Elkay DXUH3118 User Manual
Dayton®Undermount Double Bowl Sink
GENERAL
Sink is formed of #18 (1.2mm) gauge, 300 series nickel bearing
stainless steel. Undermount.
DESIGN FEATURES
Bowl Depth: 8" (203mm).
Underside: Sound dampening pads with spray undercoating to
dampen sound and reduce condensation.
Finish: Exposed surfaces are polished to a Radiant Satin finish.
OTHER
Drain Openings: 3-1/2" (89mm).
NOTE: All Dayton undermount sinks are designed to affix easily
to the underside of any solid surface countertop.
OPTIONAL ACCESSORIES
Bottom Grid: GBG1415SS
Drain: D1125
Cutting Board: CB1516 (sink must be installed with a 1/2” reveal
for cutting board to fit properly)
Rinsing Basket: LKWRB1316SS, LKWERBSS
Utensil Caddy: LKWUCSS
Mounting Clip: LKUCLIP8 (2 packages required)
Template: 1000001471
Sink complies with ASME A112.19.3/ CSA B45.4
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
C
SINK KIT
DXUH3118DF includes: (1) Sink - DXUH3118, (1) Faucet - LK1501CR,
and (2) Drains.
DXUH3118DFBG includes: (1) Sink - DXUH3118, (1) Faucet - LK5000CR,
(1) Bottom Grid - GBG1415SS, and (2) Drains.
FAUCET FEATURES
LK1501CR
- Chrome finished, single-lever kitchen faucet with side spray.
- Flexible supply tubes with 1/2" (13mm) male IPS adapters.
- Two 1 3/8“ diameter faucet holes required.
LK5000CR
- Chrome finished, single-lever kitchen faucet with pull-down spray.
- Braided stainless steel supply lines.
- Three 1 3/8“ diameter faucet holes required.
Max counter thickness: 2.5” (63mm).
Faucets comply with: ADA, ANSI/NSF61, ASME A112.18.1/CSA B125.1,
cUPC, CA AB1953
Faucet flow rate: 1.5 GPM/5.7 L/min at 60 P.S.I.G.
BOTTOM GRID FEATURES
Nickel-bearing stainless steel
Bright finish
DRAIN FEATURES
Stainless steel body and strainer.
Fits 3-1/2” (89mm) opening.
M
odel DXUH3118 SeriesS P E C I F I C AT I O N S
Model DXUH3118
LK1501CR
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
Elkay
elkay.com
2222 Camden Court
Oak Brook, IL 60523
GBG1415SS
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are
not overlooked.
LK5000CR
© 2015 Elkay
(Rev. 02/15)
02-58
S P E C I F I C AT I O N S
SINK DIMENSIONS (INCHES)*
Model
Number
DXUH3118
*
Length is left to right. Width is front to back.
Overall
L W L W D
18-1/4
31-3/4
(451mm)
(806mm)
Inside Bowl
14
(356mm)
15-3/4
(400mm)8(203mm)36(914mm)
Minimum
Cabinet
Size
Dayton®Undermount Double Bowl Sink
M
odel DXUH3118 Series
18-1/4"
(464mm)
15-3/4"
(400mm)
3" R
(76mm)
COUNTERTOP
MOUNTING BRACKET
(OPTIONAL ACCESSORY)
FASTENER
(NOT FURNISHED)
Electronic Dual Template Mounting Option
(Download DXF File from www.elkay.com)
1/2" (13mm) Reveal
1-1/8"
(29mm)
1/2" (13mm)
SILICONE CAULK
(NOT FURNISHED)
SINK
(356mm)
2-1/4" R
(57mm)
MOUNTING BRACKET
(OPTIONAL ACCESSORY)
FASTENER
(NOT FURNISHED)
14"
31-3/4"
(806mm)
15-1/4"
(387mm)
1/8" (3mm) Overhang
14"
(356mm)
+
_
1-3/8"
1/4"
(35mm) (6mm)
8"
(203mm)
COUNTERTOP
SILICONE CAULK
(NOT FURNISHED)
SINK
1/8" (3mm) OVERHANG
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
Elkay
elkay.com
2222 Camden Court
Oak Brook, IL 60523
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are
not overlooked.
© 2015 Elkay
(Rev. 02/15)
02-58
Loading...