used as
a standard for menus for DVDs (if the DVD
supports the language in question).
Language
OSD Menu
Subtitle
Audio
DVD Menu
VideoAudio
EnglishEnglish
English
English
English
Rating
French
German
Dutch
Danish
Spanish
2 VIDEO SETUP
2.1 TV SHAPE
Under TV SHAPE choose among different TV
screen formats. There are various types
corresponding to the different discs and TV-sets.
(See also page 23).
2.3 VIDEO OUTPUT
VIDEO OUTPUT:
In this item, you can choose the video output.
Language
TV Shape
TV System
Video Output
VideoAudio
4:3 PS
NTSC
S-VIDEO
Rating
S-VIDEO
YUV
RGB
S-VIDEO: Opens S-VIDEO out
YUV: Opens component YUV out
RGB: Opens RGB out
3 AUDIO SETUP
3.1 Digital Output
Digital out: In this setup item, you can choose the
digital ooutput (SPDIF output).
Language
VideoAudio
Rating
Language
TV Shape
TV System
Video Output
VideoAudio
4:3 PS
NTSC
S-VIDEO
Rating
4:3 PS
4:3 LB
16:9
2.2 TV SYSTEM
This DVD-player supports various systems,
including MULTI (auto), NTSC and PAL.
If the TV set includes only an NTSC or a PAL
system and the wrong type of TV set has been
selected, the screen will flicker and be black/white.
If this happens, press SETUP to make the correct
setups.
Language
TV Shape
TV System
Video Output
VideoAudio
4:3 PS
NTSC
S-VIDEO
Rating
NTSC
PAL
Auto
Digital Out
LPCM Out
RAW
96K
PCM
Raw
This DVD player offers two different types of sound
reproduction.
SPDIF/RAW and SPDIF/PCM: This surround sound
format is transmitted to a Dolby Digital/DTS decoder via
the optical and coaxial socket on the back panel of the
device. This is used when the device is connected only
via an optical or coaxial cable.
19
SYSTEM SETUP
3.2 LPCM Out
Linear PCM setup:This option sets the audio
output format sent using the units coaxial or optical
digital audio output.
LPCM 48K
In the linear PCM setting, “48K” means “the digital
audio output maximum sampling rate is 48KHz”
Therefore, when the title’s encoding sampling rate
is 96KHz, the output will be forced converted to
48KHz.
LPCM 96K
If “96K” is selected, then the maximum output
sampling rate is 96KHz and no conversion will take
place.
Language
Digital Out
LPCM Out
VideoAudio
RAW
96k
Rating
96k
48k
4.2 Parental setup
Parental setup: This function limits the playback of
some disc’s that contains mature scenes. The
limitation varies from disc to disc. When it is
activated, playback is completely prohibited. There
are eight levels of parental settings on the DVDplayer.
In order to change the parental setting, the DVDplayer must be unlocked. See point 4.1
Rating
4 RATING SETUP
4.1 Password
Password setup: In this setup item you can
change your password, and activate the parental
rating.
Locking and unlocking: The padlock symbol in
the right side of the screen, shows if the DVD-player
is locked or unlocked. Simply type in the existing
password to change the status.
Changing the password: Unlock the DVD-player
by typing the existing password. (The DVD-player is
unlocked when the padlock symbol to the right is
opened) Then type your new desired password.
When that is done, the padlock symbol on the right
of the screen will change to be locked again, and
the password is changed.
Language
Parental
Load Factory
VideoAudio
----Password
8.Adult
Reset
Rating
4.3 Reset
Load factory settings: When you select “RESET”,
all the initial settings will be restored to the default
setting.
Language
Parental
Load Factory
VideoAudio
----Password
8.Adult
Reset
Rating
Note:
The default code is 7890
20
TROUBLESHOOTING
PROBLEM POSSIBLE SOLUTION
No power supply Check that the plug has been inserted proper ly
into the socket.
Check the connection between DVD player and
TV set.
No picture
Check that the TV set is working pr operly.
Check the connection between DVD player and
any other connected units.
No sound
Check that TV set and amplifier are working
properly and adjusted correctly.
Check that the disc has been inserted correctly.
The disc is not played
Clean the disc.
Remove any objects blocking the signal
between remote control and DVD player.
Check that the remote contr ol is aimed at the
front panel sensor.
Does not react to signals
from the remote control
Check batteries and replace as required.
