Elkay EZS8WS, EZSDWS User Manual

EZH2O® Bottle Filling Station

with Single EZ Cooler

SPECIFICATIONS

PRODUCT SPECIFICATION

Unit shall include electric water cooler with bottle lling station. EZS8WS
shall deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F inlet
water. EZSDWS shall deliver non-chilled drinking water. Units shall
have pushbar activation. Bottle lling unit shall include an electronic
sensor for touchless activation with auto 20-second shut-off timer. Shall
include Green Ticker™ displaying count of plastic bottles saved from waste.
Bottle ller shall provide 1.1-1.5 gpm ow rate with laminar ow to minimize
splashing. Shall include integrated silver ion anti-microbial protection in key
areas. Unit shall meet ADA guidelines. Unit shall be lead-free design which
is certied to NSF/ANSI 61 and 372 and meets Federal and State low-lead
requirements. Unit shall be certied to UL399 and CAN/CSA 22.2 No. 120.

STANDARD FEATURES

• Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)

• Easy-touch front and side pushbar controls (Cooler)

• Integrated Silver Ion Anti-microbial Protection in key areas

• Quick Fill Rate: 1.1 gpm (EZS8WS); 1.5 gpm (EZSDWS)

• Laminar Flow provides minimal splash

• Real Drain System eliminates standing water

• Visual User Interface display includes:

• Innovative Green Ticker™ counts bottles saved from waste

• Available with Flexi-Guard® Safety or Vandal-Resistantt bubbler

(tincludes “VR” code in model no.)

• Cooler panel nishes: Light Gray Granite Vinyl Clad Steel or Stainless Steel

COOLING SYSTEM (Models EZS8WS & EZS8WSVR only)

• Compressor: hermetically-sealed, reciprocating type, single phase.
Sealed-in lifetime lubrication.

• Condenser: Fan cooled, copper tube with aluminum ns. Fan motor is

permanently lubricated.

• Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous
copper tubing with stainless steel tank. Fully insulated with EPS foam
which meets UL requirements for self-extinguishing material.

• Refrigerant Control: Refrigerant R134a is controlled by accurately

calibrated capillary tube.

• Temperature Control: Easily accessible enclosed adjustable thermostat
is factory preset. Requires no adjustment other than for altitude

requirements.

Models EZS8WS & EZSDWS

RATED FOR INDOOR USE ONLY

Models EZS8WSSK
or EZSDWSSK

Models

EZS8WSVRLK or

EZSDWSVRLK

CONSTRUCTION

• Stainless Steel basin with integral drain

• Galvanized structural steel cooler chassis provides
structural integrity

• Stainless steel bottle ller wrapper with ABS plastic Alcove

• Cooler cabinet available as Light Gray Granite Vinyl Clad

Steel or Stainless Steel (additional cost) construction

• Flexi-Guard® Safety Bubbler (option) utilizes an infused

anti-microbial pliable polyester elastomer to prevent

accidental mouth injuries. Flexes on impact.

• Vandal-resistant bubbler (option) is one-piece heavy-duty

chrome-plated

Warranty: 5 year limited warranty on the unit’s refrigeration

system. Electrical components and water system are

warranted for 12 months from date of installation or 18
months from factory shipment, whichever date falls rst.

CAPACITIES CHART

Model

EZS8WS(VR)*K 115V / 60Hz 8.0 GPH 5.0 370 68 lbs.

EZS8WS(VR)*2K 220V / 50Hz 6.7 GPH 2.5 370 68 lbs.

EZS8WS(VR)*3K 220V / 60Hz 8.0 GPH 2.5 370 68 lbs.

EZSDWS(VR)*K 115V/60 Hz

EZSDWS(VR)*2K 220V/50Hz

EZSDWS(VR)*3K 220V/60Hz

*Color code of (L) Light Gray Granite or (S) Stainless Steel cooler panels.
**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.
++Complies; not third party certied.

