Elkay DXUH312010 User Manual
Dayton®Undermount Double Bowl Sink
S P E C I F I C AT I ON S
GENERAL
Sink is formed of #18 (1.2mm) gauge, 300 series nickel bearing
stainless steel. Undermount.
DESIGN FEATURES
Bowl Depth: 8" (203mm) small bowl,10" (254mm) large bowl.
Underside: Sound dampening pads with spray undercoating to
dampen sound and reduce condensation.
Finish: Exposed surfaces are polished to a Radiant Satin finish.
OTHER
Drain Openings: 3-1/2" (89mm).
NOTE: All Dayton undermount sinks are designed to affix easily
to the underside of any solid surface countertop.
OPTIONAL ACCESSORIES
Bottom Grid: GBG1415SS (small bowl), GBG1318SS (large bowl)
Drain: D1125
Cutting Boards: CB1516 (smallbowl), CBR1316 (largebowl) (sink
must be installed with a 1/2” reveal for cutting board to fit properly)
Rinsing Baskets: LKWRB1316SS (smallbowl), LKWRB1318SS
(largebowl), LKWERBSS (either bowl)
Utensil Caddy: LKWUCSS
Mounting Clip: LKUCLIP8 (2 packages required)
Template: 64180279
Sink complies with ASME A112.19.3/ CSA B45.4
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
C
SINK KIT
DXUH312010LDF includes: (1) Sink - DXUH312010L, (1) Faucet - LK1501CR,
and (2) Drains.
DXUH312010RDF includes: (1) Sink - DXUH312010R, (1) Faucet - LK1501CR,
and (2) Drains.
DXUH312010LDFBG includes: (1) Sink - DXUH312010L, (1) Faucet - LK5000CR,
(1) Bottom Grid - GBG1318SS, and (2) Drains.
DXUH312010RDFBG includes: (1) Sink - DXUH312010R, (1) Faucet - LK5000CR,
(1) Bottom Grid - GBG1318SS, and (2) Drains.
FAUCET FEATURES
LK1501CR
- Chrome finished, single-lever kitchen faucet with side spray.
- Flexible supply tubes with 1/2" (13mm) male IPS adapters.
- Two 1 3/8“ diameter faucet holes required.
LK5000CR
- Chrome finished, single-lever kitchen faucet with pull-down spray.
- Braided stainless steel supply lines.
- Three 1 3/8“ diameter faucet holes required.
Max counter thickness: 2.5” (63mm).
Faucets comply with: ADA, ANSI/NSF61, ASME A112.18.1/CSA B125.1,
cUPC, CA AB1953
Faucet flow rate: 1.5 GPM/5.7 L/min at 60 P.S.I.G.
BOTTOM GRID FEATURES
Nickel-bearing stainless steel
Bright finish
DRAIN FEATURES
Stainless steel body and strainer.
Fits 3-1/2” (89mm) opening.
Model DXUH312010L
Model DXUH312010 Series
Model DXUH312010R
LK1501CR
In keeping with o ur policy o f cont inuing prod uct imp rovement, Elkay reserves the rig ht to change
product specifications wit hout not ice. Please visit elkayusa.com for m ost current version of Elkay
product specification sheets.
Elkay
elkaypro.com
2222 Camden Court
Oak Brook, IL 60523
GBG1318SS
This specificatio n d escribes an Elkay prod uct with d esign, quality and funct ional benefit s to the
user. When making a com parison of other producers’ offerings, be cert ain these featu
overlooked.
LK5000CR
©2013 Elkay
(Rev. 12/13)
res are not
2-59F
S P E C I F I C AT I ON S
SINK DIMENSIONS (INCHES)*
14
13-1/2
Inside
Left Bowl
15-3/4
(400mm)8(203mm)
Model
Number
DXUH312010L 31-3/4
DXUH312010R 31-3/4
*
Length is left to right. Width is front to back.
18-1/4"
(464mm)
15-3/4"
(400mm)
Overall
L W L W D
20-1/2
(521mm)
(806mm)
20-1/2
(521mm)
(806mm)
3" R
(76mm)
(356mm)
(343mm)18(457mm)10(254mm)14(356mm)
Dayton®Undermount Double Bowl Sink
Inside
Right Bowl
L W D
13-1/2
(343mm)18(457mm)10(254mm)36(914mm)
15-3/4
(400mm)8(203mm)36(914mm)
20-1/2"
(521mm)
18"
(457mm)
Minimum
Cabinet
Size
20-1/2"
(521mm)
18"
(457mm)
Model DXUH312010 Series
18-1/4"
(464mm)
15-3/4"
(400mm)
3" R
(76mm)
8”
(203mm)
COUNTERTOP
MOUNTING BRACKET
(OPTIONAL ACCESSORY)
FASTENER
(NOT FURNISHED)
(356mm)
2-1/4" R
(57mm)
14"
31-3/4"
(806mm)
15”
(381mm)
13-1/2"
(343mm)
10"
(254mm)
10"
(254mm)
13-1/2"
(343mm)
2-1/4" R
(57mm)
31-3/4"
(806mm)
15”
(381mm)
14"
(356mm)
Model DXUH312010L Illustrated Model DXUH312010R Illustrated
Electronic Dual Template Mounting Option
(Download DXF File from www.elkayusa.com)
1/2" (13mm) Reveal
1-1/8"
(29mm)
1/2" (13mm)
SILICONE CAULK
(NOT FURNISHED)
SINK
MOUNTING BRACKET
(OPTIONAL ACCESSORY)
1/8" (3mm) Overhang
FASTENER
(NOT FURNISHED)
+
_
1-3/8"
1/4"
(35mm) (6mm)
COUNTERTOP
SILICONE CAULK
(NOT FURNISHED)
SINK
1/8" (3mm) OVERHANG
8"
(203mm)
product specification sheets.
Elkay
elkaypro.com
2222 Camden Court
Oak Brook, IL 60523
©2013 Elkay
(Rev. 12/13) 2-59F
Loading...