Elkay DSE23322 User Manual

S P E C I F I C AT I O N S

GENERAL

Sink is formed of #20 gauge, 300 series, nickel-bearing stainless steel. Top mount.

DESIGN FEATURES

Bowl Depth: 8-1/16" (206mm) Rim Height: 5/32” (4mm) Faucet Deck: Raised Coved Corners: 4" (102mm) vertical and 3-1/4" (83mm) horizontal radius. Finish: Exposed surfaces are polished to an elite satin finish.

OTHER

Drain Opening: 3-1/2" (89mm) Note: Unless otherwise specified, sink is furnished with 4 faucet holes as shown. Installation Hardware: Included for 3/4” (19mm) countertop.

OPTIONAL ACCESSORIES

Bottom Grid: GBG1415SS Drain: LK35, D1125

Sink complies with ASME A112.19.3/ CSA B45.4

Sinks are listed by IAPMO as meeting the applicable requirements of the Uniform Plumbing Code , International Plumbing Code , and National Plumbing Code of Canada.

SINK PACKAGE

DSE233224DF includes: (1) Sink - DSE233224, (1) Faucet - LK1001CR, and (2) Drains. DSE233223DFBG includes: (1) Sink - DSE233223, (1) Faucet - LK5000CR, (1) Bottom Grid - GBG1415SS, and (2) Drains.

FAUCET FEATURES

LK1001CR

- Chrome finished, single-lever kitchen faucet with side spray.

- Flexible supply tubes with 1/2" (13mm) male IPS adapters. LK5000CR

- Chrome finished, single-lever kitchen faucet with pull-down spray.

- Braided stainless steel supply lines. Faucets comply with: ADA, ANSI/NSF61, ASME A112.18.1/CSA B125.1, cUPC, CA AB1953 Faucet flow rate: 1.5 GPM/5.7 L/min at 60 P.S.I.G.

BOTTOM GRID FEATURES

Nickel-bearing stainless steel Bright finish Dishwasher safe

DRAIN FEATURES

Stainless steel body and strainer. Fits 3-1/2” (89mm) opening.

Dayton

Elite Double Bowl Sink

Models DSE23321 and DSE23322

Model DSE233224

LK1001CR

GBG1415SS

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets.

Elkay

elkay.com

2222 Camden Court

Oak Brook, IL 60523

LK5000CR

This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

(Rev. 01/15)

2-11

S P E C I F I C AT I O N S

SINK DIMENSIONS (INCHES)*

(356mm)

Inside Each Bowl

15-3/4

8-1/16

(206mm)

8-1/16

(206mm)

(400mm)

U-Channel

Model

Number A B C D E L W

DSE233 2 1

DSE233 2 2

Length is left to right. Width is front to back.

Overall

L W L W D

21-1/4

(540mm)

(838mm)

(559mm)

(838mm)

Cutout in

Countertop

(1-1/2"(38mm)

Radius Corners)

32-3/8

(822mm)

(524mm)

32-3/8

(543mm)

(822mm)

20-5/8

21-3/8

No. of 1-1/2”(38mm)

Dia. Faucet Holes

4"(102mm) Center

1, 2 , MR2, 3, 4 or 5

Dayton

Elite Double Bowl Sink

Models DSE23321 and DSE23322

Minimum

Cabinet

Size

(914mm)

4" 4" 4"

C C

E is Bowl Depth

U-Channel Type Mounting System

MR2

Hole Drilling Configurations

1-1/2

(38mm) Diameter Faucet Holes on 4" (102mm) Centers