Elkay EZS8S2QJO User Manual

Wall Mount Water Cooler

SPECIFICATIONS

PRODUCT SPECIFICATION

Self-contained, wall mount single electric water cooler. Refrigerated EZS8S2QJO model offers a chilling capacity of 8 gallons per hour of 50°F drinking water, based upon 80°F inlet water and 90°F ambient. Unit shall

meet ADA guidelines. Unit shall be lead-free design which is certied to

NSF/ANSI 61 and 372 and meets Federal and State low-lead requirements.

STANDARD FEATURES

• Easy-Touch pushbar activation

• Extra deep basin minimizes splashing; with integral drain

• Exclusive Flexi-Guard® Safety bubbler

• Valve with built-in ow regulator to provide constant stream from 20 to 105

psi water pressure

• Finish option: Stainless steel wrapper

• Rated for Indoor use

COOLING SYSTEM

• Compressor: Hermetically-sealed, reciprocating type, single phase.

Sealed-in lifetime lubrication.

• Condenser: Fan cooled, copper tube with aluminum ns. Fan motor is

permanently lubricated.

• Cooling Unit: Tube type. Self-cleansing. Continuous copper tubing

which is fully insulated with EPS foam that meets UL requirements for

self-extinguishing material.

• Refrigerant Control: Refrigerant R134a is controlled by accurately

calibrated capillary tube.

• Temperature Control: Easily accessible enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude

requirements.

Model EZS8S2QJO

RATED FOR INDOOR USE ONLY

ONLY AVAILABE FOR QATAR

CONSTRUCTION

• Stainless Steel basin with integral drain

• Galvanized structural steel cooler chassis provides structural integrity

• Cooler cabinet Stainless Steel construction

• Exclusive Flexi-Guard® Safety bubbler utilizes an infused anti-microbial

pliable polyester elastomer to prevent accidental mouth injuries. Flexes

on impact.

Warranty: 5 year limited warranty on the unit’s refrigeration system. Electrical components and water system are warranted for 12 months from date of installation or 18 months from factory shipment,

whichever date falls rst.

CAPACITIES CHART

Model

EZS8S2QJO 240V / 50Hz 6.7 GPH 2.00 370 51 lbs • •

**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.

Voltage /

Hertz

Chilling**

Capacity

F.L.

Amps

Rated

Watts

This specication describes an Elkay product with design, quality and functional benets to the user. When making a comparison of other producer’s offerings, be certain these features are not overlooked.

Approx.

Ship

Wt.

ADA

COMPLIANT

NSF/ANSI

61 and 372

Certied

In keeping with our policy of continuing product improvement,

Elkay reserves the right to change specication without notice. Please visit elkay.com for the most current version.

2222 Camden Court Oak Brook, IL 60523

630-572-3192

elkay.com

SPEC00330 (03/2015)

Open space rough-in design permits new installation or replacement of existing

creating an electrolysis which creates a metallic taste or causes an increase in the

Wall Mount Water Cooler

Models EZS8S2QJO

fountains and coolers with this Elkay cooler when rough-in is within the outline shown.

IMPORTANT! INSTALLER PLEASE NOTE:

This water cooler has been designed and built to provide water to the user which has

not been altered by materials in the cooler waterways.

The grounding of electrical equipment such as telephone, computers, etc to water lines is a common procedure. This grounding may be in the building or occur away from the building. This grounding can cause electrical feedback into a water cooler

metal content of the water. This condition is avoidable by installing the cooler using

the proper materials as shown below.

FRONT VIEW SIDE VIEW

18 3/8"

467mm

9/32" 7mm

6 3/8"

(6)

162mm

‰

6 3/8"

162mm

51mm

ROUGH-IN DIMENSIONS

RATED FOR INDOOR USE ONLY

ONLY AVAILABE FOR QATAR

This water cooler must be connected to the water supply using a dielectric coupling. The cooler is furnished with a non-metallic strainer which meets this requirement. The drain trap, which is provided by the installer, should also be plastic to completely

isolate the cooler from the building plumbing system.

32 7/8"

835mm

ORIFICE HEIGHT

NOTICE

8 1/16"

205mm

19"

484mm

HANGER BRACKET

21 7/8"

556mm

19"

483mm

17 7/16"

443mm

178mm

51mm

3 7/8"

98mm

5 3/4"

146mm

178mm

13 15/16"

354mm

FINISHED FLOOR

REDUCE HEIGHT BY 3” FOR INSTALLATION OF CHILDREN’S ADA COOLER

LEGEND: A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept 3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall. B = Recommended Waste Outlet location. To accommodate 1-1/4” nominal drain.

Drain stub 2” (51mm) out from wall.

C = 1-1/4” Trap (not furnished). D = Electrical Supply (3) Wire Recessed Box Duplex Outlet. E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet louvers to wall. F = 7/16” (11mm) Bolt Holes for fastening to wall. NOTE: New Installations Must Use Ground Fault Circuit Interrupter (GFCI)

28 13/16"

732mm

31 5/16" 796mm

RIM

HEIGHT

27"

686mm

ADA

REQUIREMENT

12 1/2"

318mm

5 7/8"

150mm

77mm

51mm

Job Name: ____________________________________ Model: _______________________ Qty. ____________ Contact: ______________________________________ Approval Signature: _____________________________ Notes:

2222 Camden Court Oak Brook, IL 60523

630-572-3192

elkay.com

Printed in U.S.A.