Elkay DSEJ12522 User Manual
SP ECIFICATIONS
Models DSE12522 and DSEJ12522 Series
GENERAL
Sink is formed of #20 gauge, type 301 series, nickel-bearing stainless steel. Top mount.
DESIGN FEATURES
Bowl Depth: 8- 1/16" (205mm)
Rim Height: 5/32” (4mm)
Faucet Deck: Raised
Coved Corners: 4" (102mm) vertical and 3-1/4" (83mm) horizontal radius
Finish: Exposed surfaces are polished to an Elite Satin finish.
Underside: Fully undercoated.
OTHER
Drain Opening: 3-1/2".
Note: Unless otherwise specified, sink is furnished with 4 faucet
holes as shown.
Installation Hardware: Included for 3/4” (19mm) countertop.
OPTIONAL ACCESSORIES
Bottom Grid: GBG2115SS
Cutting Board: CB1516
Drain: D1125
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
C
National Plumbing Code of Canada.
Dayton®Elite Single Bowl Sink
Model DSE125224
SINKS ARE
MADE IN THE USA
SINK PACKAGE
DSE125224DF includes: (1) Sink - DSE125224, (1) Faucet - LK1001CR,
and (1) Drain.
DSE125223DFBG includes: (1) Sink - DSE125223, (1) Faucet - LK5000CR,
(1) Bottom Grid - GBG2115SS, and (1) Drain.
FAUCET FEATURES
LK1001CR
- Chrome finished, single-lever kitchen faucet with side spray.
- Flexible supply tubes with 1/2" (13mm) male IPS adapters.
LK5000CR
- Chrome finished, single-lever kitchen faucet with pull-down spray.
- Braided stainless steel supply lines.
Faucets comply with: ADA, ANSI/NSF61, ASME A112.18.1/CSA B125.1,
cUPC, CA AB1953
Faucet flow rate: 1.5 GPM/5.7 L/min at 60 P.S.I.G.
BOTTOM GRID FEATURES
Nickel-bearing stainless steel
Bright finish
Dishwasher safe
DRAIN FEATURES
Stainless steel body and strainer.
Fits 3-1/2” (89mm) opening.
LK1001
GBG2115SS
In keeping with o ur policy of c ontinuing p roduct improvement, Elkay reserves the right to change
product specific ations w ithout notice.
Elkay
elkayusa.com
2222 Camden Court
Oak Brook, IL 60523
LK5000
This spec ification describes an Elkay prod uct with design, quality and functio nal benefits to the
user. When making a comp ariso n of other producers’ offerings, be certain t hese features are not
overlooked.
Printed in U.S.A.
©2011 Elkay
(Rev. 8/11) 2-12I
SP ECIFICATIONS
Models DSE12522 and DSEJ12522 Series
SINK DIMENSIONS (INCHES)*
Cutout in
Countertop
8-1/16
(1-1/2"(38mm)
Radius Corners)
24-3/8
21-3/8
(619mm)
(543mm)
1-1/2
"
U-Channel J-Channel
Model Model
Number Number L W
DSE12522 DSEJ12522 1, 2, MR2, 3, 4 or 5
*
Lengt h is lef t to right. Width is front to back.
4"
(102mm)
Overall
L W L W D
25
(635mm)
22
(559mm)21(533mm)
Inside Each Bowl
15-3/4
(400mm)
(206mm)
No. of 1-1/2”
(38mm)Dia. Faucet
Holes 4"(102mm)
Center
Hole Drilling Configurations
(38mm) Diameter Faucet Holes on 4" (102mm) Centers
Dayton®Elite Single Bowl Sink
Minimum
Cabinet
Size
36
21"
(533mm)
25"
(635mm)
Bowl Depth is 8-1/16" (206mm)
15-3/4"
(400mm)
1
22"
(559mm)
4
U-Channel Type Mounting System
2
3MR2
5
J-Channel Type Mounting System
Elkay
elkayusa.com
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 8/11) 2-12I
Loading...