Elkay DSEP1515C User Manual
S P E C I F I C AT I O N S
GENERAL
Sink is formed of #20 gauge, 300 series, nickel-bearing stainless steel.
Top mount.
DESIGN FEATURES
Bowl Depth: 6" (152mm)
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Rim Height: 3/16” (5mm)
Faucet Deck: Raised
Finish: Exposed surfaces are polished to an Elite satin finish.
Underside: Fully undercoated.
OTHER
Drain Opening: 2" (51mm)
Installation Hardware: Included for 3/4” (19mm) countertop.
Sink complies with ASME A112.19.3/ CSA B45.4
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
C
These sinks are compliant to ADA and ANSI/ICC A117.1
accessibility requirements when installed according to the
requirements outlined in these standards.
SINK DIMENSIONS (INCHES)*
Cutout in
Countertop
Model
Number
DSEP1515C 2
*
Length is left to right. Width is front to back.
Overall
L W L W D
15
(381mm)15(381mm)
Inside Each Bowl
12
(305mm)
9-1/4
(235mm)6 (152mm)
(1-1/2"(38mm)
Radius Corners)
L W
14-3/8
14-3/8
(365mm)
(365mm)
No. of 1-1/2”
(38mm)Dia. Faucet
Holes 4"(102mm)
Center
Model DSEP1515C
Minimum
Cabinet
Size
18
(457mm)
Dayton® Elite Bar Sink Kit
Model DSEP1515C
SINK PACKAGE
DSEP1515C includes: (1) Sink, (1) Faucet - LK2477CR
and (1) Drain.
LK2477CR
U-Channel Type Mounting System
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
Elkay
elkay.com
2222 Camden Court
Oak Brook, IL 60523
5-1/2"
(140mm)
4"
(102mm)
15”
(381mm)
9-1/4"
(235mm)
12"
(305mm)
15"
(381mm)
1-3/4"
(44mm)
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of others producers offerings, be certain these featrues are
not overlooked.
6"
(152mm)
© 2014 Elkay
(Rev. 06/14)
SPEC00164
Loading...