Check the disc for dust and scrat ches.
Clean or replace the disc.
Picture interference
Turn off the device, wait for ten seconds and
turn it on again.
No reaction when buttons
are pressed
Power drop-out, power cuts, etc.
Turn off the device, wait for ten seconds and
turn it on again.
This troubleshooting guide may help you find a possible cause of and solution to a problem. If there are still
problems, please contact the local service centre or distributor.
PROBLEMS AND POSSIBLE SOLUTIONS
21
DVD CHARACTERISTICS
The DVD player is your ticket to a home cinema. Every single technical detail in this technology is better than in
any other previous AV equipment. This brand new digital technology compresses the A/V effect from the cinema
down on a disc with a diameter of 12 cm, i.e. the size of a CD. Particularly by means of Dolby Digital and DTS, it
is possible to achieve excellent digital surround sound. The DVD player can also be used with the existing CDs,
CD-Rs and CD-RWs (however, it cannot be used with all CD-RW discs).
Comparison between DVDs and other discs:
Encode
method
Capacity
Playing Time
Disc diameter
Horizontal
resolution
Singleside
singlelayer
4.7G
133
minutes
DVDLD
Digital/MPEG
Double
-side
single
-layer
8.5G
242
minutes
12cm/8cm 12cm/8cm
More than 500 line
Singleside
doublelayer
9.4G
266
minutes
Doubleside
doublelayer
17G
484
minutes
Analog
Single-side
60 minutes
double-side
120 minutes
30cm/20cm
No more than
430 line
SVCD
Digital
650MB650MB650MB
45 minutes
12cm 12cm
No more than
350 line
VCD CD
Digital/
MPEG
74 minutes 74 minutes
No more than
250 line
Digital
I
Picture
proportion
Subtitle
Language
Sound quality
Multiple kinds
32 kinds
8 kinds
48KHz, 96KHz/
6, 20, 24bit
One kind
16 kinds
at most
4 kinds
at most
44.1KHz/
22
16bit
One kind
4 kinds
4 kinds
at most
44.1KHz/
16bit
One kind
2 kinds 2 kinds
44.1KHz/
16bit
44.1KHz/
16bit
Parental control
Support of many different languages
This device allows parental control if the DVD has a
specific certification. This function allows you to
prevent your children from watching things which you
consider inappropriate for them. Refer to the DVD
certification and the accompanying information to find
out if it carries a certification.
Adjusting the size on the TV screen
It is possible to adjust the TV screen in different
ways (see the table).
TV Screen Size
Picture format
on Disc
4:3
Pan Scan
4:3
The DVD player allows you to choose among up to 8
different languages and 32 different subtitles for one
DVD.
Support of many different camera
angles
You can choose yourself, from which camera angle
you wish to watch the DVD.
16:9
Letter-box Wide Screen
16:9
Functions supported by DVDs
DVDs support many different functions and can be
used independent on type of DVD player and
manufacturer. Below is a list of the functions are
supported by this DVD player.
MPEG1, MPEG2, PCM, DOLBY DIGITAL, DTS, ANALOG STEREO
Electric level output: 2.0Vp-p
Electric level output: 1Vp-p
General data
Power
Power
consumption
Dimensions
(HxWxD)
Weight
Operating
temperature
Operating
humidity
Note: We reserve the right to make changes without notice.
220V- 240V~ 50Hz
25W
56 x 430 x 260mm
4.0 kg
oooo
5 C to 35 C (41 F to 95 F)
5% to 90%
24
RIGHTS
This device includes copyright protected technology covered by various American patents and other
intellectual property rights owned by Macrovision Corporation and others. Use of this copyright protected
technology is only allowed after prior approval from Macrovision Corporation, and the device is only to be
used for the showing of films in private homes and other limited areas, unless otherwise approved by
Macrovision Corporation. Reverse construction or demounting is not allowed.
The consumer's attention is attracted to the fact that not all high-definition TV sets are fully compatible with
this device and this may cause picture interference.
In case of problems of the type 525 and 625 progressive scan, the consumer is recommended to switch to
"standard definition". If you have any questions regarding the compatibility of your TV set with this 525p
and 625p DVD player, please contact our customer service.
Made under licence from Dolby Laboratories. “Dolby” and the double D-symbol are trademarks of Dolby
Laboratories. Confidential, unpublished material.
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
25
OWN NOTES
26
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.