1333 Butterfield Road, Suite 200 | Downers Grove, IL 60515 | elkay.com ©2020 Elkay Manufacturing Company (1/20) 1000005532.pdf
Page | 1
Dart Canyon Stainless Steel Farmhouse Sink
Installation Instructions
ATTENTION INSTALLER: Carefully read these instructions before you begin.
• Recommend that undermount sinks should be installed by a professional
or experienced installer.
• WARNING: Due to the custom nature of this type of installation, no cutout template is
included. Recommend providing the cabinet maker/installer with the actual sink to be
installed prior to cabinet fabrication. It is further recommended that the installer(s)
discuss this with the customer and agree that the finished appearance is the desired
effect. Not responsible for improper sink or countertop installations.
• Proper installation requires a coordinated effort including advanced dialog between the
designer (or customer), the cabinet maker, the countertop fabricator and the sink
installer during the design and installation phase.
• Not responsible for sink or countertop if damaged during installation.
• Metal edges may be sharp, use caution when handling.
• Inspect sink for damage prior to beginning installation.
• Follow all local plumbing and building codes.
1333 Butterfield Road, Suite 200 | Downers Grove, IL 60515 | elkay.com ©2020 Elkay Manufacturing Company (1/20) 1000005532.pdf
Page | 2
For non-ADA installation with sink base cabinet: a standard sink base cabinet will
need to be modified for a farmhouse apron sink. Due to the height of the ADA-styled
apron, there will be a noticeable 1” (or greater) gap in height spanning the width of the
sink just beneath the sinks apron. A wood finish-matching cabinet filler is recommended
to fill this area.
• When sink and cabinet are correctly matched the sink can rest on side walls of cabinet
and not require side clips. Material may be required to be removed from cabinet to level
sink beneath counter. For non-ADA installation method, installer is responsible for
choosing the proper cabinet type (strong) to support the sink.
Standard Sink Base Cabinet Installation Profile (non-ADA)
Figure 1.