In keeping with our policy of continuing product improvement,

Elkay reserves the right to change specication without notice.
Please visit elkay.com for the most current version.

Voltage /

Hertz

Chilling**

Capacity

–

–

–

F.L.

Amps

Rated
Watts

1.0 15 42 lbs.

0.5 15 42 lbs.

0.5 15 42 lbs.

Approx.

Ship Wt.

2222 Camden Court
Oak Brook, IL 60523

630-572-3192

UL399

and CAN/

CSA 22.2

No. 120

Certied

ADA

COMPLIANT

ANSI/NSF

61 and 372

Certied

• • • •

++ • • •

++ • • •

• • • •

++ • • •

++ • • •

This specication describes an Elkay product with design, quality and functional
benets to the user. When making a comparison of other producer’s offerings,
be certain these features are not overlooked.

elkay.com

SPEC14-60 (01/2015)

GreenSpec®

Listed

© 2015 Elkay

EZH2O® Bottle Filling Station
with Single EZ Cooler
Models EZS8WS & EZSDWS

IMPORTANT! INSTALLER PLEASE NOTE:

These units are designed and built to provide water to the user which has not
been altered by materials in the cooler waterway. The grounding of electrical

equipment such as telephone, computers, etc. to water lines is a common

procedure. This grounding may be in the building but may also occur away from
the building. This grounding can cause electrical feedback into a water cooler
creating an electrolysis which results in a metallic taste or an increase in the
metal content of the water. This condition is avoidable by installing the cooler
using the proper materials as shown.

Model shown with Flexi-Guard® Safety Bubbler.

17 7/8"

454mm

7"

178mm7"178mm

7/16" X 3/4" OBROUND

(11mm X 19mm) HOLES (6)

ACTIVATION
SENSOR

6 3/8"

162mm

C

L

6 3/8"

162mm

ROUGH-IN DIMENSIONS

RATED FOR INDOOR USE ONLY

NOTICE

This water cooler must be connected to the water supply using a dielectric
coupling. The cooler is furnished with a non- metallic strainer which meets this
requirement. The drain trap which is provided by the installer should also be
plastic to completely isolate the cooler from the building plumbing system.

Bottle Filler unit will mount on bracket attached to wall by 6 holes (as shown).
Water and electrical will connect through pre-punched hole in basin.

3 9/16"
90mm

15"

381mm

19"

483mm

18 7/8"

479mm

9/32"O HOLES

51 9/16"

1310mm

38 1/2"

979mm

28 13/16"

732mm

(7mm) (12)

21 7/8"

556mm

19"

483mm

2"

51mm

B

E

D

17 7/16"
443mm

F

2"

51mm

2"

51mm

3 7/8"

98mm

5 3/4"

146mm

7"

178mm7"178mm

13 15/16"
354mm

E

A

51mm

28 13/16"

732mm

2 7/8"

73mm

2"

FINISHED FLOOR

REDUCE HEIGHT BY 3 INCHES FOR INSTALLATION OF CHILDRENS ADA COOLER

LEGEND:
A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.
B = Recommended Waste Outlet location. To accommodate 1-1/4” nominal drain.
Drain stub 2” (51mm) out from wall.
C = 1-1/4” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet

louvers to wall.

F = 7/16” (11mm) Bolt Holes for fastening to wall.
**New Installations Must Use Ground Fault Circuit Interrupter (GFCI).

HANGER BRACKET

2"

32 7/8"

835mm

ORIFICE
HEIGHT

31 5/16"
796mm

RIM

HEIGHT

27"

686mm

ADA

REQUIREMENT

8 1/16"

205mm

12 1/2"

318mm

C

5 7/8"

150mm

51mm

3"

77mm

Job Name: ____________________________________
Model: _______________________ Qty. ____________
Contact: ______________________________________
Approval Signature: _____________________________
Notes:

2222 Camden Court
Oak Brook, IL 60523

Printed in U.S.A.

© 2015 Elkay

elkay.com